Your expectation about ABI error was good. I try to use 20031124 DRI snapshot but since it is compiled for XFree 4.3.99, I got ABI error.
Unfortunately I found no archive of old DRI snapshot. I think I will compile XFreee 4.4 when it will be released. Unless there is some XFree 4.3.99 binaries somewhere.
Jean-Pierre
Alex Deucher wrote:
The drivers Alan provides are based on CVS, not 4.3.0. Since you are using straight 4.3.0, you will need the fixes that have been applied to cvs. you eaither need to grab Alan's binaries again, another snapshot like the DRI snapshots, or compile X from cvs.
DRI snapshots: http://dri.sourceforge.net/snapshots/
For both Alan's and the DRI snaps, make sure you grab the XFree86 package as well or you will get ABI errors.
Alex
---------------------------
Hi,
I have an ATI AIW 9000 Pro (Radeon) and Apple 20'' Cinema Display. I
had some difficulties to configure them for Red Hat 9 but it was working with Radeon drivers downloaded on 2003-05-03 from http://www.xfree86.org/~alanh/drivers/x86/.
Now I have just installed Mandrake 9.2 which has XFree 4.3 also. But mode 1680x1050 seems to be no more supported by radeon driver :
--- XF86Config
Section "Monitor"
Identifier "Apple20"
VendorName "Apple"
ModelName "20'' Apple Cinema Display"
HorizSync 31.0 - 100.0
VertRefresh 58.0 - 100.0
ModeLine "1680x1050_60.00" 147.1 1680 1784 1968 2256 1050 1051
1054 1087 -hsync +vsync
Option "dpms"
EndSection
---
--- XFree86.log (WW) RADEON(0): Mode 1680x1050_60.00 is out of range. (WW) RADEON(0): Valid modes must be between 320x200-1600x1200 ---
__________________________________ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
_______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
