SuSE X Issues

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello to all on the X86 group. Thanks for you product. Learning Linux and X
a little better every day. Been using RH 7.3 for quite some time but wanted
to update my laptop. Below is the email I submitted to the local LUGs I
participate in and tried a few suggestions to no avail. Suggestion was to
post a question to you guys:>) Hope this is what you need. Any suggestions
appreciated. 

PS:I did peruse the XFree86.org site to see if anyone else had a similar
issue. SAX2 does not seem to have any ability to 'adjust' the screen (though
If my understanding of TFT serves this would be expected).

**************
I decided to give SuSE 9 a try.

Install: Went rather well considering it was a network install. The
interface was ok. Had to do install over internet as I wanted to try it
before making any monetary investments in media. First issue was that you
have to record your source server(s) and directory path for the installation
location. (Oh, and not just the names but the IP as name resolution does not
function outside of manual intervention.) You also had to manually tell it
to detect and enable the NIC, quite important for a network install.

After a rough start, which I chalked up to that who German 'way of doing
things', I walked through the post install mini configuration. Was seemingly
simple; prompted me to enable all pertinent devices, even go my sound card
and win-modem. 

First boot: Boot time was a tad slow but not completely unusual. Apparently
it does some kind of automatic logon of the user account you create. (don't
remember it asking me to turn that on). The real problem was that the screen
was split 3/4 of the way down and then "wrapped back onto itself". Kind of
hard to explain but it was like the 'bottom' of the screen was about 2inches
too high and then instead of truncating it (or where you have to 'pan' the
mouse up to see the rest) it just wrapped the missing top 2inches of the
monitor down onto the bottom. I ran the configurator and tried different
video monitors, cards, etc to no avail. Tried to find a 'bugzilla' for SuSE
but that does not seem to exist. Ended up emailing support@xxxxxxxx and go a
response back telling me to respond with the support number off my copy of
SuSE. (though the email did point to a site that had some archived help
fixes that I checked out.... nothing about this kind of issue sience 2.2v
kernel stuff). The situation would have been workable if not for the last
feature that Konquer's functionality as a web browser is abysmal and my
selection of Mozilla as an 'additional' option to be installed ended up with
a plethora of missing configuration files. This meant I had to reboot into
windows to look for and try fixes.

I believe it is a XF86Config file issue. So long as the TFT is disabled the
system boots fine with a regular monitor. I copied the configuration file
from a Knoppix 3.3 (which works great) and after cleaning up some font
references X started but had the same issue.(I also did the same for a
Fedora XF86Config file which was the exact same 4.3.0 version).

After googling around for a while I have just about given up on SuSE. Sad,
considering that most big OEMs are hopping in bed with them as fast as they
can as one of the last 'corporate' distros.

XF86Config file:(this is a Fedora version +mod to Font section)
************************
# XFree86 4 configuration created by pyxf86config

Section "Server Layout"
	Identifier     "Default Layout"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "DevInputMice" "AlwaysCore"
EndSection

Section "Files"
 FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/local"
  FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/URW"
  FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
  FontPath     "/usr/X11R6/lib/X11/fonts/PEX"
  FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/kwintv"
  FontPath     "/usr/X11R6/lib/X11/fonts/truetype"
  FontPath     "/usr/X11R6/lib/X11/fonts/uni:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/CID"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/kwintv"
  FontPath     "/usr/X11R6/lib/X11/fonts/truetype"
  FontPath     "/usr/X11R6/lib/X11/fonts/uni:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/CID"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/xtest"
  InputDevices "/dev/ttyS0"
  InputDevices "/dev/ttyS1"
  InputDevices "/dev/ttyS2"
  InputDevices "/dev/ttyS3"
  InputDevices "/dev/ttyS4"
  InputDevices "/dev/ttyS5"
  InputDevices "/dev/ttyS6"
  InputDevices "/dev/ttyS7"
  InputDevices "/dev/ttyS8"
  InputDevices "/dev/psaux"
  InputDevices "/dev/logibm"
  InputDevices "/dev/sunmouse"
  InputDevices "/dev/atibm"
  InputDevices "/dev/amigamouse"
  InputDevices "/dev/atarimouse"
  InputDevices "/dev/inportbm"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/mouse"
  InputDevices "/dev/usbmouse"
  InputDevices "/dev/adbmouse"
  InputDevices "/dev/input/mice"
  InputDevices "/dev/input/event0"
  InputDevices "/dev/pointer0"
  InputDevices "/dev/pointer1"
  InputDevices "/dev/pointer2"
  InputDevices "/dev/pointer3"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbRules" "xfree86"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "PS/2"
	Option	    "Device" "/dev/psaux"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
	Identifier  "DevInputMice"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "no"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "0"
	HorizSync    31.5 - 48.5
	VertRefresh  40.0 - 70.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "ati"
	VendorName  "Videocard vendor"
	BoardName   "ATI Mach64"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection
*******************************

Jeremey Wise
Systems Consultant(CNE,MCSE,CSE)
Agilysys, Inc.
Jeremey.Wise@xxxxxxxxxxxx
_______________________________________________
wplug mailing list
wplug@xxxxxxxxx
http://www.wplug.org/mailman/listinfo/wplug

_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86

[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux