I'm testing the i945G driving a Hitachi panel that has a preferred mode
of 1360x768@60Hz.
RC2 sets the refresh to 75Hz that is not allowed by the EDID. Attached
is the config created
by X -configure and the X log at logverbose 8. I use 915resolution to
set a slot tp 1360x768:
915resolution 58 1360 768
xrandr reports:
SZ: Pixels Physical Refresh
*0 1360 x 768 ( 720mm x 406mm ) *75
1 1024 x 768 ( 720mm x 406mm ) 75
2 800 x 600 ( 720mm x 406mm ) 75
3 640 x 480 ( 720mm x 406mm ) 75
Current rotation - normal
Current reflection - none
Rotations possible - normal
Reflections possible - none
The panel reports 1024x768 75Hz
Why isn't 60Hz being used? Is the any of the timing info from the EDID
being used?
Barry
_______________________________________________
Devel@xxxxxxxxxxx
http://XFree86.Org/mailman/listinfo/devel
