|
Dear Friends, Please help me. I shall be very grateful. Thanks in advance for your time and effort. --
Linux version 2.4.20-8 (bhcompile@xxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000009800000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 152MB LOWMEM available. On node 0 totalpages: 38912 zone(0): 4096 pages. zone(1): 34816 pages. zone(2): 0 pages. Kernel command line: ro root=LABEL=/ hdd=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 551.256 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1101.00 BogoMIPS Memory: 148860k/155648k available (1347k kernel code, 5184k reserved, 999k data, 132k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU serial number disabled. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Pentium III (Katmai) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb480, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router SIS [1039/0008] at 00:01.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Starting kswapd VFS: Disk quotas vdquot_6.5.1 pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 00:00.1 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SiS620 ATA 66 controller ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:DMA spurious 8259A interrupt: IRQ15. hda: ST310212A, ATA DISK drive hdb: ST340014A, ATA DISK drive blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff) blk: queue c03ca084, I/O limit 4095Mb (mask 0xffffffff) hdd: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 20005650 sectors (10243 MB) w/512KiB Cache, CHS=1245/255/63, UDMA(66) hdb: host protected area => 1 hdb: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(66) ide-floppy driver 0.99.newide Partition check: hda: hda1 hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 > ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 83k freed VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 132k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xca029000, IRQ 9 usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] 7001 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 5 for device 00:0b.0 PCI: Sharing IRQ 5 with 00:0f.0 usb-ohci.c: USB OHCI at membase 0xca02b000, IRQ 5 usb-ohci.c: usb-00:0b.0, OPTi Inc. 82C861 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx> hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice hub.c: new USB device 00:0b.0-2, assigned address 2 usb.c: USB device 2 (vend/prod 0xac8/0x301b) is not claimed by any active driver. Adding Swap: 1020088k swap-space (priority -1) SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HL-DT-ST Model: CD-RW GCE-8481B Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 IA-32 Microcode Update Driver: v1.11 <tigran@xxxxxxxxxxx> microcode: CPU0 already at revision 14 (current=14) microcode: freed 2048 bytes parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 40x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 ip_tables: (C) 2000-2002 Netfilter core team fealnx.c:v2.51 Nov-17-2001 PCI: Found IRQ 10 for device 00:09.0 divert: allocating divert_blk for eth0 eth0: 100/10M Ethernet PCI Adapter at 0xe000, 00:e0:50:01:1d:fa, IRQ 10. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). lp0: console ready |
