hai siva
When you run XFree86 -configure, it will generate a file named XF86Config or
XF86Config.new and this u need to copy to /etc/X11 as XF86Config, just check
this.
Regards
Arun
----- Original Message -----
From: "Sivakumar" <rj.sivakumar@xxxxxxxxxxx>
To: <xfree86@xxxxxxxxxxx>
Sent: Thursday, September 21, 2006 6:19 PM
Subject: Re: Xserver deployment to target board
hi arun,
For your information the below sent mail was for this project only,
we have tried in running XFree86 -configure, which gives a large information
i
couldnt able to copy here,hence iam attaching the file info with this
mail.And also i couldnt able to XF86config from two config files
./usr/X11R6/lib/X11/XF86Config.98
./usr/X11R6/lib/X11/XF86Config.eg
Please suggest me to overcome this
Thanks in advance
Regards
sivakumar
> Hello,
>
> Have u run XFree86 -configure first , which will generate a XF86config
file
> and which u should copy to the /etc/X11 folder and then try to start X.
>
> Regards
> Arun
> hi,
> iam trying to start the startx of Xserver, but its giving the
following
> error,please suggest me to overcome this.
> regards,
> sivakumar.R.J
>
>
> _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
> _XSERVTransOpen: transport open failed for inet6/Dyansys:0
> _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
>
> XFree86 Version 4.6.0
> Release Date: 10 May 2006
> X Protocol Version 11, Revision 0
> Build Operating System: DefaultOSName [ELF]
> Current Operating System: Linux Dyansys 2.6.16.19-mx31 #1 PREEMPT Thu Sep
21
> 15:39:23 IST 2006 armv6l
> Build Date: 29 August 2006
> Changelog Date: 10 May 2006
> Before reporting problems, check http://www.XFree86.Org/
> to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (EE) error, (WW) warning,
> (II) informational, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/XFree86.0.log", Time: Thu Jan 1 00:08:34 1970
> (EE) Unable to locate/open config file.
>
> Fatal server error:
> xf86EnableIOPorts: Failed to set IOPL for I/O
>
>
> When reporting a problem related to a server crash, please send
> the full server output, not just the last messages.
> This can be found in the log file "/var/log/XFree86.0.log".
>
On Wednesday 20 September 2006 7:29 pm, arun wrote:
> Hai ,
>
> Just copy the lib files from X11R6 directory to /lib or update the
> LD_LIBRARY_PATH it will work
>
>
> Arun
> ----- Original Message -----
> From: harshavardhanreddy mandeepala
> To: xfree86@xxxxxxxxxxx
> Sent: Wednesday, September 20, 2006 6:57 PM
> Subject: Xserver deployment to target board
>
>
> Hi All,
> I have Xcompiled Xfree86-4.6 for my ARM11 Target.
> To my targetboard i have already ported root filesystem and it is
> working fine. I used NFS to deploy file system to my target development
> board. Now I Kept all my XServer libraries in /usr/X11R6 directory and
> Include files in corresponding location. Any other settings or
> configurations i have to do to make Xserver to work in my target board. If
> any body have idea kindly inform the procedure or any related documents.
> Infact when i try to run startx in the target using minicom it is giving
> folllowing error message. Host name lookup failure
> xauth : error while loading shared libraries:libxmuu.so.1:cannot open
> shared object file .......................................
>
> Thanks in advance.
>
> Regards,
> Harsha
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86
