On 5/18/07, Arthur Marsh <arthur.marsh@xxxxxxxxxxxxxxxx> wrote: > After some tweaking with kmix for my SB0220 card, I found that I had to > set on the INPUT tab: > > Capture red recording light ON, level didn't seem to matter OK, I installed kmix. Now I have Capture and Line (in the Input tab) on, and the levels moderately high. > AC97 red recording light ON, I couldn't find this in the kmix panel. I ran amixer which reports: numid=19,iface=MIXER,name='AC97 Capture Volume' ; type=INTEGER,access=rw---R--,values=2,min=0,max=100,step=0 : values=80,80 | dBscale-min=-40.00dB,step=0.40dB,mute=1 I tried "amixer cset numid=19 80,80 unmute", but that still left it at mute=1. Shouldn't mute have been turned off after this command? > alsamixer was similar, although I just had to enable recording on > "capture" and set the level on "AC97". I'd done this already, without effect. BTW, just checking: you're using snd_emu10k1? Thanks for your help, Mandar. ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
