Can you try adding this to your Device Section. Option "swcursor" Does that help ?? Alan. On Tue, May 04, 2004 at 10:31:48PM -0400, Michael Tuchman wrote: > Although I noticed a comment in the changelog saying that the glint > driver had fixed a problem with color inversion and screen blanking, I > am still experiencing this problem (although it takes a good deal longer > wait time until failure (15 minutes vs. 5 previously). > > Also, I have been searching through google for this issue over the past > month. While it is possible that I overlooked something, I have made a > good faith effort to keep abreast of this issue. Nonetheless, having > exhausted my resources, I now come to this list for help. > > While I do try to solve my own problems to the best of my ability, in > this case I am "flying blind" by using an old computer for which we are > still seeking the original documentation. > Below I have enclosed relevant files requested on the XFree86 Website. > I am also running FREEBSD-CURRENT 5.2 (the uname -a output is at the > bottom of this message). > > One option I have is to return to the 3.3.4 driver. I had heard this > was OK. Any thoughts? > > Here is my XF86Config > ---------------------- Begin XF86Config --------------------------- > > Section "Module" > Load "dbe" # Double buffer extension > SubSection "extmod" > Option "omit xfree86-dga" # don't initialise the DGA extension > EndSubSection > Load "type1" > Load "speedo" > EndSection > Section "Files" > RgbPath "/usr/X11R6/lib/X11/rgb" > FontPath "/usr/X11R6/lib/X11/fonts/local/" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > EndSection > Section "ServerFlags" > EndSection > Section "InputDevice" > Identifier "Keyboard1" > Driver "Keyboard" > Option "AutoRepeat" "500 30" > Option "XkbRules" "xfree86" > Option "XkbModel" "hpi6" > Option "XkbLayout" "us" > Option "XkbOptions" "caps:internal,altwin:meta_alt" > EndSection > Section "InputDevice" > Identifier "Mouse1" > Driver "mouse" > Option "Protocol" "Auto" > Option "Device" "/dev/sysmouse" > Option "Emulate3Buttons" > EndSection > Section "Monitor" > Identifier "Dell HTX1025 Ultrascan" > HorizSync 30-70 > VertRefresh 48-150 > # Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 > +hsync +vsync > > EndSection > Section "Device" > Identifier "ELSA" Driver "glint" > BusID "PCI:1:10:1" > VideoRam 32768 > # RamDac 250 > # Option "XaaNoScanlineCPUToScreenColorExpandFill" > # Option "UseFBDev" "On" > EndSection > Section "Screen" > Identifier "Screen 1" > Device "ELSA" > Monitor "Dell HTX1025 Ultrascan" > DefaultDepth 24 > Subsection "Display" > Depth 24 > Modes "1024x768" ViewPort 0 0 > EndSubsection > EndSection > Section "ServerLayout" > Identifier "Simple Layout" > Screen "Screen 1" > InputDevice "Mouse1" "CorePointer" > InputDevice "Keyboard1" "CoreKeyboard" > EndSection > > ------------------------------End of XF86Config > ------------------------------- > > ------------------------------Beginning of /var/log/Xfree86.log.0 --------- > > XFree86 Version 4.4.0 > Release Date: 29 February 2004 > X Protocol Version 11, Revision 0, Release 6.6 > Build Operating System: FreeBSD 5.1-RELEASE i386 [ELF] Current Operating > System: FreeBSD saudran.vzavenue.net 5.2-RELEASE FreeBSD 5.2-RELEASE #0: > Sun Jan 11 04:21:45 GMT 2004 > root@xxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC i386 > Build Date: 27 February 2004 > Changelog Date: 29 February 2004 > Before reporting problems, check http://www.XFree86.Org/ > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Tue May 4 20:50:50 2004 > (==) Using config file: "/etc/X11/XF86Config" > (==) ServerLayout "Simple Layout" > (**) |-->Screen "Screen 1" (0) > (**) | |-->Monitor "Dell HTX1025 Ultrascan" > (**) | |-->Device "ELSA" > (**) |-->Input Device "Mouse1" > (**) |-->Input Device "Keyboard1" > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "hpi6" > (**) XKB: model: "hpi6" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (**) Option "XkbOptions" "caps:internal,altwin:meta_alt" > (**) XKB: options: "caps:internal,altwin:meta_alt" > (==) Keyboard: CustomKeycode disabled > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.2 > XFree86 Video Driver: 0.7 > XFree86 XInput driver : 0.4 > XFree86 Server Extension : 0.2 > XFree86 Font Renderer : 0.4 > (II) Loader running on freebsd > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.7 > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 9 > > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,1237 card 0000,0000 rev 02 class 06,00,00 > hdr 00 > (II) PCI: 00:0d:0: chip 8086,7000 card 0000,0000 rev 01 class 06,01,00 > hdr 80 > (II) PCI: 00:0d:1: chip 8086,7010 card 0000,0000 rev 00 class 01,01,80 > hdr 00 > (II) PCI: 00:0d:2: chip 8086,7020 card 0000,0000 rev 01 class 0c,03,00 > hdr 00 > (II) PCI: 00:0e:0: chip 1011,0024 card 0000,0000 rev 02 class 06,04,00 > hdr 01 > (II) PCI: 00:10:0: chip 9004,8178 card 0000,0000 rev 00 class 01,00,00 > hdr 00 > (II) PCI: 01:08:0: chip 10b7,9050 card 0000,0000 rev 00 class 02,00,00 > hdr 00 > (II) PCI: 01:0a:0: chip 1048,8901 card 1048,0935 rev 16 class 03,00,00 > hdr 80 > (II) PCI: 01:0a:1: chip 3d3d,0003 card 0000,0000 rev 01 class 0b,40,00 > hdr 80 > (II) PCI: 01:0a:2: chip 3d3d,0006 card 0000,0000 rev 01 class 03,80,00 > hdr 80 > (II) PCI: End of PCI scan > (II) Host-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) PCI-to-ISA bridge: > (II) Bus -1: bridge is at (0:13:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is > set) > (II) PCI-to-PCI bridge: > (II) Bus 1: bridge is at (0:14:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set) > (II) Bus 1 I/O range: > [0] -1 0 0x0000f000 - 0x0000ffff (0x1000) IX[B] > (II) Bus 1 non-prefetchable memory range: > [0] -1 0 0xf0000000 - 0xfbffffff (0xc000000) MX[B] > (II) Bus 1 prefetchable memory range: > [0] -1 0 0xef000000 - 0xefffffff (0x1000000) MX[B] > (--) PCI:*(1:10:0) unknown vendor (0x1048) unknown chipset (0x8901) rev > 22, Mem @ 0xf4000000/26, BIOS @ 0x80000000/16 > (--) PCI: (1:10:1) 3DLabs GLINT Delta rev 1, Mem @ 0xfafe0000/17 > (--) PCI: (1:10:2) 3DLabs GLINT MX rev 1, Mem @ 0xfafc0000/17, > 0xf8000000/25, 0xf2000000/25, 0xf0000000/25, BIOS @ 0xfb000000/16 > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Active PCI resource ranges: > [0] -1 0 0xfb000000 - 0xfb00ffff (0x10000) MX[B](B) > [1] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B](B) > [2] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B) > [3] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B) > [4] -1 0 0xfafc0000 - 0xfafdffff (0x20000) MX[B](B) > [5] -1 0 0xfafe0000 - 0xfaffffff (0x20000) MX[B]E > [6] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B) > [7] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) > [8] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E > [9] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]E > [10] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]E > [11] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > (II) Inactive PCI resource ranges: > [0] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]E > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xfb000000 - 0xfb00ffff (0x10000) MX[B](B) > [1] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B](B) > [2] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B) > [3] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B) > [4] -1 0 0xfafc0000 - 0xfafdffff (0x20000) MX[B](B) > [5] -1 0 0xfafe0000 - 0xfaffffff (0x20000) MX[B]E > [6] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B) > [7] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) > [8] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E > [9] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]E > [10] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]E > [11] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > (II) Inactive PCI resource ranges after removing overlaps: > [0] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]E > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfb000000 - 0xfb00ffff (0x10000) MX[B](B) > [6] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B](B) > [7] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B) > [8] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B) > [9] -1 0 0xfafc0000 - 0xfafdffff (0x20000) MX[B](B) > [10] -1 0 0xfafe0000 - 0xfaffffff (0x20000) MX[B]E > [11] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B) > [12] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) > [13] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]E > [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [16] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E > [17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]E > [18] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]E > [19] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.2 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "speedo" > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a > (II) Module