Maybe the framebuffer device doesn't support it? Why don't you use the "nv" driver instead? It supported it in 4.3 and onward. Mark. On Thu, 18 Dec 2003, [ks_c_5601-1987] ÃÖ¿µÀÏ wrote: > > Hi, everyone > > I have Geforce4 420 Go VGA chip in My board. > Now, I knew linux-2.6.xx support Geforce4 420 go at rivafb. > so I think I am lucky. and I compile 2.6.xx kernel. and insmod rivafb.ko > and configuration /etc/X11/XF86config and then startx. > but can't startx because of some problems. > What'up? > > here are XF86config and log file. > > /etc/X11/XF86config > ---snip---- > Section "Device" > Identifier "Videocard0" > Driver "fbdev" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Videocard0" > Monitor "Monitor0" > DefaultDepth 24 > SubSection "Display" > Depth 24 > Modes "default" > EndSubSection > EndSection > -----snip------ > > /var/log/XFree86.0.log > -----snip------ > (II) FBDEV: driver for framebuffer: fbdev, afb > (II) Primary Device is: PCI 01:00:0 > (II) Loading sub module "fbdevhw" > (II) LoadModule: "fbdevhw" > (II) Reloading /usr/X11R6/lib/modules/linux/libfbdevhw.a > (II) FBDEV(0): using default device > (II) Running in FRAMEBUFFER Mode > (**) FBDEV(0): Depth 24, (--) framebuffer bpp 32 > (==) FBDEV(0): RGB weight 888 > (==) FBDEV(0): Default visual is TrueColor > (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0) > (II) FBDEV(0): Hardware: nVidiaGeForce4-4 (vidmem: 32768k) > (II) FBDEV(0): Checking Modes against framebuffer device... > (II) FBDEV(0): mode "default" not found > (II) FBDEV(0): Checking Modes against monitor... > (--) FBDEV(0): Virtual size is 640x480 (pitch 640) > (**) FBDEV(0): Built-in mode "current": 25.2 MHz, 31.5 kHz, 59.9 Hz > (II) FBDEV(0): Modeline "current" 25.18 640 664 760 800 480 491 493 525 -hsync -vsync -csync > (**) FBDEV(0): Display dimensions: (340, 270) mm > (**) FBDEV(0): DPI set to (47, 45) > (EE) FBDEV(0): Fbdev type (137547164) not supported yet.(II) UnloadModule: "fbdev" > (II) UnloadModule: "fbdevhw" > (EE) Screen(s) found, but none have a usable configuration. > > Fatal server error: > no screens found > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.0.log". > Please report problems to xfree86@xxxxxxxxxxxx > > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 > _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
