I've only done this with Linux, not Solaris. Both the BusID values have
to be the same (which makes sense, you only have one card, right?) Everything else looks okay.
Thanks Guy,
Unfortunately naming both of the cards to 1:0:0 results in a server crash with resourse conflict (see below). I understood it so that the primary and secondary displays of 9600 (unlike some older Radeons) show as two devices. Did I understand correctly? The server totally crashes with both devices set at 1:0:0 whereas the machine is usable (although one one screen only) with different PCI locations.
reland Ltd.(--) PCI:*(1:0:0) ATI Technologies Inc RV350 AP [Radeon 9600] rev 0,
Mem @ 0xe00
00000/28, 0xfd600000/16, I/O @ 0xa000/8, BIOS @ 0xfd500000/17
(--) PCI: (1:0:1) ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) rev 0,
Mem @ 0xd0000000/28, 0xfd400000/16
The crash resulting with setting both cards to 1:0:0 is:
======================================
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Silken mouse disabled
(II) RADEON(0): Using hardware cursor (scanline 1202)
(II) RADEON(0): Largest offscreen area available: 1600 x 6986*** If unresolved symbols were reported above, they might not *** be the reason for the server aborting.
Fatal server error: Caught signal 11. Server aborting
When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to xfree86@xxxxxxxxxxxx
(II) Screen 0 shares mem & io resources (II) Screen 1 shares mem & io resources (II) RADEON(0): Wrote: rd=12, fd=101, pd=3 ======================================
With 1:0:0 for primary and 1:0:1 for secondary devices in XF86Config I get this "No matching Device" and but the server starts okay on one head:
====================================== (II) Primary Device is: PCI 01:00:0 > (II) ATI: Candidate "Device" section "PriAti". > (II) ATI: Candidate "Device" section "SecAti". > (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) > found(--) Chipset ATI Radeon 9600 AP (AGP) found > (II) resource ranges after xf86ClaimFixedResources() call ======================================
I have had a feeling that it almost works but not quite for quite a few days now. I would be so happy if I got this machine to work dualheaded.
_______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
