|
Hope someone can help me out, I'm a real newbie and
could do with it.
Please refer dmesg.txt for details of hardware /
installation and startx error messages
When I try to access the
/var/log/XFree86.0.log and the xdm_flags I received the message on
screen
'Permission Denied' although I'm logged on as
root.
Regards
Eddie Wright
|
OpenBSD 3.2 (GENERIC) #25: Thu Oct 3 19:51:53 MDT 2002
deraadt@xxxxxxxxxxxxxxxx:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon Model 4 (Thunderbird) ("AuthenticAMD" 686-class) 1.41 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 267960320 (261680K)
avail mem = 242696192 (237008K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(31) BIOS, date 02/21/02, BIOS32 rev. 0 @ 0xfb230
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xdf94
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf10/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 5 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc800 0xd0000/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 Host-PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 MX" rev 0xb2
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xl0 at pci0 dev 10 function 0 "3Com 3c905C 100Base-TX" rev 0x30: irq 12 address 00:04:75:81:fb:da
ukphy0 at xl0 phy 24: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00601d, model 0x0035, rev. 0
xl1 at pci0 dev 11 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 5 address 00:04:76:eb:16:9d
exphy0 at xl1 phy 24: 3Com internal media interface
pcib0 at pci0 dev 17 function 0 "VIA VT8233 PCI-ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <MAXTOR 6L040J2>
wd0: 16-sector PIO, LBA, 38172MB, 16383 cyl, 16 head, 63 sec, 78177792 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
sd0 at scsibus0 targ 0 lun 0: <IOMEGA, ZIP 100, 03.H> SCSI0 0/direct removable
sd0: drive offline
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
sd0(pciide0:0:1): using PIO mode 3, DMA mode 1
atapiscsi1 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi1: 2 targets
cd0 at scsibus1 targ 0 lun 0: <SONY, CD-ROM CDU5221, 0.35> SCSI0 5/cdrom removable
wd1 at pciide0 channel 1 drive 1: <Maxtor 6E040L0>
wd1: 16-sector PIO, LBA, 39205MB, 16383 cyl, 16 head, 63 sec, 80293248 sectors
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
wd1(pciide0:1:1): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97 Audio" rev 0x40: irq 12
ac97: codec id 0x49434511 (ICEnsemble ICE1232)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c060 netmask d060 ttymask d0e2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
wd1: no disk label
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
XFree86.4.2.1 () for openbsd / X Window system (protocal version 11, revision 0, vendor release 6600 Release Date: 3 September 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.org/) Build Operating system: OpenBSD 3.2 i386 Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jan 12 22:05:39 2004 (EE) Unable to locate/open config file (EE) Error from xf86HandleConfigFile() Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the las message. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to xfree86@xxxxxxxxxxxx giving up. xinit: Connection refused (errno 61): unable to connect to X server xinit: No such process (errno 3): Server error
