Re: ViRGE GX trouble (was Re: difference) LONG!

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



hi,
the symptoms are:
-when Im using pure xfree 4.3 without any option my desktop has a yellow
line from up to down in the 1/4 of length of screen.
Mouse cursor has sticked square, which has about 35 mm of length.
When Im moving the mouse cursor on my desktop is appearing a snow similar
to the one which can be obtained when somebody is trying to get some TV
canal by moving the beam-aerial.
When a window is moving on my desktop stays frames of the previous window
positions, so after several movings the desktop is unreadable.

-when Im using the SWCursor option my mouse cursor is drawed correctly
without a square, but during move there is a square smudge after the
cursor.
the problem with smudge is solved when I turn on the ShadowFB option.

With ShadowFB option turned on the smudge and frames didn't appear, but
the "snow" distortion is still there.

The rest of options like early_ras_precharge, late_ras_precharge,
"slow_edodram", "set_mclk" didn't help also.

on my Virge chipset are such overprints:
Q5C4BB
86C385
9721 B4H54
TAIWAN ;-)

At the end of my email is my XFree log.

Thank You for any help.

PS:
I know that the Compaq's Virges are problematic, but maybe is there a
chance to modify the xfree 4.3 driver somehow?
if You want any other info, please tell me that.
if the info that I wrote isnt enough I will try to make a picture of
the damned screen and I will post a letter here once again.

> Would you describe how the desktop is messed up?  That would help us
> understand what you are seeing.
> 
> Does the "noaccel" option in the driver section make the problem go
> away?  Can you post a log file (/var/log/XFree86.0.log) somewhere, for a
> run which you describe the desktop behavior for?
> 
> The S3V server was one of the earlier virge drivers, with the s3virge
> driver in 4.x being a fairly large rewrite of that and the virge support
> in the SVGA driver from 3.3.6.  Very little feedback has come in for
> ViRGE GX, so it sounds like we still have some trouble there.

