XFree starts and runs fine but does not allow the use of any resolutions above 640x480. Looking through the logs seems to indicate that the monitor is not providing any DDC data, so the X server refuses to use any modes above 640x480. I did some web/newsgroup searching and saw a few reports of similar problems but no solutions.
I've tried various combinations of Option "DDCMode", "NoDDC", "IgnoreEDID", "CrtScreen", and "crt_screen" which all failed to fix the problem.
Any suggestions?
Here are the relevant lines from the log:
(II) RADEON(0): Primary Display == Type 3 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.2.0 ABI class: XFree86 Video Driver, version 0.6 (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=35000; xclk=18000 (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0) (II) RADEON(0): Validating modes on Primary head (DDCType: 0) --------- (II) RADEON(0): Total number of valid DDC mode(s) found: 0 (WW) RADEON(0): Mode 1280x1024 is out of range. (WW) RADEON(0): Valid modes must be between 320x200-640x480 (II) RADEON(0): No valid mode specified, force to native mdoe (II) RADEON(0): Total number of valid FP mode(s) found: 1 (--) RADEON(0): Virtual size is 640x480 (pitch 640) (**) RADEON(0): *Mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz (II) RADEON(0): Modeline "640x480" 25.17 640 656 752 800 480 490 492 525 (==) RADEON(0): DPI set to (75, 75)
Thanks, Phil
_______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
