On Sat, 31 Jan 2004, as8z wrote: > Mark Vojkovich wrote: > > > If the server is rejecting the 768x576 modeline, an explanation > >will be in the /var/log/XFree86.0.log file. Post your > >/var/log/XFree86.0.log file to this list. > > > > Mark. > > > >On Fri, 30 Jan 2004, as8z wrote: > > > > > > > >>Hi, > >>I would like to use my tv like a screen. > >>I have no more screen then the tv would be the only display > >>but the tv is 768*576 but the xfree works with 800*600 > >> > >> > >>I try to had on XFreeConfig-4 : > >>ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 > >>and > >> "768x576" "800x600" "640x400" > >> > >> > >>bu it never works > >> > >>how to do ?? > >> > >>thanks alex > >> > >>_______________________________________________ > >>XFree86 mailing list > >>XFree86@xxxxxxxxxxx > >>http://XFree86.Org/mailman/listinfo/xfree86 > >> > >> > >> > > > >_______________________________________________ > >XFree86 mailing list > >XFree86@xxxxxxxxxxx > >http://XFree86.Org/mailman/listinfo/xfree86 > > > > > > > Hi, > > I have got > (II) SAVAGE(0): Not using mode "768x576" (hsync out of range) > (II) SAVAGE(0): Not using mode "768x576" (hsync out of range) > > but I don't know what I shoulw write > Your modeline: ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 Has an hsync of 50e6 / 1000 = 50 kHz, which is outside of the range reported for you monitor in the Section "Monitor". BTW. That modeline has an 79 Hz refresh rate, which is definitely not something a TV would do. A NTSC mode would probably look like: Modeline "768x576_59.97" 34.94 768 792 872 976 576 577 580 597 While a PAL mode would probably look like: Modeline "768x576_50.00" 28.46 768 784 864 960 576 577 580 593 Mark. _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