------

XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.22 i686 [ELF] 
Build Date: 16 September 2003
	Before reporting problems, check http://www.XFree86.Org/
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Feb  9 13:07:20 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "pl"
(**) XKB: layout: "pl"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "DisableModInDev"
(--) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.2
	XFree86 Video Driver: 0.6
	XFree86 XInput driver : 0.4
	XFree86 Server Extension : 0.2
	XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,1595 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:0d:0: chip 5333,8a01 card 0e11,b032 rev 01 class 03,00,00 hdr 00
(II) PCI: 00:10:0: chip 0e11,b011 card 0000,0000 rev 10 class 02,80,00 hdr 00
(II) PCI: 00:14:0: chip 1106,0586 card 0000,0000 rev 31 class 06,01,00 hdr 80
(II) PCI: 00:14:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:14:2: chip 1106,3038 card 0925,1234 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:14:3: chip 1106,3040 card 0000,0000 rev 01 class 00,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:13:0) S3 Inc. ViRGE/DX or /GX rev 1, Mem @ 0x40000000/26
(--) PCI: (0:20:3) VIA Technologies, Inc. VT82C586B ACPI rev 1
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0x44000000 - 0x4400000f (0x10) MX[B]
	[1] -1	0	0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
	[2] -1	0	0x00001000 - 0x0000101f (0x20) IX[B]
	[3] -1	0	0x00001030 - 0x0000103f (0x10) IX[B]
	[4] -1	0	0x00001020 - 0x0000102f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0x44000000 - 0x4400000f (0x10) MX[B]
	[1] -1	0	0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
	[2] -1	0	0x00001000 - 0x0000101f (0x20) IX[B]
	[3] -1	0	0x00001030 - 0x0000103f (0x10) IX[B]
	[4] -1	0	0x00001020 - 0x0000102f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x44000000 - 0x4400000f (0x10) MX[B]
	[6] -1	0	0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[9] -1	0	0x00001000 - 0x0000101f (0x20) IX[B]
	[10] -1	0	0x00001030 - 0x0000103f (0x10) IX[B]
	[11] -1	0	0x00001020 - 0x0000102f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 2.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "xtt"
(II) Loading /usr/X11R6/lib/modules/fonts/libxtt.a
(II) Module xtt: vendor="X-TrueType Server Project"
	compiled for 4.3.0, module version = 1.3.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font xtt
(II) LoadModule: "s3virge"
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.8.6
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.4
(II) S3VIRGE: driver (version 1.8.6) for S3 ViRGE chipsets: virge, 86C325,
	virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
	86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
	trio 3d/2x, 86C362, 86C368
(II) Primary Device is: PCI 00:0d:0
(--) Assigning device section with no busID to primary device
(--) Chipset virge dx found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x44000000 - 0x4400000f (0x10) MX[B]
	[6] -1	0	0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[9] -1	0	0x00001000 - 0x0000101f (0x20) IX[B]
	[10] -1	0	0x00001030 - 0x0000103f (0x10) IX[B]
	[11] -1	0	0x00001020 - 0x0000102f (0x10) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x44000000 - 0x4400000f (0x10) MX[B]
	[6] -1	0	0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
	[7] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[8] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[9] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[10] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[11] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[12] -1	0	0x00001000 - 0x0000101f (0x20) IX[B]
	[13] -1	0	0x00001030 - 0x0000103f (0x10) IX[B]
	[14] -1	0	0x00001020 - 0x0000102f (0x10) IX[B]
	[15] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[16] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.6
(**) S3VIRGE(0): Depth 16, (--) framebuffer bpp 16
(==) S3VIRGE(0): RGB weight 565
(==) S3VIRGE(0): Default visual is TrueColor
(**) S3VIRGE(0): Option "SWCursor"
(**) S3VIRGE(0): Option "ShadowFB"
(**) S3VIRGE(0): Using SW Cursor
(**) S3VIRGE(0): ShadowFB enabled.
(WW) S3VIRGE(0): HW acceleration not supported with "shadowFB".
(==) S3VIRGE(0): Using fb.
(==) S3VIRGE(0): mx_cr3a_fix.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) S3VIRGE(0): initializing int10
(II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
(WW) System lacks support for changing MTRRs
(II) S3VIRGE(0): VESA BIOS detected
(II) S3VIRGE(0): VESA VBE Version 2.0
(II) S3VIRGE(0): VESA VBE Total Mem: 2048 kB
(II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. ViRGE /DX /GX
(II) S3VIRGE(0): VESA VBE OEM Software Rev: 1.1
(II) S3VIRGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) S3VIRGE(0): VESA VBE OEM Product: ViRGE /DX /GX
(II) S3VIRGE(0): VESA VBE OEM Product Rev: Rev B
(--) S3VIRGE(0): Chipset: "virge dx"
(==) S3VIRGE(0): XVideo supported.
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) S3VIRGE(0): VESA VBE DDC supported
(II) S3VIRGE(0): VESA VBE DDC Level 2
(II) S3VIRGE(0): VESA VBE DDC transfer in appr. 1 sec.
(II) S3VIRGE(0): VESA VBE DDC read successfully
(II) S3VIRGE(0): Manufacturer: NEC  Model: 61ad  Serial#: 16843009
(II) S3VIRGE(0): Year: 2000  Week: 20
(II) S3VIRGE(0): EDID Version: 1.2
(II) S3VIRGE(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) S3VIRGE(0): Sync:  Separate  Composite
(II) S3VIRGE(0): Max H-Image Size [cm]: horiz.: 33  vert.: 24
(II) S3VIRGE(0): Gamma: 2.20
(II) S3VIRGE(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) S3VIRGE(0): First detailed timing is preferred mode
(II) S3VIRGE(0): GTF timings supported
(II) S3VIRGE(0): redX: 0.625 redY: 0.338   greenX: 0.281 greenY: 0.602
(II) S3VIRGE(0): blueX: 0.149 blueY: 0.073   whiteX: 0.283 whiteY: 0.297
(II) S3VIRGE(0): Supported VESA Video Modes:
(II) S3VIRGE(0): 720x400@70Hz
(II) S3VIRGE(0): 720x400@88Hz
(II) S3VIRGE(0): 640x480@60Hz
(II) S3VIRGE(0): 640x480@67Hz
(II) S3VIRGE(0): 640x480@72Hz
(II) S3VIRGE(0): 640x480@75Hz
(II) S3VIRGE(0): 800x600@56Hz
(II) S3VIRGE(0): 800x600@60Hz
(II) S3VIRGE(0): 800x600@72Hz
(II) S3VIRGE(0): 800x600@75Hz
(II) S3VIRGE(0): 832x624@75Hz
(II) S3VIRGE(0): 1024x768@87Hz (interlaced)
(II) S3VIRGE(0): 1024x768@60Hz
(II) S3VIRGE(0): 1024x768@70Hz
(II) S3VIRGE(0): 1024x768@75Hz
(II) S3VIRGE(0): 1280x1024@75Hz
(II) S3VIRGE(0): 1152x870@75Hz
(II) S3VIRGE(0): Manufacturer's mask: 0
(II) S3VIRGE(0): Supported Future Video Modes:
(II) S3VIRGE(0): #0: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) S3VIRGE(0): #1: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) S3VIRGE(0): #2: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) S3VIRGE(0): #3: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) S3VIRGE(0): #4: hsize: 1280  vsize 960  refresh: 85  vid: 22913
(II) S3VIRGE(0): #5: hsize: 1280  vsize 1024  refresh: 85  vid: 39297
(II) S3VIRGE(0): #6: hsize: 1600  vsize 1200  refresh: 70  vid: 19113
(II) S3VIRGE(0): Supported additional Video Mode:
(II) S3VIRGE(0): clock: 157.5 MHz   Image Size:  315 x 236 mm
(II) S3VIRGE(0): h_active: 1280  h_sync: 1344  h_sync_end 1504 h_blank_end 1728 h_border: 0
(II) S3VIRGE(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1072 v_border: 0
(II) S3VIRGE(0): Ranges: V min: 55  V max: 160 Hz, H min: 31  H max: 92 kHz, PixClock max 200 MHz
(II) S3VIRGE(0): Monitor name: NEC FE750
(II) S3VIRGE(0): Serial No: 0545327FB
(==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) S3VIRGE(0): videoram:  2048k
