take a look at the output of dmesg or your kernel log. You need to load via_agp.ko and agpgart.ko and radeon.ko Alex --- tacorner@xxxxxxxxx wrote: > You found that quickly. I don't know what the chipset is. How can I > figure > that out? I am researching the kernel. Their ads sayit has a via > chipset. So I > tried tust the via-agp module and got the same problem. I looked > again and the > mother board should have a Via ProSavage KN400 chipset. I can't tell > whether > that includes the agp. I have agp support built into the kernel, but > the > chipset specific stuff shoukd be in the agp modules you saw. I have > loaded > basicly all of them and yes Windows says the agp is via, but via-agp > doesn't > work. > > Tom > > > > On 04-Dec-2003 Alex Deucher wrote: > > it seem to be an AGP problem: > > (WW) RADEON(0): [agp] AGP not available > > (EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI. > > (II) RADEON(0): [agp] You may want to make sure the agpgart kernel > > module is loaded before the radeon kernel module. > > > > it looks like you have lots of agp modules loaded (ati_agp, > via_agp, > > sis_agp, amd_k7_agp). AGP in 2.6 is somewhat different than 2.4. > > rather than a single agpgart module it has an agpgart module plus > > various chipset specifc drivers. you need to load the one for you > > chipset. what chipset do you have? > > > > Alex > > > > --- tacorner@xxxxxxxxx wrote: > >> On 04-Dec-2003 Alex Deucher wrote: > >> > what does your xfree86 log say? how about the output of lsmod > or > >> your > >> > dmesg? > >> > > >> lsmod: > >> > >> Module Size Used by > >> ati_agp 6284 - > >> via_agp 5600 - > >> sis_agp 3840 - > >> amd_k7_agp 5548 - > >> evdev 7296 - > >> snd_via82xx 21568 - > >> ohci_hcd 16000 - > >> ide_scsi 12164 - > >> rtc 10600 - > >> > >> > >> > >> XFree86.0.log: > >> _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 > >> _XSERVTransOpen: transport open failed for inet6/wanderer:0 > >> _XSERVTransMakeAllCOTSServerListeners: failed to open listener for > >> inet6 > >> > >> This is a pre-release version of XFree86, and is not supported in > any > >> way. Bugs may be reported to XFree86@xxxxxxxxxxx and patches > >> submitted > >> to fixes@xxxxxxxxxxxx Before reporting bugs in pre-release > versions, > >> please check the latest version in the XFree86 CVS repository > >> (http://www.XFree86.Org/cvs). > >> > >> XFree86 Version 4.3.99.16 > >> Release Date: 20 November 2003 > >> X Protocol Version 11, Revision 0, Release 6.6 > >> Build Operating System: Linux 2.6.0-test10 i686 [ELF] > >> Current Operating System: Linux wanderer 2.6.0-test10 #2 Thu Dec 4 > >> 02:37:18 CET > >> 2003 i686 > >> Build Date: 04 December 2003 > >> Changelog Date: 21 November 2003 > >> Before reporting problems, check http://www.XFree86.Org/ > >> to make sure that you have the latest version. > >> Module Loader present > >> Markers: (--) probed, (**) from config file, (==) default setting, > >> (++) from command line, (!!) notice, (II) informational, > >> (WW) warning, (EE) error, (NI) not implemented, (??) > unknown. > >> (==) Log file: "/var/log/XFree86.0.log", Time: Thu Dec 4 17:31:00 > >> 2003 > >> (==) Using config file: "/etc/X11/XF86Config" > >> (==) ServerLayout "Simple Layout" > >> (**) |-->Screen "Screen 1" (0) > >> (**) | |-->Monitor "flatpanel" > >> (**) | |-->Device "radeon-9200" > >> (**) |-->Input Device "Mouse1" > >> (**) |-->Input Device "Keyboard1" > >> (**) Option "AutoRepeat" "500 30" > >> (**) Option "XkbRules" "xfree86" > >> (**) XKB: rules: "xfree86" > >> (**) Option "XkbModel" "pc105" > >> (**) XKB: model: "pc105" > >> (**) Option "XkbLayout" "de" > >> (**) XKB: layout: "de" > >> (**) Option "XkbVariant" "nodeadkeys" > >> (**) XKB: variant: "nodeadkeys" > >> (==) Keyboard: CustomKeycode disabled > >> (**) FontPath set to > >> > > > "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib > > /X > >> 11/fonts/75dpi/:unscaled,/ > >> > > > usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr > > /X > >> 11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fo > >> nts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > >> (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > >> (==) ModulePath set to "/usr/X11R6/lib/modules" > >> (WW) Open APM failed (/dev/apm_bios) (No such device) > >> (II) Module ABI versions: > >> XFree86 ANSI C Emulation: 0.2 > >> XFree86 Video Driver: 0.7 > >> XFree86 XInput driver : 0.4 > >> XFree86 Server Extension : 0.2 > >> XFree86 Font Renderer : 0.4 > >> (II) Loader running on linux > >> (II) LoadModule: "bitmap" > >> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > >> (II) Module bitmap: vendor="The XFree86 Project" > >> compiled for 4.3.99.16, module version = 1.0.0 > >> Module class: XFree86 Font Renderer > >> ABI class: XFree86 Font Renderer, version 0.4 > >> (II) Loading font Bitmap > >> (II) LoadModule: "pcidata" > >> (II) Loading /usr/X11R6/lib/modules/libpcidata.a > >> (II) Module pcidata: vendor="The XFree86 Project" > >> compiled for 4.3.99.16, module version = 1.0.0 > >> ABI class: XFree86 Video Driver, version 0.7 > >> (--) using VT number 7 > >> > >> (II) PCI: Probing config type using method 1 > >> (II) PCI: Config type is 1 > >> (II) PCI: stages = 0x03, oldVal1 = 0x80000090, mode1Res1 = > 0x80000000 > >> (II) PCI: PCI scan (all values are in hex) > >> (II) PCI: 00:00:0: chip 1106,3205 card 1106,7205 rev 00 class > >> 06,00,00 hdr 00 > >> (II) PCI: 00:01:0: chip 1106,b168 card 0000,0000 rev 00 class > >> 06,04,00 hdr 01 > >> (II) PCI: 00:07:0: chip 104c,ac50 card 0000,0000 rev 02 class > >> 06,07,00 hdr 02 > >> (II) PCI: 00:08:0: chip 104c,8026 card 1025,0033 rev 00 class > >> 0c,00,10 hdr 00 > >> (II) PCI: 00:09:0: chip 10ec,8180 card 10ec,8180 rev 20 class > >> 02,00,00 hdr 00 > >> (II) PCI: 00:10:0: chip 1106,3038 card 1025,0033 rev 80 class > >> 0c,03,00 hdr 80 > >> (II) PCI: 00:10:1: chip 1106,3038 card 1025,0033 rev 80 class > >> 0c,03,00 hdr 80 > >> (II) PCI: 00:10:2: chip 1106,3038 card 1025,0033 rev 80 class > >> 0c,03,00 hdr 80 > >> (II) PCI: 00:10:3: chip 1106,3104 card 1025,0033 rev 82 class > >> 0c,03,20 hdr 00 > >> (II) PCI: 00:11:0: chip 1106,3177 card 1025,0033 rev 00 class > >> 06,01,00 hdr 80 > >> (II) PCI: 00:11:1: chip 1106,0571 card 1025,0033 rev 06 class > >> 01,01,8a hdr 00 > >> (II) PCI: 00:11:5: chip 1106,3059 card 1025,0033 rev 50 class > >> 04,01,00 hdr 00 > >> (II) PCI: 00:11:6: chip 1106,3068 card 1025,0033 rev 80 class > >> 07,80,00 hdr 00 > >> (II) PCI: 00:12:0: chip 1106,3065 card 1025,0033 rev 74 class > >> 02,00,00 hdr 00 > >> (II) PCI: 01:00:0: chip 1002,5c61 card 1025,0033 rev 01 class > >> 03,00,00 hdr 00 > >> (II) PCI: End of PCI scan > >> (II) Host-to-PCI bridge: > >> (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN > is > >> set) > >> (II) Bus 0 I/O range: > >> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > >> (II) Bus 0 non-prefetchable memory range: > >> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > >> (II) Bus 0 prefetchable memory range: > >> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > >> (II) PCI-to-PCI bridge: > >> (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN > is > >> set) > >> (II) Bus 1 I/O range: > >> [0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B] > >> [1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B] > >> [2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B] > >> [3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B] > >> (II) Bus 1 non-prefetchable memory range: > >> [0] -1 0 0xd0100000 - 0xd01fffff (0x100000) MX[B] > === message truncated === __________________________________ Do you Yahoo!? Free Pop-Up Blocker - Get it now http://companion.yahoo.com/ _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
