Dear Friend;
Thank you for your prompt response. But it didn't solve the problem.
Actually, the xfs server starts fine during booting, but when I try to
restart with "/etc.rc.d/init.d/xfs restart" command or "service xfs
restart", it says it fails and it seems impossible to kill.
I also tried by deleting the xfs.pid from /var/run directory and
rebooting and it has not worked too.
As you are aware, the problem is with the graphical mode login. I
can login with the text mode but not enter into graphical mode and the
monitor illuminates as if it is trying to enter into the GUI, but goes
black screen, and when I press 'eneter' several times, the textmode
login appears for some time and disappears. However after several
'enter's it gets displayed and I could login in text mode. It all
happened after a power failure in the middle of a running Linux
session.
When I run XConfigurator, It was like this.
1) PCI Probe
PCI Entry: Intel Corp. | 82815 CGC (Chipset Graphics)
X Server: XF86_SVGA
XFree 4 driver: i810
2) Monitor Name : Philips 107S (//mine is 107S5)
Horizontor Sync. Rate: 30-71Khz
Vertical Sync. Rate: 50-160Khz
//when installing RH7.3 I selected default one something like
PHLe..., but there were two top and bottom horizontal black bands
displaying.
4) Video Memory : 16MB (default value)
5) Clock Chip : No clockship ... (recommended one)
6) Video Mode: 24bit 1024x768
7) Then it asked whether I could see the graphical screen, I pressed
yes/
8) Then it asked whether I want to reboot in graphical mode when I
reboot or press startx, I clicked on 'yes'
I rebooted and restarted the computer and login as root in the text
mode and given the command "startx" and it gave a series of error like
this (as visible on my screen, I don't know how to copy, newbie!):
(==) Log file "var/log/XFree86.0.log" Time and date
(==) Using config file "/etc/X11/XF85Config-4"
Could not init. fat (?) path element unix/:7160 remaining from list
Fatal Server error:
Could not open default font 'fixed'
X10: fatal IO error 104 (connection reset by peer) on X server ":0.0"
after 0 requests (0 knonw processed) with 0 events remaining
9) Thereafter I mounted one of the Windows partition and copied the
following XFree86.0.log which reads (and also attached):
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.17-0.13smp i686 [ELF]
Build Host: daffy.perf.redhat.com
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Mar 19 07:49:53 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "PHILIPS 107S"
(**) | |-->Device "Intel 815"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1130 card 8086,4532 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,1132 card 8086,4532 rev 02 class 03,00,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 8086,4532 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 8086,4532 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2443 card 8086,4532 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:4: chip 8086,2444 card 8086,4532 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2445 card 8086,4656 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:08:0: chip 8086,2449 card 8086,3013 rev 01 class 02,00,00 hdr 00
(II) PCI: 01:0c:0: chip 11d4,1805 card 11d4,1805 rev 00 class 07,80,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x02 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xff800000 - 0xff8fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xf6a00000 - 0xf6afffff (0x100000) MX[B]
(II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(0:2:0) Intel i815 rev 2, Mem @ 0xf8000000/26, 0xffa80000/19
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xf6affc00 - 0xf6affcff (0x100) MX[B]
[1] -1 0xff8ef000 - 0xff8effff (0x1000) MX[B]
[2] -1 0xffa80000 - 0xffafffff (0x80000) MX[B](B)
[3] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[4] -1 0x0000df00 - 0x0000df3f (0x40) IX[B]
[5] -1 0x0000ef00 - 0x0000ef3f (0x40) IX[B]
[6] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[7] -1 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
[8] -1 0x0000efa0 - 0x0000efaf (0x10) IX[B]
[9] -1 0x0000ef40 - 0x0000ef5f (0x20) IX[B]
[10] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xf6affc00 - 0xf6affcff (0x100) MX[B]
[1] -1 0xff8ef000 - 0xff8effff (0x1000) MX[B]
[2] -1 0xffa80000 - 0xffafffff (0x80000) MX[B](B)
[3] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[4] -1 0x0000df00 - 0x0000df3f (0x40) IX[B]
[5] -1 0x0000ef00 - 0x0000ef3f (0x40) IX[B]
[6] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[7] -1 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
[8] -1 0x0000efa0 - 0x0000efaf (0x10) IX[B]
[9] -1 0x0000ef40 - 0x0000ef5f (0x20) IX[B]
[10] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xf6affc00 - 0xf6affcff (0x100) MX[B]
[6] -1 0xff8ef000 - 0xff8effff (0x1000) MX[B]
[7] -1 0xffa80000 - 0xffafffff (0x80000) MX[B](B)
[8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0x0000df00 - 0x0000df3f (0x40) IX[B]
[12] -1 0x0000ef00 - 0x0000ef3f (0x40) IX[B]
[13] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[14] -1 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
[15] -1 0x0000efa0 - 0x0000efaf (0x10) IX[B]
[16] -1 0x0000ef40 - 0x0000ef5f (0x20) IX[B]
[17] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "i810"
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.1.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) v4l driver for Video4Linux
(II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815,
i830M
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset i815 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xf6affc00 - 0xf6affcff (0x100) MX[B]
[6] -1 0xff8ef000 - 0xff8effff (0x1000) MX[B]
[7] -1 0xffa80000 - 0xffafffff (0x80000) MX[B](B)
[8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0x0000df00 - 0x0000df3f (0x40) IX[B]
[12] -1 0x0000ef00 - 0x0000ef3f (0x40) IX[B]
[13] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[14] -1 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
[15] -1 0x0000efa0 - 0x0000efaf (0x10) IX[B]
[16] -1 0x0000ef40 - 0x0000ef5f (0x20) IX[B]
[17] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xf6affc00 - 0xf6affcff (0x100) MX[B]
[6] -1 0xff8ef000 - 0xff8effff (0x1000) MX[B]
[7] -1 0xffa80000 - 0xffafffff (0x80000) MX[B](B)
[8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x0000df00 - 0x0000df3f (0x40) IX[B]
[15] -1 0x0000ef00 - 0x0000ef3f (0x40) IX[B]
[16] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[17] -1 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
[18] -1 0x0000efa0 - 0x0000efaf (0x10) IX[B]
[19] -1 0x0000ef40 - 0x0000ef5f (0x20) IX[B]
[20] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[21] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[22] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(**) I810(0): Depth 24, (--) framebuffer bpp 24
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 1024 kB
(II) I810(0): VESA VBE OEM: Intel(R) 815 Chipset Video BIOS
(II) I810(0): VESA VBE OEM Software Rev: 34.105
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(R) 815 Chipset
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: PHL Model: e013 Serial#: 367419
(II) I810(0): Year: 2003 Week: 32
(II) I810(0): EDID Version: 1.3
(II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) I810(0): Sync: Separate
(II) I810(0): Max H-Image Size [cm]: horiz.: 31 vert.: 23
(II) I810(0): Gamma: 2.87
(II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) I810(0): redX: 0.620 redY: 0.350 greenX: 0.290 greenY: 0.610
(II) I810(0): blueX: 0.150 blueY: 0.065 whiteX: 0.283 whiteY: 0.297
(II) I810(0): Supported VESA Video Modes:
(II) I810(0): 720x400@70Hz
(II) I810(0): 640x480@60Hz
(II) I810(0): 640x480@72Hz
(II) I810(0): 640x480@75Hz
(II) I810(0): 800x600@60Hz
(II) I810(0): 800x600@72Hz
(II) I810(0): 800x600@75Hz
(II) I810(0): 832x624@75Hz
(II) I810(0): 1024x768@60Hz
(II) I810(0): 1024x768@70Hz
(II) I810(0): 1024x768@75Hz
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported Future Video Modes:
(II) I810(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) I810(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) I810(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) I810(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) I810(0): #4: hsize: 640 vsize 480 refresh: 100 vid: 26673
(II) I810(0): #5: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) I810(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) I810(0): #7: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 25.2 MHz Image Size: 306 x 230 mm
(II) I810(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) I810(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
(II) I810(0): Serial No: BZ 367419
(II) I810(0): Monitor name: PHILIPS 107S5
(II) I810(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 71 kHz, PixClock max 110 MHz
(--) I810(0): Chipset: "i815"
(--) I810(0): Linear framebuffer at 0xF8000000
(--) I810(0): IO registers at addr 0xFFA80000
