On Wed, 8 Dec 2004, Ed Vazquez wrote: > Thanks! > > I think I found the correct lines from the log file (see below), > but I'm still having the issue previously described. No, you don't appear to be using the DVI interface. (II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V Are you using the VGA connector (analog) or the DVI connector (digital)? I assumed you were trying to use the digital connector. If you are using the VGA connector, then it's just a modeline issue and the monitor will likely be pretty particular. The modeline it's trying to use: (**) NV(0): *Mode "1280x1024": 137.9 MHz, 79.8 kHz, 75.0 Hz (II) NV(0): Modeline "1280x1024" 137.89 1280 1336 1616 1728 1024 1026 1038 1064 may be too close to the monitor's limits, or perhaps the monitor's advertised limits only apply to the digital connector. In that case, you should try a more conservative 60 Hz mode (just lowering the upper limit on the VertRefresh in the XF86Config should do it). But if you've got a DVI cable handy, you might want to try that instead. That may be easier to get working. Mark. > > Can someone more familiar with XFree86 take a look and see what > I might have hosed up? > > I generated the custom ModeLine entries using the Colas modeline > generator (http://koala.ilog.fr/cgi-bin/nph-colas-modelines) and > setting the reported max Bandwidth, Vertical and Horizontal > frequencies. > > I also tried using the "gtf" tool from the FreeBSD nVidia driver > page (http://www.soulwax.net/nvidia/) and the ModeLines it > generated were even worse. > > ./gtf 1280 1024 75 -v > 1: [H PIXELS RND] : 1280.000000 > 2: [V LINES RND] : 1024.000000 > 3: [V FIELD RATE RQD] : 75.000000 > 4: [TOP MARGIN (LINES)] : 0.000000 > 5: [BOT MARGIN (LINES)] : 0.000000 > 6: [INTERLACE] : 0.000000 > 7: [H PERIOD EST] : 12.471544 > 8: [V SYNC+BP] : 44.000000 > 9: [V BACK PORCH] : 41.000000 > 10: [TOTAL V LINES] : 1069.000000 > 11: [V FIELD RATE EST] : 75.007050 > 12: [H PERIOD] : 12.472716 > 13: [V FIELD RATE] : 75.000000 > 14: [V FRAME RATE] : 75.000000 > 15: [LEFT MARGIN (PIXELS)] : 0.000000 > 16: [RIGHT MARGIN (PIXELS)] : 0.000000 > 17: [TOTAL ACTIVE PIXELS] : 1280.000000 > 18: [IDEAL DUTY CYCLE] : 26.258184 > 19: [H BLANK (PIXELS)] : 448.000000 > 20: [TOTAL PIXELS] : 1728.000000 > 21: [PIXEL FREQ] : 138.542389 > 22: [H FREQ] : 80.174995 > 17: [H SYNC (PIXELS)] : 136.000000 > 18: [H FRONT PORCH (PIXELS)] : 88.000000 > 36: [V ODD FRONT PORCH(LINES)] : 1.000000 > > # 1280x1024 @ 75.00 Hz (GTF) hsync: 80.17 kHz; pclk: 138.54 MHz > Modeline "1280x1024_75.00" 138.54 1280 1368 1504 1728 1024 1025 1028 1069 -HSync +Vsync > > -- > Ed Vazquez > > I never give them hell; I just tell them the truth and they > think it is hell. > - Harry S. Truman > > >From my XF86Config: > > Section "Monitor" > > Identifier "Dell 1901FP" > HorizSync 30-80 > VertRefresh 56-76 > > ModeLine "1152x864" 104.14 1152 1200 1440 1536 864 866 878 904 #75Hz > ModeLine "1280x1024" 137.89 1280 1336 1616 1728 1024 1026 1038 1064 #75Hz > > EndSection > > Section "Device" > Identifier "NVIDIA QuadroFX 1000" > Driver "nv" > EndSection > > Section "Screen" > Identifier "Screen 1" > Device "NVIDIA QuadroFX 1000" > Monitor "Dell 1901FP" > DefaultDepth 24 > > Subsection "Display" > Depth 8 > Modes "1280x1024" "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 16 > Modes "1280x1024" "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 24 > Modes "1280x1024" "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 32 > Modes "1280x1024" "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubsection > EndSection > > >From /var/log/XFree86.0.log: > > (II) NV(0): Probing for EDID on I2C bus B... > (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0. > (II) NV(0): I2C device "DDC:ddc2" removed. > (--) NV(0): DDC detected a CRT: > (II) NV(0): Manufacturer: DEL Model: 4000 Serial#: 1095125838 > (II) NV(0): Year: 2004 Week: 27 > (II) NV(0): EDID Version: 1.3 > (II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V > (II) NV(0): Sync: Separate Composite SyncOnGreen > (II) NV(0): Max H-Image Size [cm]: horiz.: 38 vert.: 31 > (II) NV(0): Gamma: 2.20 > (II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display > (II) NV(0): Default color space is primary color space > (II) NV(0): First detailed timing is preferred mode > (II) NV(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581 > (II) NV(0): blueX: 0.143 blueY: 0.102 whiteX: 0.310 whiteY: 0.330 > (II) NV(0): Supported VESA Video Modes: > (II) NV(0): 720x400@70Hz > (II) NV(0): 640x480@60Hz > (II) NV(0): 640x480@75Hz > (II) NV(0): 800x600@60Hz > (II) NV(0): 800x600@75Hz > (II) NV(0): 1024x768@60Hz > (II) NV(0): 1024x768@75Hz > (II) NV(0): 1280x1024@75Hz > (II) NV(0): Manufacturer's mask: 0 > (II) NV(0): Supported Future Video Modes: > (II) NV(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 > (II) NV(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 > (II) NV(0): Supported additional Video Mode: > (II) NV(0): clock: 108.0 MHz Image Size: 376 x 301 mm > (II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 > (II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 > (II) NV(0): Serial No: 5Y232472AFKN > (II) NV(0): Monitor name: DELL 1901FP > (II) NV(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 80 kHz, PixClock > max 140 MHz > (--) NV(0): CRTC 0 appears to have a CRT attached > (II) NV(0): Using CRT on CRTC 0 > (--) NV(0): VideoRAM: 131072 kBytes > (==) NV(0): Using gamma correction (1.0, 1.0, 1.0) > (II) NV(0): Dell 1901FP: Using hsync range of 30.00-80.00 kHz > (II) NV(0): Dell 1901FP: Using vrefresh range of 56.00-76.00 Hz > (II) NV(0): Clock range: 12.00 to 350.00 MHz > (II) NV(0): Not using default mode "640x350" (vrefresh out of range) > (II) NV(0): Not using default mode "320x175" (vrefresh out of range) > (II) NV(0): Not using default mode "640x400" (vrefresh out of range) > (II) NV(0): Not using default mode "320x200" (vrefresh out of range) > (II) NV(0): Not using default mode "720x400" (vrefresh out of range) > (II) NV(0): Not using default mode "360x200" (vrefresh out of range) > (II) NV(0): Not using default mode "640x480" (vrefresh out of range) > (II) NV(0): Not using default mode "320x240" (vrefresh out of range) > (II) NV(0): Not using default mode "800x600" (vrefresh out of range) > (II) NV(0): Not using default mode "400x300" (vrefresh out of range) > (II) NV(0): Not using default mode "1024x768" (vrefresh out of range) > (II) NV(0): Not using default mode "512x384" (vrefresh out of range) > (II) NV(0): Not using default mode "1024x768" (vrefresh out of range) > (II) NV(0): Not using default mode "512x384" (vrefresh out of range) > (II) NV(0): Not using default mode "1280x960" (hsync out of range) > (II) NV(0): Not using default mode "640x480" (hsync out of range) > (II) NV(0): Not using default mode "640x512" (hsync out of range) > (WW) (1600x1200,Dell 1901FP) mode clock 162MHz exceeds DDC maximum 140MHz > (II) NV(0): Not using default mode "1600x1200" (hsync out of range) > (II) NV(0): Not using default mode "800x600" (hsync out of range) > (II) NV(0): Not using default mode "1600x1200" (hsync out of range) > (II) NV(0): Not using default mode "800x600" (hsync out of range) > (II) NV(0): Not using default mode "1600x1200" (hsync out of range) > (II) NV(0): Not using default mode "800x600" (hsync out of range) > (II) NV(0): Not using default mode "1600x1200" (hsync out of range) > (II) NV(0): Not using default mode "800x600" (hsync out of range) > (II) NV(0): Not using default mode "1792x1344" (hsync out of range) > (II) NV(0): Not using default mode "896x672" (hsync out of range) > (II) NV(0): Not using default mode "1792x1344" (hsync out of range) > (II) NV(0): Not using default mode "896x672" (hsync out of range) > (II) NV(0): Not using default mode "1856x1392" (hsync out of range) > (II) NV(0): Not using default mode "928x696" (hsync out of range) > (II) NV(0): Not using default mode "1856x1392" (hsync out of range) > (II) NV(0): Not using default mode "928x696" (hsync out of range) > (II) NV(0): Not using default mode "1920x1440" (hsync out of range) > (II) NV(0): Not using default mode "960x720" (hsync out of range) > (II) NV(0): Not using default mode "1920x1440" (hsync out of range) > (II) NV(0): Not using default mode "960x720" (hsync out of range) > (II) NV(0): Not using default mode "1152x768" (vrefresh out of range) > (II) NV(0): Not using default mode "576x384" (vrefresh out of range) > (II) NV(0): Not using default mode "1400x1050" (hsync out of range) > (II) NV(0): Not using default mode "700x525" (hsync out of range) > (II) NV(0): Not using default mode "1920x1440" (hsync out of range) > (II) NV(0): Not using default mode "960x720" (hsync out of range) > (II) NV(0): Not using default mode "2048x1536" (hsync out of range) > (II) NV(0): Not using default mode "1024x768" (hsync out of range) > (II) NV(0): Not using default mode "2048x1536" (hsync out of range) > (II) NV(0): Not using default mode "1024x768" (hsync out of range) > (II) NV(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) > (II) NV(0): Not using default mode "1024x768" (hsync out of range) > (II) NV(0): Not using default mode "1600x1200" (width too large for virtual size) > (II) NV(0): Not using default mode "1400x1050" (width too large for virtual size) > (--) NV(0): Virtual size is 1280x1024 (pitch 1280) > (**) NV(0): *Mode "1280x1024": 137.9 MHz, 79.8 kHz, 75.0 Hz > (II) NV(0): Modeline "1280x1024" 137.89 1280 1336 1616 1728 1024 1026 1038 1064 > (**) NV(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz > (II) NV(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync > (**) NV(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz > (II) NV(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync > (**) NV(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz > (II) NV(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync-vsync > (**) NV(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz > (II) NV(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync > (**) NV(0): Mode "1152x864": 104.1 MHz, 67.8 kHz, 75.0 Hz > (II) NV(0): Modeline "1152x864" 104.14 1152 1200 1440 1536 864 866 878 904 > (**) NV(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz > (II) NV(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync > (**) NV(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz > (II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync > (**) NV(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz > (II) NV(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync > (**) NV(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz > (II) NV(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync > (**) NV(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz > (II) NV(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync > (**) NV(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D) > (II) NV(0): Modeline "800x600" 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync > (**) NV(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz > (II) NV(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync > (**) NV(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D) > (II) NV(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync > (**) NV(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D) > (II) NV(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync > (**) NV(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D) > (II) NV(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync > (**) NV(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz > (II) NV(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync > (**) NV(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz > (II) NV(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync > (**) NV(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D) > (II) NV(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync > (**) NV(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D) > (II) NV(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync > (**) NV(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D) > (II) NV(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync > (**) NV(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D) > (II) NV(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync > (**) NV(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) > (II) NV(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync > (**) NV(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D) > (II) NV(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync > (**) NV(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) > (II) NV(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync > (**) NV(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) > (II) NV(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync > (**) NV(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) > (II) NV(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync > (**) NV(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) > (II) NV(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync > (**) NV(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D) > (II) NV(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync > (**) NV(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D) > (II) NV(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync > (**) NV(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) > (II) NV(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync > (--) NV(0): Display dimensions: (380, 310) mm > (--) NV(0): DPI set to (85, 83) > > On Tue, 7 Dec 2004 18:09:38 -0800 (PST) Mark Vojkovich <mvojkovi@xxxxxxxxxxx> wrote: > > > > > The nv driver can only drive a panel in resolutions up to the > > resolution that the BIOS posts to. In the /var/log/XFree86.0.log > > file there is a line that looks like: > > > > "Panel size is" blah x blah > > > > It should work with resolutions up to that size. It will not > > work with resolutions beyond that size. > > > > > > Mark. > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 > _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
