That doesn't appear to generate very good modelines. "gtf", which ships with XFree86 4.3, generates the following: # 1280x1024 @ 120.00 Hz (GTF) hsync: 131.64 kHz; pclk: 233.79 MHz Modeline "1280x1024_120.00" 233.79 1280 1384 1528 1776 1024 1025 1028 1097 -HSync +Vsync Mark. On Wed, 28 Jan 2004, Christian Brix Folsted Andersen wrote: > I recently purchased a Iiyama Vision Master Pro 514 monitor and a Quadro > DCC graphics card for viewing molecules with stereo glass. However to > get a view without any flickering I need a refresh rate of around 120 hz > (60 hz for each eye). > > To set the refresh rate I generated a modeline on this site: > http://xtiming.sourceforge.net/cgi-bin/xtiming.pl > (with input that I found in the monitors manual: Horizontal: 30-142 kHz, > Vertical 50-200 Hz, 390kHz dot clock, 1280x1024 resolution, 120 Hz > refresh rate) > > This modeline was the result: > |Modeline "1280x1024@120" 340.71 1280 1312 2600 2632 1024 1040 1060 1076 > > I inserted this line in my XF89Config under the monitor section and > added "1280x1024@120" under modes in the screen section. > _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
