[XFree86] startx crash

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

Hi I have been trying to get Xfree86 to work on a Dell dimension XPS T660 for a few days now.... I tried installing it through FreeBSD 4.8 first and that didnt work. So then I tried installing it through FreeBSD 5.1 that didnt work either and the same error came up. With both installations I'm pretty sure that I did the post configuration correctly, since I have installed both version on other computers with no problems, In the XFree86 config menu I correctly set my mouse, keyboard, card, screen etc... I even tried using different variations, still no luck. The error I get when i try "startx" is "Fatal Screen Error No screen found" I even went into /etc/X11/XFree86 config file to take a look at the parameters and they all seem fine. I am using a dell m990 screen and for the video card i have a riva tnt2 ultra.... or thats at least what it says on the bios screen. Attached is the log of XFree86 from my last attempt.

Here is my config File:

# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xf86config:
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
        Identifier     "Simple Layout"
        InputDevice    "Mouse1" "CorePointer"
        InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the Type1 and FreeType font modules
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "speedo"
# Load "freetype"
EndSection

Section "InputDevice"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
#    Option     "Protocol"      "Xqueue"
#    Option     "Xleds"      "1 2 3"
#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"
# These are the default XKB settings for XFree86
#    Option "XkbRules"    "xfree86"
#    Option "XkbModel"    "pc101"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""
#    Option "XkbDisable"
        Identifier  "Keyboard1"
        Driver      "Keyboard"
        Option      "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
        Option      "XkbRules" "xfree86"
        Option      "XkbModel" "dell101"
        Option      "XkbLayout" "us"
EndSection

Section "InputDevice"

# Identifier and driver
#    Option "Resolution"        "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
#    Option "Protocol"  "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate"  "9600"
#    Option "SampleRate"        "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
        Identifier  "Mouse1"
        Driver      "mouse"
        Option      "Protocol" "Auto"
        Option      "Device" "/dev/sysmouse"
# Mouse-speed setting for PS/2 mouse.
        Option      "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option      "XkbModel" "dell"
        Option      "XkbLayout" "us"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        HorizSync    31.5 - 35.1
        VertRefresh  50.0 - 90.0
EndSection

Section "Device"
        Identifier  "Card1"
        Driver      "nv"
        ChipSet     "RIVA TNT2 Ultra"
        Card        "nv RIVA TNT2 Ultra"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card1"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Depth     16
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     24
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection


Here is the log file from the last session:



XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 5.1 i386 [ELF]
Build Date: 24 May 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Oct 1 15:49:51 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "dell101"
(**) XKB: model: "dell101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:un
scaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/ fonts/Speedo/,/usr/
X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/ lib/X11/fonts/100
dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:0e:0: chip 1102,0002 card 1102,8022 rev 07 class 04,01,00 hdr 80
(II) PCI: 00:0e:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00 hdr 80
(II) PCI: 00:0f:0: chip 105a,4d38 card 105a,4d33 rev 01 class 01,80,00 hdr 00
(II) PCI: 00:10:0: chip 1317,0985 card 1317,0570 rev 11 class 02,00,00 hdr 00
(II) PCI: 00:11:0: chip 10d9,0531 card 0000,0000 rev 25 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0028 card 1092,5a02 rev 11 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] rev 17, Mem @ 0xd1000000/
24, 0xf0000000/25
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xffffffff to 0xdfffffff
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to 0xd0ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd0020400 - 0xd00207ff (0x400) MX[B]E
[1] -1 0 0xd0020000 - 0xd003ffff (0x20000) MX[B]E
[2] -1 0 0xd0000000 - 0xd0ffffff (0x1000000) MX[B]E
[3] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[4] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B](B)
[5] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[6] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[7] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
[8] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]E
[9] -1 0 0x00001898 - 0x0000189f (0x8) IX[B]E
[10] -1 0 0x000018a0 - 0x000018bf (0x20) IX[B]E
[11] -1 0 0x0000189c - 0x0000189f (0x4) IX[B]E
[12] -1 0 0x000018a8 - 0x000018af (0x8) IX[B]E
[13] -1 0 0x00001890 - 0x0000189f (0x10) IX[B]E
[14] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[15] -1 0 0x00001840 - 0x0000187f (0x40) IX[B]E
[16] -1 0 0x00001880 - 0x000018ff (0x80) IX[B]E
(II) PCI Memory resource overlap reduced 0xd0020000 from 0xd003ffff to 0xd00203ff
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd0ffffff to 0xd001ffff
(II) PCI I/O resource overlap reduced 0x00001800 from 0x000018ff to 0x0000183f
(II) PCI I/O resource overlap reduced 0x00001898 from 0x0000189f to 0x0000189b
(II) PCI I/O resource overlap reduced 0x000018a0 from 0x000018bf to 0x000018a7
(II) PCI I/O resource overlap reduced 0x00001890 from 0x0000189f to 0x00001897
(II) PCI I/O resource overlap reduced 0x00001840 from 0x0000187f to 0x0000185f
(II) PCI I/O resource overlap reduced 0x00001880 from 0x000018ff to 0x0000188f
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd0020400 - 0xd00207ff (0x400) MX[B]E
[1] -1 0 0xd0020000 - 0xd00203ff (0x400) MX[B]E
[2] -1 0 0xd0000000 - 0xd001ffff (0x20000) MX[B]E
[3] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[4] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B](B)
[5] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[6] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[7] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
[8] -1 0 0x00001800 - 0x0000183f (0x40) IX[B]E
[9] -1 0 0x00001898 - 0x0000189b (0x4) IX[B]E
[10] -1 0 0x000018a0 - 0x000018a7 (0x8) IX[B]E
[11] -1 0 0x0000189c - 0x0000189f (0x4) IX[B]E
[12] -1 0 0x000018a8 - 0x000018af (0x8) IX[B]E
[13] -1 0 0x00001890 - 0x00001897 (0x8) IX[B]E
[14] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[15] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]E
[16] -1 0 0x00001880 - 0x0000188f (0x10) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0020400 - 0xd00207ff (0x400) MX[B]E
[6] -1 0 0xd0020000 - 0xd00203ff (0x400) MX[B]E
[7] -1 0 0xd0000000 - 0xd001ffff (0x20000) MX[B]E
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]EO
[9] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX[B](B)
[10] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]E
[14] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]E
[15] -1 0 0x00001800 - 0x0000183f (0x40) IX[B]E
[16] -1 0 0x00001898 - 0x0000189b (0x4) IX[B]E
[17] -1 0 0x000018a0 - 0x000018a7 (0x8) IX[B]E
[18] -1 0 0x0000189c - 0x0000189f (0x4) IX[B]E
[19] -1 0 0x000018a8 - 0x000018af (0x8) IX[B]E
[20] -1 0 0x00001890 - 0x00001897 (0x8) IX[B]E
[21] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]E
[22] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]E
[23] -1 0 0x00001880 - 0x0000188f (0x10) IX[B]E
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(EE) No drivers available.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xxxxxxxxxxxx


Thanks you

_______________________________________________
XFree86 mailing list
XFree86@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/xfree86
[Index of Archives]     [X Forum]     [Xorg]     [XFree86 Newbie]     [IETF Announce]     [Security]     [Font Config]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux Kernel]

  Powered by Linux