On Tue, 2006-03-28 at 18:37 +0100, Barry Scott wrote: > I'm testing the i945G driving a Hitachi panel that has a preferred mode > of 1360x768@60Hz. > RC2 sets the refresh to 75Hz that is not allowed by the EDID. Attached > is the config created > by X -configure and the X log at logverbose 8. I use 915resolution to > set a slot tp 1360x768: > > 915resolution 58 1360 768 > > xrandr reports: > > SZ: Pixels Physical Refresh > *0 1360 x 768 ( 720mm x 406mm ) *75 > 1 1024 x 768 ( 720mm x 406mm ) 75 > 2 800 x 600 ( 720mm x 406mm ) 75 > 3 640 x 480 ( 720mm x 406mm ) 75 > Current rotation - normal > Current reflection - none > Rotations possible - normal > Reflections possible - none > > The panel reports 1024x768 75Hz > > Why isn't 60Hz being used? Is the any of the timing info from the EDID > being used? Quite possibly. What does the log say ? Alan. _______________________________________________ Devel@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/devel
