Is that the console or the log file? Errors are in /var/log/XFree86.0.log. Mark. On Sun, 15 Aug 2004, julius wrote: > Hi, > > im confused, why isnt x starting? > > Section "ServerLayout" > Identifier "XFree86 Configured" > Screen 0 "Screen0" 0 0 > InputDevice "Keyboard0" "CoreKeyboard" > InputDevice "PS/2 Mouse" "CorePointer" > # Serial Mouse not detected > InputDevice "USB Mouse" "CorePointer" > EndSection > > Section "ServerFlags" > Option "AllowMouseOpenFail" "true" > > EndSection > > Section "Files" > RgbPath "/usr/X11R6/lib/X11/rgb" > ModulePath "/usr/X11R6/lib/modules" > FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/misc" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi" > FontPath "/usr/X11R6/lib/X11/fonts/Speedo" > FontPath "/usr/X11R6/lib/X11/fonts/PEX" > # Additional fonts: Locale, Gimp, TTF... > FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" > # FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi" > # FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi" > # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! > FontPath "/usr/X11R6/lib/X11/fonts/Type1" > FontPath "/usr/share/fonts/ttf/western" > FontPath "/usr/share/fonts/ttf/decoratives" > FontPath "/usr/share/fonts/truetype" > FontPath "/usr/share/fonts/truetype/openoffice" > FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" > FontPath "/usr/share/fonts/latex-ttf-fonts" > FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID" > FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType" > EndSection > > Section "Module" > Load "ddc" # ddc probing of monitor > # Load "GLcore" > # Load "dbe" > # Load "dri" > # Load "drm" > # Load "extmod" > # Load "glx" > # Load "bitmap" # bitmap-fonts > # Load "speedo" > # Load "type1" > # Load "freetype" > # Load "record" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc105" > Option "XkbLayout" "de" > Option "XkbVariant" "nodeadkeys" > EndSection > > Section "InputDevice" > Identifier "PS/2 Mouse" > Driver "mouse" > Option "Protocol" "auto" > Option "ZAxisMapping" "4 5" > Option "Device" "/dev/psaux" > Option "Emulate3Buttons" "true" > Option "Emulate3Timeout" "70" > Option "SendCoreEvents" "true" > EndSection > > Section "InputDevice" > Identifier "USB Mouse" > Driver "mouse" > Option "Device" "/dev/input/mice" > Option "SendCoreEvents" "true" > Option "Protocol" "IMPS/2" > Option "ZAxisMapping" "4 5" > Option "Buttons" "5" > Option "Samplerate" "150" > # Option "Resolution" "200" > EndSection > > # Auto-generated by KNOPPIX mkxf86config > > Section "Monitor" > Identifier "Monitor0" > Option "DPMS" "true" > # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors > HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors > VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default. > Endsection > > Section "Device" > ### Available Driver options are:- > # sw_cursor is needed for some ati and radeon cards > #Option "sw_cursor" > #Option "hw_cursor" > #Option "NoAccel" > #Option "ShowCache" > #Option "ShadowFB" > #Option "UseFBDev" > #Option "Rotate" > Identifier "Card0" > # The following line is auto-generated by KNOPPIX mkxf86config > Driver "vesa" > VendorName "All" > BoardName "All" > # BusID "PCI:1:0:0" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > DefaultColorDepth 16 > SubSection "Display" > Depth 16 > Modes "1024x768" "800x600" "640x480" > EndSubSection > EndSection > > > > log: > _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 > _XSERVTransOpen: transport open failed for inet6/metalfan:0 > _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 > > XFree86 Version 4.4.0 > Release Date: 29 February 2004 > X Protocol Version 11, Revision 0, Release 6.6 > Build Operating System: Linux 2.6.7 i686 [ELF] > Current Operating System: Linux metalfan 2.6.7 #1 Wed Aug 11 06:40:09 UTC 2004 i686 > Build Date: 15 August 2004 > Changelog Date: 29 February 2004 > Before reporting problems, check http://www.XFree86.Org/ > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Sun Aug 15 12:41:33 2004 > (==) Using config file: "/etc/X11/XF86Config" > > waiting for X server to shut down > > > I dont see any error messages ??? > > Regards > Julius > > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 > _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
