Re: [XFree86] DVI output with nVidia and xfree 4.3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mark,

It's great to hear that I should be able to get the nv driver working!
I've made a big step of progress, I can now start up X well enough using
the nv driver, but I can't seem to be able to get a resolution higher than
 1024x786. Ideally, I would like to be able to use 1280x1024, the
monitor's native resolution.

I've posted the relevant files online, as I didn't know if the list server
stripped attachments, and I didn't want to put the contents in the body
of the message.

So, here they are:

http://chb.orangekids.net/XFree86.0.log
http://chb.orangekids.net/XF86Config

Thanks in advance for any advice!

Colin
cbortner@xxxxxxxxxxxxxxxxxx

On Tue, 28 Oct 2003, Mark Vojkovich wrote:

>
>    We can't support NVIDIA's binary drivers but we can support the
> "nv" driver.  The "nv" driver in 4.3.0 should work fine with DVI on
> GeForce3 Ti500.  The CrtcNumber option isn't used on the GeForce3
> as that option is only for dual-head cards.  I'll need to see
> the /var/log/XFree86.0.log when running the "nv" driver to diagnose
> why it's not working.
>
>
> 			Mark.
>
>
> On Tue, 28 Oct 2003, Colin Hyatt Bortner wrote:
>
> > Hello,
> >
> > I've been having problems with my new monitor, a Samsung SyncMaster 172T,
> > on the DVI output of my nVidia GeForce 3 Ti500 with xfree86 4.3.0.  The
> > monitor has duel inputs, analog and digital, but I'd like to, if
> > possible, use the DVI input.
> >
> > It functions adequately using the vesa driver, limited to 1024x786.  I'd
> >  like to be able to use nVidia's binary driver, nvidia, or at least the
> > nv driver.
> >
> > When I try to use the nv driver, the screen will go blank and flash
> > slightly, eventually the led on the LCD will begin to flash, and I have to
> > press Ctrl+Alt+BackSpace to drop out of X.  Similar behavior is observed
> > using the nvidia driver.
> >
> > I've been looking around for advice, including this list's archives, and
> > have integrated that advice into my XFree86Config file.  I've attached it,
> > with the added/modified lines highlighted.  None of them have seemed to
> > made an impact on this particular problem however.
> >
> > On the Samsung website, the horizontal sync range for 'digital' is 30-63
> > and the vertical sync range is 56-75.
> >
> > >>SNIP>>
> >
> > Section "Module"
> >     Load        "dbe"
> >     SubSection  "extmod"
> >       Option    "omit xfree86-dga"
> >     EndSubSection
> >     Load        "type1"
> >     Load        "speedo"
> >     Load       "glx"
> > EndSection
> > Section "Files"
> >     RgbPath     "/usr/X11R6/lib/X11/rgb"
> >     FontPath   "/usr/X11R6/lib/X11/fonts/local/"
> >     FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
> >     FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
> >     FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
> >     FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
> >     FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
> >     FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
> >     FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
> > EndSection
> > Section "ServerFlags"
> > EndSection
> > Section "InputDevice"
> >     Identifier  "Keyboard1"
> >     Driver      "Keyboard"
> >     Option "AutoRepeat" "500 30"
> >     Option "XkbRules"   "xfree86"
> >     Option "XkbModel"   "pc101"
> >     Option "XkbLayout"  "us"
> > EndSection
> > Section "InputDevice"
> >     Identifier  "Mouse1"
> >     Driver      "mouse"
> >     Option "Protocol"    "IMPS/2"
> >     Option "Device"      "/dev/input/mice"
> >     Option "ZAxisMapping" "4 5"
> > EndSection
> > Section "Monitor"
> >     Identifier  "Samsung SyncMaster 172T"
> >     HorizSync 30-63
> >     VertRefresh 56-75
> > EndSection
> > Section "Device"
> >     Identifier  "Standard VGA"
> >     VendorName  "Unknown"
> >     BoardName   "Unknown"
> >     Driver     "vga"
> > EndSection
> > Section "Device"
> >     Identifier  "nVidia GeForce 3 Ti500"
> >     Driver      "nvidia"
> >     Option      "FlatPanel" <-- ADDED
> >     Option "CrtcNumber" "1" <-- ADDED
> > EndSection
> > Section "Screen"
> >     Identifier  "Screen 1"
> >     Device      "nVidia GeForce 3 Ti500"
> >     Monitor     "Samsung SyncMaster 172T"
> >     DefaultDepth 24
> >     Subsection "Display"
> >         Depth       8
> >         Modes       "1024x768" "800x600" "640x480"
> >         ViewPort    0 0
> >     EndSubsection
> >     Subsection "Display"
> >         Depth       16
> >         Modes       "1024x768" "800x600" "640x480"
> >         ViewPort    0 0
> >     EndSubsection
> >     Subsection "Display"
> >         Depth       24
> >         Modes       "1280x1024" "1024x768" "800x600" "640x480"
> >         ViewPort    0 0
> >     EndSubsection
> > EndSection
> > Section "ServerLayout"
> >     Identifier  "Simple Layout"
> >     Screen "Screen 1"
> >     InputDevice "Mouse1" "CorePointer"
> >     InputDevice "Keyboard1" "CoreKeyboard"
> > EndSection
> >
> > <<SNIP<<
> >
> > If the log would also be helpful, I will gladly send that as well.
> >
> > Thank you very much!
> >
> > Regards,
> >
> > Colin
> > cbortner@xxxxxxxxxxxxxxxxxx
> > _______________________________________________
> > XFree86 mailing list
> > XFree86@xxxxxxxxxxx
> > http://XFree86.Org/mailman/listinfo/xfree86
> >
>
> _______________________________________________
> XFree86 mailing list
> XFree86@xxxxxxxxxxx
> http://XFree86.Org/mailman/listinfo/xfree86
>
_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86

[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux