On 05/08/2013 12:07 AM, Dave Chinner wrote:
On Tue, May 07, 2013 at 01:18:13PM +0200, Bernd Schubert wrote:
On 05/07/2013 03:12 AM, Dave Chinner wrote:
On Mon, May 06, 2013 at 02:47:31PM +0200, Bernd Schubert wrote:
On 05/06/2013 02:28 PM, Dave Chinner wrote:
On Mon, May 06, 2013 at 10:14:22AM +0200, Bernd Schubert wrote:
And anpther protection fault, this time with 3.9.0. Always happens
on one of the servers. Its ECC memory, so I don't suspect a faulty
memory bank. Going to fsck now-
http://xfs.org/index.php/XFS_FAQ#Q:_What_information_should_I_include_when_reporting_a_problem.3F
Isn't that a bit overhead? And I can't provide /proc/meminfo and
others, as this issue causes a kernel panic a few traces later.
Provide what information you can. Without knowing a single thing
about your hardware, storage config and workload, I can't help you
at all. You're asking me to find a needle in a haystack blindfolded
and with both hands tied behind my back....
I see that xfs_info, meminfo, etc are useful, but /proc/mounts?
Maybe you want "cat /proc/mounts | grep xfs"?. Attached is the
output of /proc/mounts, please let me know if you were really
interested in all of that non-xfs output?
Yes. You never know what is relevant to a problem that is reported,
especially if there are multiple filesystems sharing the same
device...
Hmm, I see. But you need to extend your questions to multipathing and
shared storage. Both time you can easily get double mounts... I probably
should try to find some time to add ext4s MMP to XFS.
And I just wonder what you are going to do with the information
about the hardware. So it is an Areca hw-raid5 device with 9 disks.
But does this help? It doesn't tell if one of the disks reads/writes
with hickups or provides any performance characteristics at all.
Yes, it does, because Areca cards are by far the most unreliable HW
RAID you can buy, which is not surprising because they are also the
Ahem. Compared to other hardware raids Areca is very stable.
cheapest. This is through experience - we see reports of filesystems
being badly corrupted ever few months because of problems with Areca
controllers.
The problem is that telling the hardware controller does not tell
anything about disks. And most raid solutions do not care at all about
disk corruptions, thats getting better with T10DIF/DX, but unfortunately
I still don't see that used most installations.
As I'm aware of that problem for several years we started to write
ql-fstest [1] several years ago, which checks for data corruption. That
is also part of our stress test suite and so far it didn't report
anything. So we can exclude disks/controller data corruption with a very
high probability.
You might want to add to your FAQ something like:
Q: Are you sure there is not disk / controller / memory data corruption?
If so please state why!
Cheers,
Bernd
[1] https://bitbucket.org/aakef/ql-fstest
_______________________________________________
xfs mailing list
xfs@xxxxxxxxxxx
http://oss.sgi.com/mailman/listinfo/xfs
