As requested, I have attached the output of lspci and the two other files. Best Regards, L. > > From: Ryan Underwood <nemesis-lists@xxxxxxxxxxxx> > Date: 2004/10/22 Fri PM 01:50:15 EST > To: xfree86@xxxxxxxxxxx > Subject: Re: Re: Cirrus 7543 Chipset Issue > > On Fri, Oct 22, 2004 at 10:33:13AM -0400, RedShift wrote: > > Thank-you for your recent guidance on solving this problem. I have made the change and re-booted the system. Unfortunately it did not solve the problem. > > > > I have attached both the configuration file and log file to this e-mail. > > can you attach lspci -vvv output? > > -- > Ryan Underwood, <nemesis@xxxxxxxxxxxx> > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 >
# XFree86 4 configuration created by pyxf86config Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "DevInputMice" "AlwaysCore" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" Load "dri" EndSection Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions" "ctrl:nocaps" # Identifier "Keyboard0" Driver "keyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection Section "InputDevice" # If the normal CorePointer mouse is not a USB mouse then # this input device can be used in AlwaysCore mode to let you # also use USB mice at the same time. Identifier "DevInputMice" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "0" HorizSync 31.5 - 37.9 VertRefresh 40.0 - 70.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "cirrus" VendorName "Videocard vendor" BoardName "Cirrus Logic GD754x (laptop)" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Depth 16 Modes "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection
Attachment:
XFree86.0.log
Description: Binary data
00:00.0 Host bridge: OPTi Inc. 82C557 [Viper-M] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:01.0 ISA bridge: OPTi Inc. 82C558 [Viper-M ISA+IDE] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0 00:02.0 VGA compatible controller: Cirrus Logic GD 7543 [Viking] (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 0 Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c1000000 (32-bit, non-prefetchable) [size=16M]
