RE: Re: [XFree86 on Solaris/X86] (EE) GLINT(1): Cannot read V_BIOS(3)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Have you tried setting your VideoRam manually in the xconfig file under the device section?  
Also try manually setting the ChipSet name. Can you attach your XFree86.0.log?

-M

________________________________________
From: ASIF IQBAL [mailto:ashuasif02@xxxxxxxxxxxxxx] 
Sent: Friday, December 03, 2004 5:53 AM
To: xfree86@xxxxxxxxxxx
Cc: Marc Aurele La France; xfree86@xxxxxxxxxxx
Subject: Re: Re:  [XFree86 on Solaris/X86] (EE) GLINT(1): Cannot read V_BIOS(3)

  

  
Hi! Marc

I have installed the aperture driver from ..xc/programs/Xserver/hw/xfree86/etc/apSolaris.shar file 
and when i again try to configure using the command "XFree86 -configure", the log file "XFree86.0.log"
still reflects the same error. ie "(EE) GLINT(1): Cannot read V_BIOS (3)".
I also tried to find in the CVS of XFree86 and unable to find. Can you please tell me the exact
location where it is addressed, and if possible give me the detailed solution for this problem.

thanking you,



On Tue, 30 Nov 2004 Marc Aurele La France wrote :
>On Tue, 30 Nov 2004, asif iqbal wrote:
>
>>I am trying to bring up my Permedia card on PCI by XFree86-4.4.0 on Solaris-8/X86.  At first I have configured XFree86 only with "SIS" card, and it worked fine.  Then while I tried to configure both SIS and Permedia cards together by the command "XFree86 -configure", the file in /var/log/XFree86.0.log have the error message showing like "(EE) GLINT(1): Cannot read V_BIOS(3)" can anybody give me the solution for this.  And for the configured file i got after the above step "XF86Config.new", and i tried to check the Xserver by the command "XFree86 -xf86config XF86Config.new" the system hanged. Please give me the solution for this.
>
>There is a possible fix for this in our CVS.  If that doesn't work, it might be that the driver for /dev/xsvc doesn't allow certain mappings, in which case you would have to switch to the XFree86-provided aperture driver.
>
>Marc.
>
>+----------------------------------+-----------------------------------+
>|  Marc Aurele La France          |  work:  1-780-492-9310          |
>|  Computing and Network Services  |  fax: ;   1-780-492-1729          |
>|  352 General Services Building  |  email:  tsi@xxxxxxxxxxx          |
>|  University of Alberta          +-----------------------------------+
>|  Edmonton, Alberta              |                                  |
>|  T6G 2H1                        |    Standard disclaimers apply    |
>|  CANADA                          |                                  |
>+----------------------------------+-----------------------------------+
>XFree86 developer and VP.  ATI driver and X server internals.
>_______________________________________________
>XFree86 mailing list
>XFree86@xxxxxxxxxxx
>http://XFree86.Org/mailman/listinfo/xfree86





_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86

[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux