You found that quickly. I don't know what the chipset is. How can I figure that out? I am researching the kernel. Their ads sayit has a via chipset. So I tried tust the via-agp module and got the same problem. I looked again and the mother board should have a Via ProSavage KN400 chipset. I can't tell whether that includes the agp. I have agp support built into the kernel, but the chipset specific stuff shoukd be in the agp modules you saw. I have loaded basicly all of them and yes Windows says the agp is via, but via-agp doesn't work. Tom On 04-Dec-2003 Alex Deucher wrote: > it seem to be an AGP problem: > (WW) RADEON(0): [agp] AGP not available > (EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI. > (II) RADEON(0): [agp] You may want to make sure the agpgart kernel > module is loaded before the radeon kernel module. > > it looks like you have lots of agp modules loaded (ati_agp, via_agp, > sis_agp, amd_k7_agp). AGP in 2.6 is somewhat different than 2.4. > rather than a single agpgart module it has an agpgart module plus > various chipset specifc drivers. you need to load the one for you > chipset. what chipset do you have? > > Alex > > --- tacorner@xxxxxxxxx wrote: >> On 04-Dec-2003 Alex Deucher wrote: >> > what does your xfree86 log say? how about the output of lsmod or >> your >> > dmesg? >> > >> lsmod: >> >> Module Size Used by >> ati_agp 6284 - >> via_agp 5600 - >> sis_agp 3840 - >> amd_k7_agp 5548 - >> evdev 7296 - >> snd_via82xx 21568 - >> ohci_hcd 16000 - >> ide_scsi 12164 - >> rtc 10600 - >> >> >> >> XFree86.0.log: >> _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 >> _XSERVTransOpen: transport open failed for inet6/wanderer:0 >> _XSERVTransMakeAllCOTSServerListeners: failed to open listener for >> inet6 >> >> This is a pre-release version of XFree86, and is not supported in any >> way. Bugs may be reported to XFree86@xxxxxxxxxxx and patches >> submitted >> to fixes@xxxxxxxxxxxx Before reporting bugs in pre-release versions, >> please check the latest version in the XFree86 CVS repository >> (http://www.XFree86.Org/cvs). >> >> XFree86 Version 4.3.99.16 >> Release Date: 20 November 2003 >> X Protocol Version 11, Revision 0, Release 6.6 >> Build Operating System: Linux 2.6.0-test10 i686 [ELF] >> Current Operating System: Linux wanderer 2.6.0-test10 #2 Thu Dec 4 >> 02:37:18 CET >> 2003 i686 >> Build Date: 04 December 2003 >> Changelog Date: 21 November 2003 >> Before reporting problems, check http://www.XFree86.Org/ >> to make sure that you have the latest version. >> Module Loader present >> Markers: (--) probed, (**) from config file, (==) default setting, >> (++) from command line, (!!) notice, (II) informational, >> (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >> (==) Log file: "/var/log/XFree86.0.log", Time: Thu Dec 4 17:31:00 >> 2003 >> (==) Using config file: "/etc/X11/XF86Config" >> (==) ServerLayout "Simple Layout" >> (**) |-->Screen "Screen 1" (0) >> (**) | |-->Monitor "flatpanel" >> (**) | |-->Device "radeon-9200" >> (**) |-->Input Device "Mouse1" >> (**) |-->Input Device "Keyboard1" >> (**) Option "AutoRepeat" "500 30" >> (**) Option "XkbRules" "xfree86" >> (**) XKB: rules: "xfree86" >> (**) Option "XkbModel" "pc105" >> (**) XKB: model: "pc105" >> (**) Option "XkbLayout" "de" >> (**) XKB: layout: "de" >> (**) Option "XkbVariant" "nodeadkeys" >> (**) XKB: variant: "nodeadkeys" >> (==) Keyboard: CustomKeycode disabled >> (**) FontPath set to >> > "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib > /X >> 11/fonts/75dpi/:unscaled,/ >> > usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr > /X >> 11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fo >> nts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" >> (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" >> (==) ModulePath set to "/usr/X11R6/lib/modules" >> (WW) Open APM failed (/dev/apm_bios) (No such device) >> (II) Module ABI versions: >> XFree86 ANSI C Emulation: 0.2 >> XFree86 Video Driver: 0.7 >> XFree86 XInput driver : 0.4 >> XFree86 Server Extension : 0.2 >> XFree86 Font Renderer : 0.4 >> (II) Loader running on linux >> (II) LoadModule: "bitmap" >> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a >> (II) Module bitmap: vendor="The XFree86 Project" >> compiled for 4.3.99.16, module version = 1.0.0 >> Module class: XFree86 Font Renderer >> ABI class: XFree86 Font Renderer, version 0.4 >> (II) Loading font Bitmap >> (II) LoadModule: "pcidata" >> (II) Loading /usr/X11R6/lib/modules/libpcidata.a >> (II) Module pcidata: vendor="The XFree86 Project" >> compiled for 4.3.99.16, module version = 1.0.0 >> ABI class: XFree86 Video Driver, version 0.7 >> (--) using VT number 7 >> >> (II) PCI: Probing config type using method 1 >> (II) PCI: Config type is 1 >> (II) PCI: stages = 0x03, oldVal1 = 0x80000090, mode1Res1 = 0x80000000 >> (II) PCI: PCI scan (all values are in hex) >> (II) PCI: 00:00:0: chip 1106,3205 card 1106,7205 rev 00 class >> 06,00,00 hdr 00 >> (II) PCI: 00:01:0: