Fatal server error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Error "fatal server error" running XFree86 3.3.6 on my Debian 3.0 using a
Cirrus Logic card with 800x600x256 mode.

If i run whith 640x480x256 configuration mode all work fine.


Extract of XF86config:

ection "Device"
    Identifier  "Cirrus"
    VendorName  "CirrusLogic"
    BoardName   "GD5420"
    #VideoRam    512
# Device section for Cirrus Logic GD5420/2/4/6/8/9-based cards.
    #MemBase 0x00e00000
    #MemBase 0x04e00000
    #Option "linear"
# Use Option "no_bitblt" if you have graphics problems. If that fails
# try Option "noaccel".
# Refer to /usr/X11R6/lib/doc/README.cirrus.
# To allow linear addressing, uncomment the Option line and the
# address that the card maps the framebuffer to.
#    Clocks  25.23  28.32   0.00   0.00  31.50
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# The Colour SVGA server

Section "Screen"
    Driver      "svga"
    # Use Device "Generic VGA" for Standard VGA 320x200x256
    #Device      "Generic VGA"
    Device      "Cirrus"
    Monitor     "Compaq"
    Subsection "Display"
        Depth       8
        # Omit the Modes line for the "Generic VGA" device
        Modes       "800x600" (IF I PUT HERE 640X480 THE XSERVER RUN WELL)
        ViewPort    0 0
        # Use Virtual 320 200 for Generic VGA
    EndSubsection


XSERVER LOG	:

X: unable to open wrapper config file /etc/X11/Xwrapper.config

XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: xx November 2000
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.13 i686 [ELF] 
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 1):
(using VT number 7)

XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us_intl)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3
(**) SVGA: Graphics device ID: "Cirrus"
(**) SVGA: Monitor ID: "Compaq"
(--) SVGA: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:un
scaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Spe
edo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11
R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/"
(--) SVGA: chipset:  clgd5420
(--) SVGA: videoram: 512k
(--) SVGA: clocks:  25.23  28.32   0.00   0.00  31.50
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 34.167 MHz
(--) SVGA: There is no defined dot-clock matching mode "800x600"

Fatal server error:
No valid modes found.

Could help me anyone??
RGDS
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86

[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux