Hi,
I am trying to configure my system for dual display,
using two single-head display adapters.
I have attached relevant files.
Both sets of display hardware are recognized by PCI
scans. However, when XFree86 starts, it reports that
there is "No matching device section" for the second
set of display hardware. (Please refer to attached
files). I do have two sections in XF86Config with
correct (I think) PCI addresses set up. I cannot
understand why it cannot find the device section for
00:13:00.
Any advice would be greatly appreciated as I am out of
ideas :-)
Regards
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
[root@localhost root]# lspci
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03
)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:09.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1 (rev 12)
00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80)
00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139
C+ (rev 10)
00:0d.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev b1)
01:00.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev b1)
[root@localhost root]#
[root@localhost root]#
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x8086 device 0x7190
Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
CardVendor 0x10f7 card 0x8336 (Matsushita Electric Industrial Co., Ltd., Card unknown)
STATUS 0x2210 COMMAND 0x0106
CLASS 0x06 0x00 0x00 REVISION 0x03
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE0 0xf8000008 addr 0xf8000000 MEM PREFETCHABLE
pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x8086 device 0x7191
Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
STATUS 0x0220 COMMAND 0x001f
CLASS 0x06 0x04 0x00 REVISION 0x03
HEADER 0x01 LATENCY 0x80
PRIBUS 0x00 SECBUS 0x01 SUBBUS 0x01
SECLT 0x40 SECSTATUS 0xa2a0
IOBASE 0xf000 IOLIM 0x0fff
NOPREFETCH_MEMBASE 0xf4000000 MEMLIM 0xf7ffffff
PREFETCH_MEMBASE 0xfff00000 MEMLIM 0x000fffff
FAST_B2B NO_SEC_BUS_RST NO_M_ABRT VGA_EN ISA_EN NO_SERR_EN NO_PERR_EN
pci bus 0x0000 cardnum 0x07 function 0x00: vendor 0x8086 device 0x7110
Intel Corp. 82371AB/EB/MB PIIX4 ISA
STATUS 0x0280 COMMAND 0x000f
CLASS 0x06 0x01 0x00 REVISION 0x02
BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x00
pci bus 0x0000 cardnum 0x07 function 0x01: vendor 0x8086 device 0x7111
Intel Corp. 82371AB/EB/MB PIIX4 IDE
STATUS 0x0280 COMMAND 0x0005
CLASS 0x01 0x01 0x80 REVISION 0x01
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE4 0x00001061 addr 0x00001060 I/O
BYTE_0 0x07 BYTE_1 0xa3 BYTE_2 0x07 BYTE_3 0xa3
pci bus 0x0000 cardnum 0x07 function 0x02: vendor 0x8086 device 0x7112
Intel Corp. 82371AB/EB/MB PIIX4 USB
STATUS 0x0280 COMMAND 0x0005
CLASS 0x0c 0x03 0x00 REVISION 0x01
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE4 0x0000fc21 addr 0x0000fc20 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x04 INT_LINE 0x0a
pci bus 0x0000 cardnum 0x07 function 0x03: vendor 0x8086 device 0x7113
Intel Corp. 82371AB/EB/MB PIIX4 ACPI
STATUS 0x0280 COMMAND 0x0003
CLASS 0x06 0x80 0x00 REVISION 0x02
BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x00
BYTE_0 0x01 BYTE_1 0x10 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x09 function 0x00: vendor 0x125d device 0x1988
ESS Technology ES1988 Allegro-1
CardVendor 0x10f7 card 0x833f (Matsushita Electric Industrial Co., Ltd., Card unknown)
STATUS 0x0290 COMMAND 0x0001
CLASS 0x04 0x01 0x00 REVISION 0x12
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE0 0x00001401 addr 0x00001400 I/O
MAX_LAT 0x18 MIN_GNT 0x02 INT_PIN 0x01 INT_LINE 0x0a
BYTE_0 0x7f BYTE_1 0x90 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x0a function 0x00: vendor 0x1180 device 0x0478
Ricoh Co Ltd RL5c478
STATUS 0x0210 COMMAND 0x0007
CLASS 0x06 0x07 0x00 REVISION 0x80
BIST 0x00 HEADER 0x82 LATENCY 0x40 CACHE 0x00
BASE0 0x10000000 addr 0x10000000 MEM
BASE1 0x40020200020000dc addr 0x40020200020000d0 MEM PREFETCHABLE 64BIT
MAX_LAT 0x07 MIN_GNT 0x80 INT_PIN 0x01 INT_LINE 0x0a
BYTE_0 0xf7 BYTE_1 0x10 BYTE_2 0x36 BYTE_3 0x83
pci bus 0x0000 cardnum 0x0a function 0x01: vendor 0x1180 device 0x0478
Ricoh Co Ltd RL5c478
STATUS 0x0210 COMMAND 0x0007
CLASS 0x06 0x07 0x00 REVISION 0x80
BIST 0x00 HEADER 0x82 LATENCY 0x40 CACHE 0x00
BASE0 0x10001000 addr 0x10001000 MEM
BASE1 0x40030300020000dc addr 0x40030300020000d0 MEM PREFETCHABLE 64BIT