speedo: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Speedo > (II) LoadModule: "glint" > (II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o > (II) Module glint: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.7 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.4 > (II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4, > pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta > (II) Primary Device is: PCI 01:0a:0 > (WW) GLINT: No matching Device section for instance (BusID PCI:1:10:2) > found > (--) Chipset delta found > (II) resource ranges after probing: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfb000000 - 0xfb00ffff (0x10000) MX[B](B) > [6] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B](B) > [7] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B) > [8] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B) > [9] -1 0 0xfafc0000 - 0xfafdffff (0x20000) MX[B](B) > [10] -1 0 0xfafe0000 - 0xfaffffff (0x20000) MX[B](B) > [11] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B) > [12] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) > [13] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]E > [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [16] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E > [17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]E > [18] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]E > [19] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > (**) GLINT(0): Depth 24, (--) framebuffer bpp 32 > (==) GLINT(0): RGB weight 888 > (==) GLINT(0): Default visual is TrueColor > (==) GLINT(0): Using gamma correction (1.0, 1.0, 1.0) > (==) GLINT(0): Using HW cursor > (--) GLINT(0): Not using Linux framebuffer device > (--) GLINT(0): Chipset: "delta" > (--) GLINT(0): FrameBuffer used from first rasterizer chip at 0xf2000000 > (--) GLINT(0): MMIO registers at 0xFAFE0000 > (==) GLINT(0): Write-combining range (0xfafe0000,0x20000) was already clear > (--) GLINT(0): Delta Bug - Changing MMIO registers to 0xF0000000 > (**) GLINT(0): VideoRAM: 32768 kByte > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.7 > (==) GLINT(0): Write-combining range (0xf0000000,0x20000) was already clear > (==) GLINT(0): Write-combining range (0xf2000000,0x2000000) > (--) GLINT(0): Cannot determine TI RAMDAC type, aborting > (==) GLINT(0): Write-combining range (0xf0000000,0x20000) was already clear > (==) GLINT(0): Write-combining range (0xf2000000,0x2000000) > (--) GLINT(0): Attached RAMDAC is IBM 640 > (--) GLINT(0): FIFO Size is 15 DWORDS > (==) GLINT(0): Min pixel clock is 16 MHz > (**) GLINT(0): Max pixel clock is 220 MHz > (II) GLINT(0): Dell HTX1025 Ultrascan: Using hsync range of 30.00-70.00 kHz > (II) GLINT(0): Dell HTX1025 Ultrascan: Using vrefresh range of > 48.00-150.00 Hz > (II) GLINT(0): Clock range: 16.25 to 220.00 MHz > (II) GLINT(0): Not using default mode "320x175" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "360x200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "576x432" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x480" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1280x960" (hsync out of range) > (II) GLINT(0): Not using default mode "640x480" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1280x1024" (hsync out of range) > (II) GLINT(0): Not using default mode "640x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1280x1024" (hsync out of range) > (II) GLINT(0): Not using default mode "640x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (hsync out of range) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (hsync out of range) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (hsync out of range) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (hsync out of range) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1792x1344" (hsync out of range) > (II) GLINT(0): Not using default mode "896x672" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1792x1344" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "896x672" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1856x1392" (hsync out of range) > (II) GLINT(0): Not using default mode "928x696" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1856x1392" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "928x696" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "416x312" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "576x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "700x525" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1400x1050" (hsync out of range) > (II) GLINT(0): Not using default mode "700x525" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1920x1440" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "2048x1536" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1400x1050" (width too large for > virtual size) > (II) GLINT(0): Not using default mode "1280x1024" (width too large for > virtual size) > (II) GLINT(0): Not using default mode "1280x960" (width too large for > virtual size) > (II) GLINT(0): Not using default mode "1152x864" (width too large for > virtual size) > (II) GLINT(0): Not using default mode "1152x768" (width too large for > virtual size) > (WW) GLINT(0): This GLINT chip only supports one modeline, using first > (--) GLINT(0): Virtual size is 1024x768 (pitch 1024) > (**) GLINT(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz > (II) GLINT(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 > 772 808 +hsync +vsync > (==) GLINT(0): DPI set to (75, 75) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.2 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.1.0 > ABI class: XFree86 Video Driver, version 0.7 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.4.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.7 > (--) Depth 24 pixmap format is 32 bpp > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 2 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B] > [1] 2 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B] > [2] 2 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B] > [3] 2 0 0xfafc0000 - 0xfafdffff (0x20000) MX[B] > [4] 1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B] > [5] 0 0 0xfafe0000 - 0xfaffffff (0x20000) MX[B] > [6] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [7] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [8] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [9] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [10] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [11] -1 0 0xfb000000 - 0xfb00ffff (0x10000) MX[B](B) > [12] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B](B) > [13] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B](B) > [14] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B](B) > [15] -1 0 0xfafc0000 - 0xfafdffff (0x20000) MX[B](B) > [16] -1 0 0xfafe0000 - 0xfaffffff (0x20000) MX[B](B) > [17] -1 0 0x80000000 - 0x8000ffff (0x10000) MX[B](B) > [18] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[B](B) > [19] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]E > [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [22] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E > [23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]E > [24] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B]E > [25] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > (==) GLINT(0): Write-combining range (0xf0000000,0x20000) was already clear > (==) GLINT(0): Write-combining range (0xf2000000,0x2000000) > (**) GLINT(0): Option "XaaNoScanlineCPUToScreenColorExpandFill" > (II) GLINT(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > Solid Lines > Offscreen Pixmaps > Driver provided WriteBitmap replacement > Driver provided WritePixmap replacement > Setting up tile and stipple cache: > 32 128x128 slots > 18 256x256 slots > 6 512x512 slots > (==) GLINT(0): Backing store disabled > (==) GLINT(0): Silken mouse enabled > (==) RandR enabled > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension LBX > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (**) Option "Protocol" "Auto" > (**) Mouse1: Device: "/dev/sysmouse" > (**) Mouse1: Protocol: "Auto" > (**) Option "CorePointer" > (**) Mouse1: Core Pointer > (**) Option "Device" "/dev/sysmouse" > (**) Option "Emulate3Buttons" > (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50 > (==) Mouse1: Buttons: 3 > (II) Keyboard "Keyboard1" handled by legacy driver > (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) > (II) Mouse1: SetupAuto: hw.iftype is 4, hw.model is 0 > (II) Mouse1: SetupAuto: protocol is SysMouse > Could not init font path element /usr/X11R6/lib/X11/fonts/local/, > removing from list! > > > ------------------------------End of Xfree86.log.0 > Operating system: > FreeBSD saudran.vzavenue.net 5.2-RELEASE FreeBSD 5.2-RELEASE #0: Sun Jan > 11 04:2 > 1:45 GMT 2004 > root@xxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC i386 > > > > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