chip 1106,b168 card 0000,0000 rev 00 class >> 06,04,00 hdr 01 >> (II) PCI: 00:07:0: chip 104c,ac50 card 0000,0000 rev 02 class >> 06,07,00 hdr 02 >> (II) PCI: 00:08:0: chip 104c,8026 card 1025,0033 rev 00 class >> 0c,00,10 hdr 00 >> (II) PCI: 00:09:0: chip 10ec,8180 card 10ec,8180 rev 20 class >> 02,00,00 hdr 00 >> (II) PCI: 00:10:0: chip 1106,3038 card 1025,0033 rev 80 class >> 0c,03,00 hdr 80 >> (II) PCI: 00:10:1: chip 1106,3038 card 1025,0033 rev 80 class >> 0c,03,00 hdr 80 >> (II) PCI: 00:10:2: chip 1106,3038 card 1025,0033 rev 80 class >> 0c,03,00 hdr 80 >> (II) PCI: 00:10:3: chip 1106,3104 card 1025,0033 rev 82 class >> 0c,03,20 hdr 00 >> (II) PCI: 00:11:0: chip 1106,3177 card 1025,0033 rev 00 class >> 06,01,00 hdr 80 >> (II) PCI: 00:11:1: chip 1106,0571 card 1025,0033 rev 06 class >> 01,01,8a hdr 00 >> (II) PCI: 00:11:5: chip 1106,3059 card 1025,0033 rev 50 class >> 04,01,00 hdr 00 >> (II) PCI: 00:11:6: chip 1106,3068 card 1025,0033 rev 80 class >> 07,80,00 hdr 00 >> (II) PCI: 00:12:0: chip 1106,3065 card 1025,0033 rev 74 class >> 02,00,00 hdr 00 >> (II) PCI: 01:00:0: chip 1002,5c61 card 1025,0033 rev 01 class >> 03,00,00 hdr 00 >> (II) PCI: End of PCI scan >> (II) Host-to-PCI bridge: >> (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is >> set) >> (II) Bus 0 I/O range: >> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] >> (II) Bus 0 non-prefetchable memory range: >> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] >> (II) Bus 0 prefetchable memory range: >> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] >> (II) PCI-to-PCI bridge: >> (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is >> set) >> (II) Bus 1 I/O range: >> [0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B] >> [1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B] >> [2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B] >> [3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B] >> (II) Bus 1 non-prefetchable memory range: >> [0] -1 0 0xd0100000 - 0xd01fffff (0x100000) MX[B] >> (II) Bus 1 prefetchable memory range: >> [0] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B] >> (II) PCI-to-CardBus bridge: >> (II) Bus 2: bridge is at (0:7:0), (0,2,5), BCTRL: 0x0340 (VGA_EN is >> cleared) >> (II) PCI-to-ISA bridge: >> (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN >> is set) >> (--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5c61) rev >> 1, Mem @ >> 0xd8000000/27, 0xd0100000/16, I/O @ 0x9000/8 >> (II) Addressable bus resource ranges are >> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] >> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] >> (II) OS-reported resource ranges: >> [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) >> [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) >> MX[B]E(B) >> [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] >> [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] >> [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] >> [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] >> [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] >> (II) PCI Memory resource overlap reduced 0xe0000000 from 0xefffffff >> to >> 0xdfffffff >> (II) Active PCI resource ranges: >> [0] -1 0 0xd0005000 - 0xd00050ff (0x100) MX[B] >> [1] -1 0 0xd0004c00 - 0xd0004cff (0x100) MX[B] >> [2] -1 0 0xd0004800 - 0xd00048ff (0x100) MX[B] >> [3] -1 0 0xd0000000 - 0xd0003fff (0x4000) MX[B] >> [4] -1 0 0xd0004000 - 0xd00047ff (0x800) MX[B] >> [5] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O >> [6] -1 0 0xd0100000 - 0xd010ffff (0x10000) MX[B](B) >> [7] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B) >> [8] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] >> [9] -1 0 0x00001800 - 0x000018ff (0x100) IX[B] >> [10] -1 0 0x00001400 - 0x000014ff (0x100) IX[B] >> [11] -1 0 0x00002060 - 0x0000206f (0x10) IX[B] >> [12] -1 0 0x00002040 - 0x0000205f (0x20) IX[B] >> [13] -1 0 0x00002020 - 0x0000203f (0x20) IX[B] >> [14] -1 0 0x00002000 - 0x0000201f (0x20) IX[B] >> [15] -1 0 0x00001000 - 0x000010ff (0x100) IX[B] >> [16] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B) >> (II) Active PCI resource ranges after removing overlaps: >> [0] -1 0 0xd0005000 - 0xd00050ff (0x100) MX[B] >> [1] -1 0 0xd0004c00 - 0xd0004cff (0x100) MX[B] >> [2] -1 0 0xd0004800 - 0xd00048ff (0x100) MX[B] >> [3] -1 0 0xd0000000 - 0xd0003fff (0x4000) MX[B] >> [4] -1 0 0xd0004000 - 0xd00047ff (0x800) MX[B] >> > === message truncated === > > > __________________________________ > Do you Yahoo!? > Free Pop-Up Blocker - Get it now > http://companion.yahoo.com/ > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 --------------------------------------------------- |\/\/\___/\/\/| Carol Anne Corner & \____ o o ____/ Thomas Corner tacorner@xxxxxxxxx ) ( 04-Dec-2003 20:40:50 Vienna, Austria ( * * ) mailer: xfmail \___/ Web Page: www.corner.chello.at --------------------------------------------------- _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
