Trying to get XFree86 4.5.0 running on my thinkpad. It runs OK but I cannot get
it to use any resolution other than 640x480.
Extract from log:
(--) SAVAGE(0): Found 13 modes at this depth:
[10e] 320 x 200, 70Hz
[111] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
[114] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
[117] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 43Hz, 100Hz
[11a] 1280 x 1024, 60Hz, 75Hz, 85Hz, 43Hz
[11d] 640 x 400, 70Hz
[122] 1600 x 1200, 48Hz, 60Hz, 75Hz, 85Hz
[133] 320 x 240, 72Hz
[13c] 1400 x 1050, 60Hz, 75Hz
[143] 400 x 300, 72Hz
[153] 512 x 384, 70Hz
[173] 720 x 480, 75Hz
[178] 720 x 576, 75Hz
a) It fails to say *what* depth and b) specifying any of them in a modes lines
results in
(II) SAVAGE(0): Not using mode "800x600" (no mode of this name) - But if you
specify 640x480 it does not complain.
xvidtune only shows 640x480 and xf86cfg does not show all the above - and in
any case choosing one from the ones it *does* makes no difference.
Also, even if the modes *did* work, you can't flip through them because you
need control-alt-[+-] where the +- is on the *keypad* I can't get the num lock
to come on in an xterm.
Anyone?
--
Regards
Dave Saville
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86
