On Tue, 2003-09-09 at 07:40, Peter Kozberski wrote: > I'm using NetBSD 1.5.2 and X 1.4.2. > > The PC is old but it's bios allows PnP/ISA detection. > > I'm using an IR Keyboard/mouse. The mouse is When you look at Error logs, look for (WW) and (EE): (II) CIRRUS(0): Primary V_BIOS segment is: 0xc000 (==) CIRRUS(0): Depth 8, (==) framebuffer bpp 8 [...snip...] This is an error: (EE) CIRRUS(0): I2C initialization failed (EE) CIRRUS(0): No valid MMIO address in PCI config space [....snip...] And this is suspicous: (**) CIRRUS(0): VideoRAM: 512 kByte (==) CIRRUS(0): Min pixel clock is 12 MHz (--) CIRRUS(0): Max pixel clock is 85 MHz ----- If you enter these EE lines into Google, there's lots of discussion. Also, a copy of your XF86Config as well as scanpci(1) and dmesg(8) output would be useful. -lava connected to the serial port. > > I am unable to boot an X session. > > The screen goes white and stops. > The mouse does not move. I've tried a serial > mouse with no change. The serial port works. > > I don't know if the problem is mouse or graphics > card. > The Log may help some but I'm confused: > > XFree86 Version 4.2.1 / X Window System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 3 September 2002 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/) > Build Operating System: NetBSD/i386 1.5.2 [ELF] The NetBSD Foundation, Inc. > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Sat Nov 9 18:33:08 2002 > (==) Using config file: "/root/XF86Config" > (==) ServerLayout "XFree86 Configured" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Card0" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Keyboard0" > (==) Keyboard: CustomKeycode disabled > (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (**) ModulePath set to "/usr/X11R6/lib/modules" > (--) Using pcvt driver (version 3.32) > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.5 > XFree86 XInput driver : 0.3 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.3 > (II) Loader running on netbsd > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 1039,5597 card 0000,0000 rev 02 class 06,00,00 hdr 00 > (II) PCI: 00:01:0: chip 1039,0008 card 0000,0000 rev 01 class 06,01,00 hdr 80 > (II) PCI: 00:01:1: chip 1039,5513 card 0000,0000 rev d0 class 01,01,8a hdr 80 > (II) PCI: 00:0d:0: chip 1073,000d card 1073,000d rev 03 class 04,01,00 hdr 00 > (II) PCI: 00:11:0: chip 1013,00a0 card 0000,0000 rev 48 class 03,00,00 hdr 00 > (II) PCI: End of PCI scan > (II) LoadModule: "scanpci" > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) UnloadModule: "scanpci" > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (II) Host-to-PCI bridge: > (II) PCI-to-ISA bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus -1: bridge is at (0:1:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus -1 I/O range: > (II) Bus -1 non-prefetchable memory range: > (II) Bus -1 prefetchable memory range: > (--) PCI:*(0:17:0) Cirrus Logic GD5430 rev 72, Mem @ 0xe0000000/24 > (II) Addressable bus resource ranges are > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Active PCI resource ranges: > [0] -1 0xe1000000 - 0xe1ffffff (0x1000000) MX[B]E > [1] -1 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B) > [2] -1 0x00004000 - 0x000040ff (0x100) IX[B]E > [3] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [4] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [5] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [6] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0xe1000000 - 0xe1ffffff (0x1000000) MX[B]E > [1] -1 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B) > [2] -1 0x00004000 - 0x000040ff (0x100) IX[B]E > [3] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [4] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [5] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [6] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xe1000000 - 0xe1ffffff (0x1000000) MX[B]E > [6] -1 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B) > [7] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [8] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [9] -1 0x00004000 - 0x000040ff (0x100) IX[B]E > [10] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [11] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [12] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [13] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) LoadModule: "glx" > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a > (II) Module glx: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading sub module "GLcore" > (II) LoadModule: "GLcore" > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a > (II) Module GLcore: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension GLX > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "record" > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.13.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension RECORD > (II) LoadModule: "xtrap" > (II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a > (II) Module xtrap: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension DEC-XTRAP > (II) LoadModule: "speedo" > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a > (II) Module speedo: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Speedo > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "cirrus" > (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o > (II) Module cirrus: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.3 > (II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8, > CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD, > CL-GD5465, CL-GD7548 > (II) Primary Device is: PCI 00:11:0 > (**) Chipset override: clgd5430 > (**) Chipset CLGD5430 found > (II) Loading sub module "cirrus_alpine" > (II) LoadModule: "cirrus_alpine" > (II) Loading /usr/X11R6/lib/modules/drivers/cirrus_alpine.o > (II) Module cirrus_alpine: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xe1000000 - 0xe1ffffff (0x1000000) MX[B]E > [6] -1 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B) > [7] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [8] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [9] -1 0x00004000 - 0x000040ff (0x100) IX[B]E > [10] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [11] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [12] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [13] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > (II) resource ranges after probing: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xe1000000 - 0xe1ffffff (0x1000000) MX[B]E > [6] -1 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B) > [7] 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [8] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [9] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [11] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [12] -1 0x00004000 - 0x000040ff (0x100) IX[B]E > [13] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [14] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [15] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [16] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > [17] 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [18] 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) CIRRUS(0): initializing int10 > (II) CIRRUS(0): Primary V_BIOS segment is: 0xc000 > (==) CIRRUS(0): Depth 8, (==) framebuffer bpp 8 > (==) CIRRUS(0): Default visual is PseudoColor > (**) CIRRUS(0): Option "MMIO" > (==) CIRRUS(0): Using SW cursor > (--) CIRRUS(0): Linear framebuffer at 0xE0000000 > (EE) CIRRUS(0): No valid MMIO address in PCI config space > (--) CIRRUS(0): Not Using MMIO > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Loading /usr/X11R6/lib/modules/libi2c.a > (II) Module i2c: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.2.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (EE) CIRRUS(0): I2C initialization failed > (==) CIRRUS(0): Using gamma correction (1.0, 1.0, 1.0) > (**) CIRRUS(0): VideoRAM: 512 kByte > (==) CIRRUS(0): Min pixel clock is 12 MHz > (--) CIRRUS(0): Max pixel clock is 85 MHz > (II) CIRRUS(0): Monitor0: Using hsync range of 30.00-72.00 kHz > (II) CIRRUS(0): Monitor0: Using vrefresh range of 50.00-120.00 Hz > (II) CIRRUS(0): Clock range: 12.00 to 85.50 MHz > (II) CIRRUS(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1024x768" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1152x864" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1280x960" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1280x960" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1280x1024" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "896x672" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "896x672" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "928x696" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "928x696" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "960x720" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "960x720" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "1600x1024" (insufficient memory for mode) > (II) CIRRUS(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) > (II) CIRRUS(0): Not using default mode "800x600" (no mode of this name) > (--) CIRRUS(0): Virtual size is 640x480 (pitch 640) > (**) CIRRUS(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz > (II) CIRRUS(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync > (==) CIRRUS(0): DPI set to (75, 75) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.1 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.2.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B] > [1] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [2] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [3] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [4] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [5] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [6] -1 0xe1000000 - 0xe1ffffff (0x1000000) MX[B]E > [7] -1 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B) > [8] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) > [9] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) > [10] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) > [11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [12] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [13] -1 0x00004000 - 0x000040ff (0x100) IX[B]E > [14] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [15] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [16] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [17] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > [18] 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [19] 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (II) CIRRUS(0): Using 339 lines for offscreen memory > (II) CIRRUS(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > Solid Horizontal and Vertical Lines > (==) CIRRUS(0): Silken mouse enabled > (II) Setting vga for screen 0. > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension LBX > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (**) Option "Protocol" "wsmouse" > (**) Mouse0: Protocol: wsmouse > (**) Option "CorePointer" > (**) Mouse0: Core Pointer > (**) Option "Device" "/dev/wsmouse" > (==) Mouse0: Buttons: 3 > (II) Keyboard "Keyboard0" handled by legacy driver > (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) > > > -- Peter Kozberski, On*Q Computer Projects > > > > > > > > > _______________________________________________ > XFree86 mailing list > XFree86@xxxxxxxxxxx > http://XFree86.Org/mailman/listinfo/xfree86 -- l8*, -lava peace, love, UNIX(R) NOTE: When replying to a mailing list post, please be sure to reply to the /list/ and cc: or bcc: myself as I am unable to promise a timely response. _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
