After install Xfree86 I type # XFree86 - configure XFree86: not found # I have to change the path? Thanks... -----Original Message----- From: xfree86-admin@xxxxxxxxxxx [mailto:xfree86-admin@xxxxxxxxxxx] On Behalf Of Mark Vojkovich Sent: Viernes, 30 de Julio de 2004 08:55 p.m. To: xfree86@xxxxxxxxxxx Subject: Re: Problem to configure Dsiplay in solaris 9 x86 On Fri, 30 Jul 2004, Rodolfo Sotelo C. wrote: > Hi all. > > > > I'm newbie, so I hope somebody can help me. > > > > I just installed Solaris 9 in a Dell M60 Laptop, because I was unable to > find my video card o the list, the only that get through the test was the > vga with 16 colors, I choose that, and continued with the installation. > > > > After that I've installed the XFree86 4.4.0. but I don't know what's > next.I've try to run kdmconfig but a message saying that window is too small > (80x21) minimum of 80x24 is required. > > > > I also ran the XFree86 -config command and , not found error message. What error? I think "XFree86 -configure" should work. All the GeForce/Quadro FX cards should be supported in 4.4.0, though there might be some problems restoring the console correctly after quiting on some laptops. I think those are fixed in CVS though, and your laptop might not be effected. Mark. > > > > I just need some basic instructions to get this working my video card is a > Nvidia Quadro FX 700 64MB > > > > I'm starting from scratch so the only that is installed is the Solaris 9 and > the XFree86 4.4.0.. > > > > > > Thank you very much in advance. > > > > R.SOTELO > > _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86 _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
