Re: Xfree86 Problem on My Virge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



King Kassle wrote:
> I have S3 Virge GX cooperated with 3dfx Voodoo2

> I also tried to use the Xfree 3.x S3V driver to replace
> the Xfree 4.4 driver, the result is good but when exit the
> console screen also crumple like the 4.x.

I strongly recommend that you do not mix and match drivers from different
XFree86 versions, especially from 3.x drivers on a XFree86 4.x system.

> The question is.
> 1. Is there any tips/hint/cheat to solve the problem ?
>    now I use generic VESA driver, but i prefer using S3Virge
>    driver if possible (not glitchy, noisy, etc about bad look)

Can you please send to the list the output of /var/log/XFree86.0.log from
XFree86 4.4 using the 4.4 S3V driver?
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86

[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux