Re: A blocksize problem about dax and ext4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The block size is 1024.
# dumpe2fs -h /dev/pmem0 | grep "Block size"
dumpe2fs 1.42.13 (17-May-2015)
Block size:               1024

I tried it out on xfs and I succeeded. There are the prompting messages:
# mkfs.xfs -f -b size=1024 /dev/pmem0
meta-data=""             isize=512    agcount=4, agsize=32768 blks
         =                       sectsz=512   attr=2, projid32bit=1
         =                       crc=1        finobt=1
data     =                       bsize=1024   blocks=131072, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0 ftype=1
log      =internal log           bsize=1024   blocks=2571, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0
# mount -o dax /dev/pmem0 /mnt/mem

The mount command doesn't return any message, and I can successfully read or write files in /mnt/mem.

2015-12-24 8:00 GMT+08:00 Dave Chinner <david@xxxxxxxxxxxxx>:
On Wed, Dec 23, 2015 at 09:18:05PM +0000, Elliott, Robert (Persistent Memory) wrote:
>
> > -----Original Message-----
> > From: Linux-nvdimm [mailto:linux-nvdimm-bounces@xxxxxxxxxxxx] On Behalf Of
> > Dan Williams
> > Sent: Wednesday, December 23, 2015 11:16 AM
> > To: Cholerae Hu <choleraehyq@xxxxxxxxx>
> > Cc: linux-nvdimm@xxxxxxxxxxxx
> > Subject: Re: A blocksize problem about dax and ext4
> >
> > On Wed, Dec 23, 2015 at 4:03 AM, Cholerae Hu <choleraehyq@xxxxxxxxx>
> > wrote:
> ...
> > > [root@localhost cholerae]# mount -o dax /dev/pmem0 /mnt/mem
> > > mount: wrong fs type, bad option, bad superblock on /dev/pmem0,
> > >        missing codepage or helper program, or other error
> > >
> > >        In some cases useful info is found in syslog - try
> > >        dmesg | tail or so.
> > > [root@localhost cholerae]# dmesg | tail
> ...
> > > [   81.779582] EXT4-fs (pmem0): error: unsupported blocksize for dax
> ...
>
> > What's the fs block size?  For example:
> > # dumpe2fs -h /dev/pmem0  | grep "Block size"
> > dumpe2fs 1.42.9 (28-Dec-2013)
> > Block size:               4096
> > Depending on the size of /dev/pmem0 it may have automatically set it
> > to a block size less than 4 KiB which is incompatible with "-o dax".
>
> I noticed a few things while trying that out on both ext4 and xfs.
>
> $ sudo mkfs.ext4 -F -b 1024 /dev/pmem0
> $ sudo mount -o dax /dev/pmem0 /mnt/ext4-pmem0
> $ sudo mkfs.xfs -f -b size=1024 /dev/pmem0
> $ sudo mount -o dax /dev/pmem0 /mnt/xfs-pmem0
>
> [  199.679195] EXT4-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk
> [  199.724931] EXT4-fs (pmem0): error: unsupported block size 1024 for dax
> [  859.077766] XFS (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk
> [  859.118106] XFS (pmem0): Filesystem block size invalid for DAX Turning DAX off.
> [  859.156950] XFS (pmem0): Mounting V4 Filesystem
> [  859.183626] XFS (pmem0): Ending clean mount
>
> 1. ext4 fails to mount the filesystem, while xfs just disables DAX.
> It seems like they should they be the same.

I don't really care what is done to ext4 here, but I'm not changing
XFS behaviour. I'm expecting mixed dax/non-dax fileystems to be a
thing, with DAX turned on by an inode flag on disk. Indeed, I see
the mount option going away permanently for XFS, and DAX being
controlled completely from on-disk flags. E.g. ext4 encrypted files
need to turn off DAX, while clear text files can be accessed using
DAX. This should happen completely transparently to the user....

In the situation of block size < page size, there's things we can do
to ensure that XFS will allocate page size aligned/sized extents
(extent size hints FTW). This is the same mechanism that we'll use
to ensure that extents are aligned/sized for reliable huge page
mappings. Hence while DAX /as a global option/ needs to be turned
off for sub-page block size filesystems, there's no reason why we
can't turn DAX on for files that will always allocate blocks
according to DAX constraints.

Cheers,

Dave.
--
Dave Chinner
david@xxxxxxxxxxxxx

_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs

[Index of Archives]     [Linux XFS Devel]     [Linux Filesystem Development]     [Filesystem Testing]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux