did you tried to add BusID to config like this? Section "Device" Identifier "Radeon X300" Driver "radeon" Screen 0 BusID "PCI:3:0:0" #add this line EndSection Section "Device" Identifier "Radeon X300#2" Driver "radeon" Screen 1 BusID "PCI:3:0:1" EndSection On 5/31/06, A. Kalten <akalten@xxxxxxxxxxx> wrote:
Greetings, I needed a simple and inexpensive video card to get my system up and running, and so I acquired the Sapphire Radeon X300. Supposedly, this card, which is based on the ATI Radeon RV370 chip, should function with XFree86 but the server fails to load. Here are the relevant lines from the log: [...] (II) PCI: 03:00:0: chip 1002,5b60 card 174b,0610 rev 00 class 03,00,00 hdr 80 (II) PCI: 03:00:1: chip 1002,5b70 card 174b,0611 rev 00 class 03,80,00 hdr 00 (II) PCI: End of PCI scan [...] (II) Primary Device is: PCI 03:00:0 (WW) RADEON: No matching Device section for instance (BusID PCI:3:0:1) found (EE) No devices detected. The warning should be of no consequence because this card has two output connectors but only the primary connector is being used. The other is not attached to any monitor or display. The relevant XF86Config lines are: Section "Device" Identifier "Radeon X300" Driver "radeon" Screen 0 EndSection Section "Device" Identifier "Second Radeon Port" Driver "radeon" Screen 1 EndSection Section "Screen" Identifier "Screen1" Device "Radeon X300" Monitor "G225f" DefaultDepth 24 Subsection "Display" Depth 24 Modes "800x600" "1280x1024" "1600x1200" "2048x1536" ViewPort 0 0 EndSubsection EndSection Is XFree86-4.6.0 able to drive this card? Is there a way to configure XF86Config to get this card to function? Or am I just wasting time with this hardware? Andrew Kalten _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
_______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
