On Sun, 15 Aug 2004 12:15:12 -0700 (PDT) Mark Vojkovich <mvojkovi@xxxxxxxxxxx> wrote: > Is that the console or the log file? Errors are in > /var/log/XFree86.0.log. Its the log file. Julius. > > Mark. > > On Sun, 15 Aug 2004, julius wrote: > > > Hi, > > > > im confused, why isnt x starting? > > > > Section "ServerLayout" > > Identifier "XFree86 Configured" > > Screen 0 "Screen0" 0 0 > > InputDevice "Keyboard0" "CoreKeyboard" > > InputDevice "PS/2 Mouse" "CorePointer" > > # Serial Mouse not detected > > InputDevice "USB Mouse" "CorePointer" > > EndSection > > > > Section "ServerFlags" > > Option "AllowMouseOpenFail" "true" > > > > EndSection > > > > Section "Files" > > RgbPath "/usr/X11R6/lib/X11/rgb" > > ModulePath "/usr/X11R6/lib/modules" > > FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" > > FontPath "/usr/X11R6/lib/X11/fonts/misc" > > FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" > > FontPath "/usr/X11R6/lib/X11/fonts/75dpi" > > FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" > > FontPath "/usr/X11R6/lib/X11/fonts/100dpi" > > FontPath "/usr/X11R6/lib/X11/fonts/Speedo" > > FontPath "/usr/X11R6/lib/X11/fonts/PEX" > > # Additional fonts: Locale, Gimp, TTF... > > FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" > > # FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi" > > # FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi" > > # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! > > FontPath "/usr/X11R6/lib/X11/fonts/Type1" > > FontPath "/usr/share/fonts/ttf/western" > > FontPath "/usr/share/fonts/ttf/decoratives" > > FontPath "/usr/share/fonts/truetype" > > FontPath "/usr/share/fonts/truetype/openoffice" > > FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" > > FontPath "/usr/share/fonts/latex-ttf-fonts" > > FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID" > > FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType" > > EndSection > > > > Section "Module" > > Load "ddc" # ddc probing of monitor > > # Load "GLcore" > > # Load "dbe" > > # Load "dri" > > # Load "drm" > > # Load "extmod" > > # Load "glx" > > # Load "bitmap" # bitmap-fonts > > # Load "speedo" > > # Load "type1" > > # Load "freetype" > > # Load "record" > > EndSection > > > > Section "InputDevice" > > Identifier "Keyboard0" > > Driver "keyboard" > > Option "CoreKeyboard" > > Option "XkbRules" "xfree86" > > Option "XkbModel" "pc105" > > Option "XkbLayout" "de" > > Option "XkbVariant" "nodeadkeys" > > EndSection > > > > Section "InputDevice" > > Identifier "PS/2 Mouse" > > Driver "mouse" > > Option "Protocol" "auto" > > Option "ZAxisMapping" "4 5" > > Option "Device" "/dev/psaux" > > Option "Emulate3Buttons" "true" > > Option "Emulate3Timeout" "70" > > Option "SendCoreEvents" "true" > > EndSection > > > > Section "InputDevice" > > Identifier "USB Mouse" > > Driver "mouse" > > Option "Device" "/dev/input/mice" > > Option "SendCoreEvents" "true" > > Option "Protocol" "IMPS/2" > > Option "ZAxisMapping" "4 5" > > Option "Buttons" "5" > > Option "Samplerate" "150" > > # Option "Resolution" "200" > > EndSection > > > > # Auto-generated by KNOPPIX mkxf86config > > > > Section "Monitor" > > Identifier "Monitor0" > > Option "DPMS" "true" > > # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors > > HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors > > VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default. > > Endsection > > > > Section "Device" > > ### Available Driver options are:- > > # sw_cursor is needed for some ati and radeon cards > > #Option "sw_cursor" > > #Option "hw_cursor" > > #Option "NoAccel" > > #Option "ShowCache" > > #Option "ShadowFB" > > #Option "UseFBDev" > > #Option "Rotate" > > Identifier "Card0" > > # The following line is auto-generated by KNOPPIX mkxf86config > > Driver "vesa" > > VendorName "All" > > BoardName "All" > > # BusID "PCI:1:0:0" > > EndSection > > > > Section "Screen" > > Identifier "Screen0" > > Device "Card0" > > Monitor "Monitor0" > > DefaultColorDepth 16 > > SubSection "Display" > > Depth 16 > > Modes "1024x768" "800x600" "640x480" > > EndSubSection > > EndSection > > > > > > > > log: > > _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 > > _XSERVTransOpen: transport open failed for inet6/metalfan:0 > > _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 > > > > XFree86 Version 4.4.0 > > Release Date: 29 February 2004 > > X Protocol Version 11, Revision 0, Release 6.6 > > Build Operating System: Linux 2.6.7 i686 [ELF] > > Current Operating System: Linux metalfan 2.6.7 #1 Wed Aug 11 06:40:09 UTC 2004 i686 > > Build Date: 15 August 2004 > > Changelog Date: 29 February 2004 > > Before reporting problems, check http://www.XFree86.Org/ > > to make sure that you have the latest version. > > Module Loader present > > Markers: (--) probed, (**) from config file, (==) default setting, > > (++) from command line, (!!) notice, (II) informational, > > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > > (==) Log file: "/var/log/XFree86.0.log", Time: Sun Aug 15 12:41:33 2004 > > (==) Using config file: "/etc/X11/XF86Config" > > > > waiting for X server to shut down > > > > > > I dont see any error messages ??? > > > > Regards > > Julius > > > > _______________________________________________ > > XFree86 mailing list > > XFree86@xxxxxxxxxxx > > http://XFree86.Org/mailman/listinfo/xfree86 > > > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 > _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