(--) S3VIRGE(0): Detected current MCLK value of 74.659 MHz
(II) S3VIRGE(0): My Monitor: Using hsync range of 31.00-92.00 kHz
(II) S3VIRGE(0): My Monitor: Using vrefresh range of 55.00-160.00 Hz
(II) S3VIRGE(0): Clock range:  10.00 to 270.00 MHz
(II) S3VIRGE(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1152x864" (width too large for virtual size)
(II) S3VIRGE(0): Not using default mode "1152x768" (width too large for virtual size)
(--) S3VIRGE(0): Virtual size is 1024x768 (pitch 1024)
(**) S3VIRGE(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(**) S3VIRGE(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) S3VIRGE(0): *Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(II) S3VIRGE(0): Modeline "640x480"   74.25  640 672 752 864  480 480 482 505 doublescan +hsync +vsync
(**) S3VIRGE(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) S3VIRGE(0): *Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) S3VIRGE(0): Modeline "320x200"   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync
(**) S3VIRGE(0):  Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) S3VIRGE(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) S3VIRGE(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) S3VIRGE(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) S3VIRGE(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) S3VIRGE(0):  Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) S3VIRGE(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync
(**) S3VIRGE(0):  Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "960x720"  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync
(**) S3VIRGE(0):  Default mode "928x696": 109.2 MHz, 86.4 kHz, 60.1 Hz (D)
(II) S3VIRGE(0): Modeline "928x696"  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync
(**) S3VIRGE(0):  Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "896x672"  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync
(**) S3VIRGE(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) S3VIRGE(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) S3VIRGE(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) S3VIRGE(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) S3VIRGE(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) S3VIRGE(0):  Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(II) S3VIRGE(0): Modeline "800x600"   94.50  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(II) S3VIRGE(0): Modeline "800x600"   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) S3VIRGE(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) S3VIRGE(0):  Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "800x600"   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) S3VIRGE(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) S3VIRGE(0):  Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(II) S3VIRGE(0): Modeline "700x525"   77.90  700 732 892 956  525 526 532 545 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "700x525"   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
(II) S3VIRGE(0): Modeline "640x512"   78.75  640 672 752 864  512 512 514 536 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(II) S3VIRGE(0): Modeline "640x512"   67.50  640 648 720 844  512 512 514 533 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "640x512"   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) S3VIRGE(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) S3VIRGE(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) S3VIRGE(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) S3VIRGE(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) S3VIRGE(0):  Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "640x480"   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) S3VIRGE(0):  Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) S3VIRGE(0): Modeline "576x432"   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(**) S3VIRGE(0):  Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) S3VIRGE(0): Modeline "576x384"   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) S3VIRGE(0): Modeline "512x384"   47.25  512 536 584 688  384 384 386 404 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) S3VIRGE(0): Modeline "512x384"   39.40  512 520 568 656  384 384 386 400 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) S3VIRGE(0): Modeline "512x384"   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync
(**) S3VIRGE(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) S3VIRGE(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) S3VIRGE(0):  Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) S3VIRGE(0): Modeline "512x384"   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) S3VIRGE(0): Modeline "416x312"   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
(**) S3VIRGE(0):  Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) S3VIRGE(0): Modeline "400x300"   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) S3VIRGE(0): Modeline "400x300"   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) S3VIRGE(0): Modeline "400x300"   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) S3VIRGE(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) S3VIRGE(0): Modeline "400x300"   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) S3VIRGE(0):  Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) S3VIRGE(0): Modeline "320x240"   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync
(**) S3VIRGE(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) S3VIRGE(0): Modeline "320x240"   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync
(**) S3VIRGE(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) S3VIRGE(0): Modeline "320x240"   15.75  320 332 352 416  240 244 245 260 doublescan -hsync -vsync
(**) S3VIRGE(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) S3VIRGE(0): Modeline "320x240"   12.60  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(**) S3VIRGE(0):  Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) S3VIRGE(0): Modeline "360x200"   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync
(**) S3VIRGE(0):  Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) S3VIRGE(0): Modeline "320x175"   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync
(--) S3VIRGE(0): Display dimensions: (330, 240) mm
(--) S3VIRGE(0): DPI set to (78, 81)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.2
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0x40000000 - 0x43ffffff (0x4000000) MS[B]
	[1] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0x44000000 - 0x4400000f (0x10) MX[B]
	[7] -1	0	0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
	[8] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[9] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[10] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[11] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[12] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[13] -1	0	0x00001000 - 0x0000101f (0x20) IX[B]
	[14] -1	0	0x00001030 - 0x0000103f (0x10) IX[B]
	[15] -1	0	0x00001020 - 0x0000102f (0x10) IX[B]
	[16] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[17] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) S3VIRGE(0): Using FB
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "Buttons" "3"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 7
(**) Option "Resolution" "256"
(**) Mouse1: Resolution: 256
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86

[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux