The Trident driver doesn't currently support this mode. Sorry. Alan. On Tue, Nov 18, 2003 at 02:35:40PM +0100, Fabio Sirna wrote: > Hi All, > I've an Acer Travelmate 210 TXR with a Trident Cyberblade chipset graphic card. > If I work on Windows, I can use 2 monitor with a large desktop > (like Xinerama). > Now, I try to settings the Xinerama on Linux and Xfree 4.3 (my > distribution is Debian unstable). > > I see in the documention this Option: > > Option "Display" "string" Override the display. Possible values > are "CRT", "LCD" and "Dual". Please note that this option is only > experimentally. Default: Use display active when X started. > > I try tu use it, but I don't understand how it works. > > My Xf86Config is (I cut the section that have non interesting > for the question): > > Section "Device" > Identifier "Trident_1" > Driver "trident" > BusID "PCI:1:0:0" > Option "UseFBDev" "true" > Option "VideoRAM" "8192" > Option "SWCursor" "true" > Option "CyberStretch" "true" > Option "CyberShadow" "true" > Option "ShadowFB" "true" > Screen 0 > Option "Display" "Dual" > #Option "NoAccel" "false" > #Option "VideoKey" "integer" > #Option "XvHsync" "integer" > #Option "XvVsync" "integer" > #Option "XvRskew" "integer" > EndSection > > Section "Device" > Identifier "Trident_2" > Driver "trident" > BusID "PCI:1:0:0" > Screen 1 > Option "Display" "CRT" > #Option "NoAccel" "false" > #Option "VideoKey" "integer" > #Option "XvHsync" "integer" > #Option "XvVsync" "integer" > #Option "XvRskew" "integer" > EndSection > > Section "Monitor" > Identifier "FlatPanel" > HorizSync 31.5-60 > VertRefresh 60 > Option "DPMS" > EndSection > > Section "Monitor" > Identifier "Hantarex" > HorizSync 28-60 > VertRefresh 40-70 > Option "DPMS" > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "Trident_1" > Monitor "FlatPanel" > DefaultDepth 24 > SubSection "Display" > Depth 24 > Modes "1024x768" > EndSubSection > EndSection > > Section "Screen" > Identifier "External Screen" > Device "Trident_1" > Monitor "Hantarex" > DefaultDepth 8 > SubSection "Display" > Depth 8 > Modes "640x480" > EndSubSection > EndSection > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > Screen "External Screen" RightOf "Default Screen" > InputDevice "Tastiera" "CoreKeyboard" > #InputDevice "Trust" "CorePointer" > InputDevice "Touchpad" "CorePointer" > InputDevice "WacomCursor" "SendCoreEvents" > InputDevice "WacomStylus" "SendCoreEvents" > InputDevice "WacomEraser" "SendCoreEvents" > EndSection > > The lspci -vvvv output is: > > 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 > (rev 5d) (prog-if 00 [VGA]) Subsystem: Acer Incorporated [ALI]: > Unknown device 1019 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- > FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- > <PERR- Latency: 32 > > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at 80800000 (32-bit, non-prefetchable) [size=8M] > Region 1: Memory at 80100000 (32-bit, non-prefetchable) [size=128K] > Region 2: Memory at 81000000 (32-bit, non-prefetchable) [size=8M] > Expansion ROM at 80120000 [disabled] [size=64K] > Capabilities: [80] AGP version 1.0 > > Status: RQ=33 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2 > Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> > Capabilities: [90] Power Management version 1 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > I use the latest developer driver: > -rw-r--r-- 1 root root 130868 2003-04-28 11:30 trident_drv.o > > Thanks in advance if someone can help me. > > -- > Fabio > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
