[XFree86]With Geforce4 420 Go , I can't start startx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 
Hi, everyone

I have Geforce4 420 Go VGA chip in My board.
Now, I knew linux-2.6.xx support Geforce4 420 go at rivafb.
so I think I am lucky. and I compile 2.6.xx kernel. and insmod rivafb.ko
and configuration /etc/X11/XF86config and then startx.
but can't startx because of some problems.
What'up?

here are XF86config and log file.

/etc/X11/XF86config
---snip----
Section "Device"
        Identifier  "Videocard0"
        Driver      "fbdev"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Depth     24
                Modes     "default"
        EndSubSection
EndSection
-----snip------

/var/log/XFree86.0.log
-----snip------
(II) FBDEV: driver for framebuffer: fbdev, afb
(II) Primary Device is: PCI 01:00:0
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Reloading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) FBDEV(0): using default device
(II) Running in FRAMEBUFFER Mode
(**) FBDEV(0): Depth 24, (--) framebuffer bpp 32
(==) FBDEV(0): RGB weight 888
(==) FBDEV(0): Default visual is TrueColor
(==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDEV(0): Hardware: nVidiaGeForce4-4 (vidmem: 32768k)
(II) FBDEV(0): Checking Modes against framebuffer device...
(II) FBDEV(0):  mode "default" not found
(II) FBDEV(0): Checking Modes against monitor...
(--) FBDEV(0): Virtual size is 640x480 (pitch 640)
(**) FBDEV(0):  Built-in mode "current": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) FBDEV(0): Modeline "current"   25.18  640 664 760 800  480 491 493 525 -hsync -vsync -csync
(**) FBDEV(0): Display dimensions: (340, 270) mm
(**) FBDEV(0): DPI set to (47, 45)
(EE) FBDEV(0): Fbdev type (137547164) not supported yet.(II) UnloadModule: "fbdev"
(II) UnloadModule: "fbdevhw"
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xxxxxxxxxxxx

_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86

[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux