Hey there, people. I'm from Brazil, and have not very time using linux.
I needed to re-install my Slackware Linux 9.0 and since I did it, XFree86 didn't work. It apears the "No screens found" error, and there is a Screen section in /etc/X11/XF86Config, using the VESA device and the correct horiz and vert ranges 30 - 86 and 50 - 160. These numbers are correct for 107 T philips monitor.
I need some help, please.
Thanks,
Lourenzo
_________________________________________________________________ MSN Hotmail, o maior webmail do Brasil. http://www.hotmail.com
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# NOTE: This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver. Thanks to Kenneth Fanyo who pointed
# this out to me. :)
# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).
# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! :)
# -- volkerdi@xxxxxxxxxxxxx
#
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# Some examples of extended input devices
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". Identifier "Simple Layout" Screen "Screen 1" 0 0 InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # # ModulePath can be used to set a search path for the X server modules. # The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/" EndSection
Section "Module"
# This loads the DBE extension module. # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. # This loads the font modules Load "dbe" # Double buffer extension SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection Load "type1" Load "freetype" Load "speedo" # This loads the GLX module Load "glx" EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" # Set the keyboard auto repeat parameters. Not all platforms implement # this. # Option "AutoRepeat" "500 5" # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)). # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a European # keyboard, you will probably want to use one of: # # Option "XkbModel" "pc102" # Option "XkbModel" "pc105" # # If you have a Microsoft Natural keyboard, you can use: # # Option "XkbModel" "microsoft" # # If you have a US "windows" keyboard you will want: # # Option "XkbModel" "pc104" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # # Option "XkbLayout" "de" # # or: # # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # # Option "XkbRules" "xfree86" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" Identifier "Keyboard1" Driver "Keyboard" Option "XkbRules" "xfree86" Option "XkbModel" "abnt2" Option "XkbLayout" "br" EndSection
Section "InputDevice"
# Identifier and driver # On platforms where PnP mouse detection is supported the following # protocol setting can be used when using a newer PnP mouse: # Option "Protocol" "Auto" # The available mouse protocols types that you can set below are: # Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2 # Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2 # MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse # ThinkingMouse ThinkingMousePS/2 Xqueue # which is usually a symbolic link to the real device. # Option "Device" "/dev/ttyS0" # Option "Device" "/dev/ttyS1" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" Identifier "Mouse1" Driver "mouse" Option "Protocol" "PS/2" # The mouse device. The device is normally set to /dev/mouse, Option "Device" "/dev/mouse" # Option "Device" "/dev/psaux" EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 30-70
VertRefresh 50-160
vendorname "Philips"
modelname "107S"
ModeLine "1280x1024/76Hz" 135 1280 1312 1416 1664 1024 1027 1030 1064
ModeLine "1024x768/85Hz" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
ModeLine "1280x1024/74Hz" 135 1280 1312 1456 1712 1024 1027 1030 1064
ModeLine "1280x1024/61Hz" 110 1280 1328 1512 1712 1024 1025 1028 1054
EndSection
Section "Device"
#VideoRam 4096 # Insert Clocks lines here if appropriate Identifier "VESA Framebuffer" Driver "vesa" vendorname "Generic" boardname "vesa" EndSection
Section "Screen"
# If your card can handle it, a higher default color depth (like 24 or 32) # is highly recommended. # DefaultDepth 8 # DefaultDepth 16 # DefaultDepth 32 # "1024x768" is also a conservative usable default resolution. If you # have a better monitor, feel free to try resolutions such as # "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your # card/monitor can produce) Identifier "Screen 1" Device "VESA Framebuffer" Monitor "My Monitor" DefaultDepth 24 SubSection "Display" Depth 8 Modes "1280x1024/61Hz" "800x600" "640x480" #Virtual 1800 1440 #Virtual 1800 1440 EndSubSection SubSection "Display" Depth 16 Modes "1280x1024/61Hz" "800x600" "640x480"
#Virtual 1600 1200 #Virtual 1800 1440 EndSubSection SubSection "Display" Depth 24 Modes "1280x1024/61Hz" "800x600" "640x480" #Virtual 1800 1440 #Virtual 1800 1440 #Virtual 1800 1440 EndSubSection SubSection "Display" Depth 32 Modes "1280x1024/61Hz" "800x600" "640x480" #Virtual 1800 1440 #Virtual 1800 1440 #Virtual 1800 1440 EndSubSection EndSection
Section "InputDevice"
Identifier "Keyboard"
Option "XkbModel" "pc104" Option "XkbLayout" "us" Driver "keyboard" EndSection
Section "InputDevice"
Identifier "Mouse"
Option "Protocol" "" Option "Device" "/dev/mouse" Driver "mouse" Option "Emulate3Buttons" Option "ZAxisMapping" "4 5" EndSection
Section "ServerFlags"
EndSection
Attachment:
XFree86.0.log
Description: Binary data
