Is it possible to get Xfree86 running when there is no monitor attached(integrated video card)? I've got an application that needs to send it's output to a display(even though we don't care about it), and it refuses to work with Xvfb. I'm running AS 3 on a DL360 with the integrated ATI card, and all I want to do is get the screen 0 to work. I ran Xfree86 -configure to create a new conf file, it is shown below. I get this when I start Xfree86 -xf86config /root/XF86Config.new:
OS Kernel: Linux version 2.4.21-20.ELsmp (bhcompile@xxxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-42)) #1 SMP Wed Aug 18 20:46:40 EDT 2004
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Jul 12 12:26:35 2005
(++) Using config file: "/root/XF86Config.new"
(WW) ATI(0): Failed to set up write-combining range (0xef000000,0x800000)
(WW) ATI(0): Failed to set up write-combining range (0xef000000,0x800000)
Here is the conf file. I set an xhost +:
# xhost +
access control disabled, clients can connect from any host
root@schla003 # (WW) ATI(0): Failed to set up write-combining range (0xef000000,0x800000)
and tried exporting the DISPLAY to another server and ran xterm, got this error:
AUDIT: Tue Jul 12 12:28:14 2005: 20549 XFree86: client 1 rejected from IP x.x.x.x port 62921
Thanks in advance for any assistance.
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "accel" # [<bool>]
#Option "crt_display" # [<bool>]
#Option "composite_sync" # [<bool>]
#Option "hw_cursor" # [<bool>]
#Option "linear" # [<bool>]
#Option "mmio_cache" # [<bool>]
#Option "panel_display" # [<bool>]
#Option "probe_clocks" # [<bool>]
#Option "reference_clock" # <freq>
#Option "shadow_fb" # [<bool>]
#Option "sw_cursor" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI"
BoardName "Rage XL"
ChipSet "ati"
ChipId 0x4752
ChipRev 0x27
BusID "PCI:0:3:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
Adam
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86
