refresh frecuency

[<EAGOMEZC@xxxxxxxxxxxxx>]

Hi,

 

I am trying to configure the vertical refresh at 100 hz, but I do not.

 

I am using RedHat EWS 3.0 Update 1 with XFree86 4.3.0.

 

 

I configure XF86Config with this values.

 

Section "Monitor"

        Identifier   "Monitor0"

        VendorName   "Monitor Vendor"

        ModelName    "Dell 2000FP (Digital)"

        HorizSync    31.5 - 80.0

        VertRefresh  56.0 - 100.0

        Option      "dpms"

EndSection

 

 

The log file show this messages, and there are not a mode  with 100 Hz.

 

(**) NVIDIA(0): Validated modes for display device CRT-1:
(**) NVIDIA(0):      Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "1152x864": 121.5 MHz, 77.5 kHz, 85.1 Hz
(**) NVIDIA(0):      Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(**) NVIDIA(0):      Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0):      Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.0 Hz (I)
(**) NVIDIA(0):      Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(0):      Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0):      Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(0):      Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0):      Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0):      Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0):      Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(0):      Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(**) NVIDIA(0):      Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0):      Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NVIDIA(0): Virtual screen size determined to be 2560 x 1024

 

This refresh rate is supported for the video card and monitor.

 

How can I verify that X is using 100 Hz. ?

 

With the log´lines show above, I can assure that  X is not using 100 Hz ?

 

Thank in advance.

 

 

AVISO LEGAL:
Esta información es privada y confidencial y está dirigida únicamente a su destinatario. Si usted no es el destinatario original de este mensaje y por este medio pudo acceder a dicha información por favor elimine el mensaje. La distribución o copia de este mensaje está estrictamente prohibida. Esta comunicación es sólo para propósitos de información y no debe ser considerada como propuesta, aceptación ni como una declaración de voluntad oficial de REPSOL YPF S.A. y/o subsidiarias y/o afiliadas. La transmisión de e-mails no garantiza que el correo electrónico sea seguro o libre de error. Por consiguiente, no manifestamos que esta información sea completa o precisa. Toda información está sujeta a alterarse sin previo aviso.

This information is private and confidential and intended for the recipient only. If you are not the intended recipient of this message you are hereby notified that any review, dissemination, distribution or copying of this message is strictly prohibited. This communication is for information purposes only and shall not be regarded neither as a proposal, acceptance nor as a statement of will or official statement from REPSOL YPF S.A. and/or subsidiaries and/or affiliates. Email transmission cannot be guaranteed to be secure or error-free. Therefore, we do not represent that this information is complete or accurate and it should not be relied upon as such. All information is subject to change without notice.