MAX_LAT 0x07 MIN_GNT 0x80 INT_PIN 0x02 INT_LINE 0x0a
BYTE_0 0xf7 BYTE_1 0x10 BYTE_2 0x36 BYTE_3 0x83
pci bus 0x0000 cardnum 0x0b function 0x00: vendor 0x10ec device 0x8139
Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
CardVendor 0x10f7 card 0x8338 (Matsushita Electric Industrial Co., Ltd., Card unknown)
STATUS 0x0290 COMMAND 0x0003
CLASS 0x02 0x00 0x00 REVISION 0x10
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE0 0x00001801 addr 0x00001800 I/O
BASE1 0xec000000 addr 0xec000000 MEM
MAX_LAT 0x40 MIN_GNT 0x20 INT_PIN 0x01 INT_LINE 0x0a
pci bus 0x0000 cardnum 0x0d function 0x00: vendor 0x126f device 0x0720
Silicon Motion, Inc. SM720 Lynx3DM
CardVendor 0x10f7 card 0x8341 (Matsushita Electric Industrial Co., Ltd., Card unknown)
STATUS 0x0230 COMMAND 0x0000
CLASS 0x03 0x00 0x00 REVISION 0xb1
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE0 0xf0000000 addr 0xf0000000 MEM
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0a
BYTE_0 0x01 BYTE_1 0x50 BYTE_2 0x01 BYTE_3 0x06
pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x126f device 0x0720
Silicon Motion, Inc. SM720 Lynx3DM
CardVendor 0x10f7 card 0x8341 (Matsushita Electric Industrial Co., Ltd., Card unknown)
STATUS 0x0230 COMMAND 0x001b
CLASS 0x03 0x00 0x00 REVISION 0xb1
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE0 0xf4000000 addr 0xf4000000 MEM
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0xff
BYTE_0 0x01 BYTE_1 0x50 BYTE_2 0x01 BYTE_3 0x06
# XFree86 Configuration File
Section "ServerLayout"
Identifier "Default Layout"
# Identifier "TwinDisplays"
# Screen "Screen0" LeftOf "Screen1"
# Screen "Screen1"
# Option "Xinerama" "on"
Screen "Screen0" 0 0
# Screen "Screen1" RightOf "Screen0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "jp106"
Option "XkbLayout" "jp"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Generic Laptop Display Panel 1280x1024"
HorizSync 31.5 - 67.0
VertRefresh 50.0 - 75.0
Option "dpms"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Generic Laptop Display Panel 1280x1024"
HorizSync 31.5 - 67.0
VertRefresh 50.0 - 75.0
Option "dpms"
EndSection
####################################################
#
# Device Sections
#
####################################################
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "pci_burst" # [<bool>]
#Option "fifo_conservative" # [<bool>]
#Option "fifo_moderate" # [<bool>]
#Option "fifo_aggressive" # [<bool>]
#Option "pci_retry" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "set_mclk" # <freq>
#Option "show_cache" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "ByteSwap" # [<bool>]
#Option "Interlaced" # [<bool>]
#Option "UseBIOS" # [<bool>]
#Option "ZoomOnLCD" # [<bool>]
Identifier "Card0"
Driver "siliconmotion"
VendorName "Silicon Motion, Inc."
BoardName "SM720 Lynx3DM"
BusID "PCI:1:0:0"
# Screen 0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "pci_burst" # [<bool>]
#Option "fifo_conservative" # [<bool>]
#Option "fifo_moderate" # [<bool>]
#Option "fifo_aggressive" # [<bool>]
#Option "pci_retry" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "set_mclk" # <freq>
#Option "show_cache" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "ByteSwap" # [<bool>]
#Option "Interlaced" # [<bool>]
#Option "UseBIOS" # [<bool>]
#Option "ZoomOnLCD" # [<bool>]
Identifier "Card1"
Driver "siliconmotion"
VendorName "Silicon Motion, Inc."
BoardName "SM720 Lynx3DM"
BusID "PCI:0:13:0"
# Screen 1
EndSection
####################################################
#
# Screen Sections
#
####################################################
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Output from lspci
-------------------------------------------------------------------------------
[root@localhost root]# lspci
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03
)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:09.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1 (rev 12)
00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80)
00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139
C+ (rev 10)
00:0d.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev b1)
01:00.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev b1)
[root@localhost root]#
-------------------------------------------------------------------------------
