On Mon, Oct 04, 2004 at 01:06:20PM +0530, Jagdish R.Chhailkar wrote: > For the ready reference I am enclosing the complete log file > (i.e. XFree86.0.log) from /var/log and the output of the "lspci -v" > command. After looking at your configuration file I had another look at the logfile. There's really not that much that I can think of that is causing this, but I did notice a few points: > (II) I810(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21 Is your monitor really 28x21 cm? If it isn't, try setting it in the Monitor section of your configuration file with the DisplaySize 400 300 command. The first number is the horizontal size, the second number the vertical size, both in mm. > (II) I810(0): Manufacturer's mask: 0 It appears that there are no modes supported by the VESA settings that are also available according to the monitor. Can you turn off the automatic settings gathering from your monitor? As an alternative you could try creating your own modeline for 1024x768, since both your monitor and the chipset should have no problem with this resolution. Regards, Pieter Hulshoff _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
