Re: [XFree86] glxgears and high pitch tone

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 14 Oct 2003, Andreas Kotowicz wrote:

> On Tue, 2003-10-14 at 00:36, Ian Romanick wrote:
> 
> > Does it still make the sound if you run an external monitor instead of 
> > the built-in LCD?  
> 
> didn't try it out yet.
> 
> > My guess is that it has something to do with the 
> > frame rate being much, much higher than the refresh rate.  That would 
> > explain with it does it with gears (which probably runs at hundreds of 
> > frame per second) and not tuxracer.  My best guess is that it's the 
> > display itself that's making the noise.  Try setting the 
> 
> the noise comes from the display. I'm pretty sure about that.
> 
> > 'LIBGL_THROTTLE_REFRESH' environment variable (to any value) and re-run 
> > gears.  That will sync the frame rate to the refresh rate.
> 
> setting this variable I hear no more noise. so it's actually the built
> in LCD that can't refresh as fast as 800FPS and is therefore emitting
> this sound. so this is a design issue but not a hardware failure, is it?

   I expect it's just a strange electrical phenomenon like a
60 or 50 Hz buzz that some AC appliances emit.  Only this one
is at a frequency related to some data transfered to the panel.
Maybe it's a harmonic of the FPS.

			Mark.


_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86

[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux