Hi!
I got some Fujitsu-Siemens Amilo D PIII 1.2GHz
with a S3 Twister Chipset. I tried to configure X11,
here's the XFree86 -configure output:
Fatal server error:
XFree86 has found a valid card configuration.
Unfortunately the appropriate data has not been added to xf86PciInfo.h.
Please forward 'scanpci -v' output to XFree86 support team.
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xxxxxxxxxxxx
I also tried configuring a VESA framebuffer server and that
runs, but crashes while exiting or switching to a virtual console.
the most annoying thing is, the whole machine freezes and then
can only being powered off hardly by the power-button.
I attached some important information. Hope, that's enough for you.
greets, phil
--
+++ GMX - die erste Adresse für Mail, Message, More! +++
Getestet von Stiftung Warentest: GMX FreeMail (GUT), GMX ProMail (GUT)
(Heft 9/03 - 23 e-mail-Tarife: 6 gut, 12 befriedigend, 5 ausreichend)
Jetzt selbst kostenlos testen: http://www.gmx.net
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #1: Tue Sep 16 12:49:09 CEST 2003
root@xxxxxxxxxxxxxxxxx:/usr/src/sys/i386/compile/OWNKERN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04ba000.
Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc04ba0a8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04ba15c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04ba208.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1193691444 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1193.69-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 234881024 (224 MB)
avail memory = 222978048 (212 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
VESA: v2.0, 31680k memory, flags:0x1, mode table:0xc03d2ee2 (1000022)
VESA: S3 Incorporated. Twister BIOS
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 8 entries at 0xc00fdf40
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <O2Micro OZ6833 PCI-CardBus Bridge> at device 4.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 4 INTA is routed to irq 10
cbb1: <O2Micro OZ6833 PCI-CardBus Bridge> at device 4.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: slot 4 INTB is routed to irq 11
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0x1000-0x100f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x1020-0x103f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isab1: <PCI-ISA bridge> at device 7.4 on pci0
pcm0: <VIA VT82C686A> port 0x1010-0x1013,0x1014-0x1017,0x1400-0x14ff irq 5 at device 7.5 on pci0
pci0: <serial bus, FireWire> at device 13.0 (no driver attached)
pci0: <simple comms> at device 16.0 (no driver attached)
dc0: <Accton EN2242 MiniPCI 10/100BaseTX> port 0x1c00-0x1cff mem 0xe8004c00-0xe8004fff irq 11 at device 17.0 on pci0
dc0: Ethernet address: 00:90:96:1f:2b:c8
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
orm0: <Option ROMs> at iomem 0xe4000-0xe7fff,0xcc000-0xcdfff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
ad0: 19077MB <IC25N020ATDA04-0> [38760/16/63] at ata0-master UDMA100
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2502> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x1106 device 0x0605
VIA Device unknown
CardVendor 0x14c0 card 0x0012 (Card unknown)
STATUS 0xa210 COMMAND 0x0006
CLASS 0x06 0x00 0x00 REVISION 0x00
BIST 0x00 HEADER 0x00 LATENCY 0x08 CACHE 0x00
BASE0 0xec000008 addr 0xec000000 MEM PREFETCHABLE
pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x1106 device 0x8605
VIA Device unknown
STATUS 0x2230 COMMAND 0x0007
CLASS 0x06 0x04 0x00 REVISION 0x00
HEADER 0x01 LATENCY 0x00
PRIBUS 0x00 SECBUS 0x01 SUBBUS 0x01 SECLT 0x00
IOBASE 0xf000 IOLIM 0xfff SECSTATUS 0x2230
NOPREFETCH_MEMBASE 0xe8100000 MEMLIM 0xe81fffff
PREFETCH_MEMBASE 0xf0000000 MEMLIM 0xf7ffffff
NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT VGA_EN ISA_EN NO_SERR_EN NO_PERR_EN
pci bus 0x0000 cardnum 0x04 function 0x00: vendor 0x1217 device 0x6933
Device unknown
STATUS 0x0410 COMMAND 0x0007
CLASS 0x06 0x07 0x00 REVISION 0x01
BIST 0x00 HEADER 0x82 LATENCY 0x20 CACHE 0x00
BASE0 0x88000000 addr 0x88000000 MEM
BASE1 0x020000a0 addr 0x020000a0 MEM
BASE2 0x20000000 addr 0x20000000 MEM
BASE3 0xfffff000 addr 0xfffff000 MEM
BASE5 0xfffff000 addr 0xfffff000 MEM
BASEROM 0x00000001 addr 0x00000000 decode-enabled
MAX_LAT 0x04 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0a
BYTE_0 0x1214c0 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x04 function 0x01: vendor 0x1217 device 0x6933
Device unknown
STATUS 0x0410 COMMAND 0x0007
CLASS 0x06 0x07 0x00 REVISION 0x01
BIST 0x00 HEADER 0x82 LATENCY 0x20 CACHE 0x00
BASE0 0x88001000 addr 0x88001000 MEM
BASE1 0x020000a0 addr 0x020000a0 MEM
BASE2 0x20000000 addr 0x20000000 MEM
BASE3 0xfffff000 addr 0xfffff000 MEM
BASE5 0xfffff000 addr 0xfffff000 MEM
BASEROM 0x00000001 addr 0x00000000 decode-enabled
MAX_LAT 0x04 MIN_GNT 0x00 INT_PIN 0x02 INT_LINE 0x0b
BYTE_0 0x1214c0 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x07 function 0x00: vendor 0x1106 device 0x0686
VIA VT 82C686 MVP4 ISA Bridge
CardVendor 0x14c0 card 0x0012 (Card unknown)
STATUS 0x0210 COMMAND 0x0087
CLASS 0x06 0x01 0x00 REVISION 0x42
BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x00
BYTE_0 0xd0000108 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x07 function 0x01: vendor 0x1106 device 0x0571
VIA VT 82C586 MVP3 IDE Bridge
CardVendor 0x14c0 card 0x0012 (Card unknown)
STATUS 0x0290 COMMAND 0x0005
CLASS 0x01 0x01 0x8a REVISION 0x06
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE4 0x00001001 addr 0x00001000 I/O
BYTE_0 0x3a09f20b BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x07 function 0x02: vendor 0x1106 device 0x3038
VIA VT 82C586 MVP3 USB Controller
CardVendor 0x14c0 card 0x0012 (Card unknown)
STATUS 0x0210 COMMAND 0x0011
CLASS 0x0c 0x03 0x00 REVISION 0x1a
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x08
BASE4 0x00001021 addr 0x00001020 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x04 INT_LINE 0x0b
BYTE_0 0x31200 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x07 function 0x04: vendor 0x1106 device 0x3057
VIA VT 8501 MVP4 ACPI Bridge
CardVendor 0x14c0 card 0x0012 (Card unknown)
STATUS 0x0290 COMMAND 0x0000
CLASS 0x06 0x01 0x00 REVISION 0x40
BYTE_0 0x598400 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x07 function 0x05: vendor 0x1106 device 0x3058
VIA VT 8501 MVP4 MultiMedia
CardVendor 0x14c0 card 0x0012 (Card unknown)
STATUS 0x0210 COMMAND 0x0001
CLASS 0x04 0x01 0x00 REVISION 0x50
BASE0 0x00001401 addr 0x00001400 I/O
BASE1 0x00001015 addr 0x00001014 I/O
BASE2 0x00001011 addr 0x00001010 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x03 INT_LINE 0x05
BYTE_0 0x1c00cc01 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x0d function 0x00: vendor 0x104c device 0x8023
Texas Instruments Device unknown
CardVendor 0x14c0 card 0x0012 (Card unknown)
STATUS 0x0210 COMMAND 0x0012
CLASS 0x0c 0x00 0x10 REVISION 0x00
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x08
BASE0 0xe8004000 addr 0xe8004000 MEM
BASE1 0xe8000000 addr 0xe8000000 MEM
MAX_LAT 0x04 MIN_GNT 0x02 INT_PIN 0x01 INT_LINE 0x05
pci bus 0x0000 cardnum 0x10 function 0x00: vendor 0x11c1 device 0x0450
Device unknown
CardVendor 0x144f card 0x4005 (Card unknown)
STATUS 0x0290 COMMAND 0x0003
CLASS 0x07 0x80 0x00 REVISION 0x00
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE0 0xe8004800 addr 0xe8004800 MEM
BASE1 0x00001019 addr 0x00001018 I/O
BASE2 0x00001801 addr 0x00001800 I/O
MAX_LAT 0x0e MIN_GNT 0xfc INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0xffffffff BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x11 function 0x00: vendor 0x1113 device 0x1216
Device unknown
CardVendor 0x1113 card 0x2242 (Card unknown)
STATUS 0x0290 COMMAND 0x0017
CLASS 0x02 0x00 0x00 REVISION 0x11
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x08
BASE0 0x00001c01 addr 0x00001c00 I/O
BASE1 0xe8004c00 addr 0xe8004c00 MEM
MAX_LAT 0xff MIN_GNT 0xff INT_PIN 0x01 INT_LINE 0x0b
pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x5333 device 0x8d01
S3 Device unknown
CardVendor 0x14c0 card 0x0012 (Card unknown)
STATUS 0x0230 COMMAND 0x0007
CLASS 0x03 0x00 0x00 REVISION 0x02
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x08
BASE0 0xe8100000 addr 0xe8100000 MEM
BASE1 0xf0000008 addr 0xf0000000 MEM PREFETCHABLE
MAX_LAT 0xff MIN_GNT 0x04 INT_PIN 0x01 INT_LINE 0x0a
BYTE_0 0x03 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
FreeBSD Satellite.nWl.net 5.0-RELEASE FreeBSD 5.0-RELEASE #1: Tue Sep 16 12:49:09 CEST 2003 root@xxxxxxxxxxxxxxxxx:/usr/src/sys/i386/compile/OWNKERN i386
Section "Files"
EndSection
Section "Module"
Load "xie"
Load "pex5"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "extmod"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "MouseSystems"
Option "Emulate3Buttons"
Option "Device" "/dev/sysmouse"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc101"
Option "XkbLayout" "de"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 57.0
VertRefresh 50.0 - 90.0
EndSection
Section "Device"
Identifier "Card0"
Driver "fbdev"
ChipSet "fbdev"
Card "fbdev fbdev"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
EndSection
