Perhaps your vidcard is not supported nor it could find /etc/X11/X11-config or something like that use xf86config to configure your x11 setup.. Cheers -- Kind regards, Remko Lodder Elvandar.org/DSINet.org www.mostly-harmless.nl Dutch community for helping newcomers on the hackerscene -----Oorspronkelijk bericht----- Van: openbsd-bugs-bounces@xxxxxxxxxxxxxxxxxx [mailto:openbsd-bugs-bounces@xxxxxxxxxxxxxxxxxx]Namens Eddie Wright Verzonden: maandag 12 januari 2004 23:40 Aan: XFree86.org; Bugs OpenBSD Onderwerp: [Openbsd-bugs] startx issue Hope someone can help me out, I'm a real newbie and could do with it. Please refer dmesg.txt for details of hardware / installation and startx error messages When I try to access the /var/log/XFree86.0.log and the xdm_flags I received the message on screen 'Permission Denied' although I'm logged on as root. Regards Eddie Wright OpenBSD 3.2 (GENERIC) #25: Thu Oct 3 19:51:53 MDT 2002 deraadt@xxxxxxxxxxxxxxxx:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Athlon Model 4 (Thunderbird) ("AuthenticAMD" 686-class) 1.41 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR real mem = 267960320 (261680K) avail mem = 242696192 (237008K) using 3296 buffers containing 13500416 bytes (13184K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(31) BIOS, date 02/21/02, BIOS32 rev. 0 @ 0xfb230 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xdf94 pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf10/128 (6 entries) pcibios0: PCI Exclusive IRQs: 5 11 12 pcibios0: no compatible PCI ICU found pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0xc800 0xd0000/0x800 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "VIA VT8366 Host-PCI" rev 0x00 ppb0 at pci0 dev 1 function 0 "VIA VT8366 PCI-AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 MX" rev 0xb2 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) xl0 at pci0 dev 10 function 0 "3Com 3c905C 100Base-TX" rev 0x30: irq 12 address 00:04:75:81:fb:da ukphy0 at xl0 phy 24: Generic IEEE 802.3u media interface ukphy0: OUI 0x00601d, model 0x0035, rev. 0 xl1 at pci0 dev 11 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 5 address 00:04:76:eb:16:9d exphy0 at xl1 phy 24: 3Com internal media interface pcib0 at pci0 dev 17 function 0 "VIA VT8233 PCI-ISA" rev 0x00 pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <MAXTOR 6L040J2> wd0: 16-sector PIO, LBA, 38172MB, 16383 cyl, 16 head, 63 sec, 78177792 sectors atapiscsi0 at pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets sd0 at scsibus0 targ 0 lun 0: <IOMEGA, ZIP 100, 03.H> SCSI0 0/direct removable sd0: drive offline wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 sd0(pciide0:0:1): using PIO mode 3, DMA mode 1 atapiscsi1 at pciide0 channel 1 drive 0 scsibus1 at atapiscsi1: 2 targets cd0 at scsibus1 targ 0 lun 0: <SONY, CD-ROM CDU5221, 0.35> SCSI0 5/cdrom removable wd1 at pciide0 channel 1 drive 1: <Maxtor 6E040L0> wd1: 16-sector PIO, LBA, 39205MB, 16383 cyl, 16 head, 63 sec, 80293248 sectors cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 wd1(pciide0:1:1): using PIO mode 4, DMA mode 2 uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 5 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 5 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97 Audio" rev 0x40: irq 12 ac97: codec id 0x49434511 (ICEnsemble ICE1232) ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D audio0 at auvia0 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask c060 netmask d060 ttymask d0e2 pctr: user-level cycle counter enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matched BIOS disk 80 wd1: no disk label dkcsum: wd1 matched BIOS disk 81 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 WARNING: / was not properly unmounted uhidev0 at uhub0 port 2 configuration 1 interface 0 uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1 ums0 at uhidev0: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 XFree86.4.2.1 () for openbsd / X Window system (protocal version 11, revision 0, vendor release 6600 Release Date: 3 September 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.org/) Build Operating system: OpenBSD 3.2 i386 Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan 12 22:05:39 2004 (EE) Unable to locate/open config file (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the las message. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to xfree86@xxxxxxxxxxxx giving up. xinit: Connection refused (errno 61): unable to connect to X server xinit: No such process (errno 3): Server error _______________________________________________ Openbsd-bugs mailing list Openbsd-bugs@xxxxxxxxxxxxxxxxxx http://lists.elvandar.org/mailman/listinfo/openbsd-bugs _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