(II) I810(0): I810CheckAvailableMemory: 206844k available
(**) I810(0): Will alloc AGP framebuffer: 16384 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): PHILIPS 107S: Using hsync range of 30.00-71.00 kHz
(II) I810(0): PHILIPS 107S: Using vrefresh range of 50.00-160.00 Hz
(II) I810(0): Clock range: 12.00 to 136.00 MHz
(II) I810(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (unknown reason)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1152x864" (hsync out of range)
(II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,PHILIPS 107S) mode clock 122MHz exceeds DDC maximum 110MHz
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(--) I810(0): Virtual size is 1024x768 (pitch 1024)
(**) I810(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) I810(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(--) I810(0): Display dimensions: (310, 230) mm
(--) I810(0): DPI set to (83, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) I810(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xffa80000 - 0xffafffff (0x80000) MS[B]
[1] 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xf6affc00 - 0xf6affcff (0x100) MX[B]
[8] -1 0xff8ef000 - 0xff8effff (0x1000) MX[B]
[9] -1 0xffa80000 - 0xffafffff (0x80000) MX[B](B)
[10] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[11] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000df00 - 0x0000df3f (0x40) IX[B]
[17] -1 0x0000ef00 - 0x0000ef3f (0x40) IX[B]
[18] -1 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[19] -1 0x0000ef80 - 0x0000ef9f (0x20) IX[B]
[20] -1 0x0000efa0 - 0x0000efaf (0x10) IX[B]
[21] -1 0x0000ef40 - 0x0000ef5f (0x20) IX[B]
[22] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[23] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[24] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) I810(0): Write-combining range (0xf8000000,0x4000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): Setting dot clock to 94.5 MHz [ 0x3d 0xe 0x20 ] [ 63 16 2 ]
(II) I810(0): chose watermark 0x22218000: (tab.freq 94.5)
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1024 pages failed
(Cannot allocate memory)
(II) I810(0): No physical memory available for 4194304 bytes of DCACHE
(II) I810(0): Adding 512 scanlines for pixmap caching
(II) I810(0): Allocated Scratch Memory
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(**) Option "dpms"
(**) I810(0): DPMS enabled
(==) I810(0): Direct rendering disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "Microsoft"
(**) Mouse0: Protocol: "Microsoft"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "BaudRate" "1200"
(**) Option "StopBits" "1"
(**) Option "DataBits" "7"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "0"
(**) Option "FlowControl" "None"
(**) Option "Emulate3Buttons" "off"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(**) Mouse0: BaudRate: 1200
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Option "BaudRate" "1200"
Could not init font path element unix/:7100, removing from list!
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xxxxxxxxxxxx
10) Now please guide how to overcome the problem (actually such
problems and a tedious process to migrate to Linux has deviated me
from the process twice last time and this is the third time I am
trying). Currently I have RH7.3 installed on a PIII/1GHz machine with
256MB RAM.
Thanking you in anticipation,
Webocratically yours,
Dr. Sichendra Bista, Chief Architect and Founding Secretary-General
eParliament.org: The Pioneering OPERATIONAL Model of Webocracy
Address for correspondence: GPO Box 10422, Kathmandu, Nepal
Tel: +977 (1) 478 1160/478 2321 Web: http://www.eParliament.org
Fax: +977 (1) 478 2321 Email: NetJustice@xxxxxxxxxxxxxxx
--------------------------------------------------------------------
Peace | Justice | Human Rights | Democracy | Development
--------------------------------------------------------------------
Thursday, March 18, 2004, 10:22:48 PM, you wrote:
PH> On Thursday 18 March 2004 17:15, Dr. Sichendra Bista wrote:
>> While rebooting, it says that some xfs or something killing failed in
>> red. Mine is RH7.3. I shall be obliged if you could help. Thank you!
PH> xfs is the X font server, and without it X will not run. Try to restart it
PH> manually (on your system probably by using
PH> /etc/rc.d/init.d/xfs restart) to
PH> try and find out why it doesn't work properly.
PH> Regards,
PH> Pieter Hulshoff
Attachment:
XFree86.0.log
Description: Binary data
