OK, I must be an idiot or something. I cannot get X to work without frying
my PC. I am running OpenBSD 3.2 -stable on a Dell Optiplex GX1 with an ATI
Rage Pro video card and a KDS VS 21e monitor.
I ran XFree86 -configure and got this
trident
chips
atm
fbdev
i128
ati
i810
ark
cyrix
siliconmotion
vesa
vga
(++) using config file at /root/XF86Config.new
to test the server run XFree86 -xf86config /root/XF86Config.new
So I tested the server and then I get the following error:
_XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: server already running
Fatal Server Error
Cannot establish any listening sockets - Make sure an X server isn't already
running
Here is my /var/log/XFree86.0.log:
(--) checkDevMem: using aperture driver /dev/xf86
(--) Using wscons driver in pcvt compatibility mode (version 3.32)
(WW) xf86AcquireGART: AGPIOC_ACQUIRE failed (Device busy)
(WW) GARTInit: AGPIOC_INFO failed (Device not configured)
_XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: server already running
Fatal server error:
Cannot establish any listening sockets - Make sure an X server isn't already
running
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.
I did not reconfigure anything in rc.conf.
Any pointers or help would be appreciated. My dmesg file is at the end of
this post
TIA
Greg Canter
dmesg:
OpenBSD 3.2-stable (GENERIC) #0: Tue Dec 10 19:48:16 EST 2002
root@tyr.canwebdev:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 348 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 66699264 (65136K)
avail mem = 56315904 (54996K)
using 839 buffers containing 3436544 bytes (3356K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 05/11/98, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfc7f0/112 (5 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB PCI-ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage Pro" rev 0x5c
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 90640D4>
wd0: 16-sector PIO, LBA, 6149MB, 12495 cyl, 16 head, 63 sec, 12594960
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-6302B, 1017> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not configured
xl0 at pci0 dev 17 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 11
address 00:c0:4f:73:8a:54
exphy0 at xl0 phy 24: 3Com internal media interface
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
wss1 at isapnp0 "CS4236B, CSC0000, , WSS/SB" port 0x534/4,0x388/4,0x220/16
irq 5 drq 1,0: CS4236/CS4236B (vers 0)
audio0 at wss1
joy0 at isapnp0 "CS4236B, CSC000F, , Game" port 0x3a0/8
"CS4236B, CSC0010, , Ctrl" at isapnp0 port 0xf00/8 not configured
"CS4236B, CSC0003, , MPU" at isapnp0 port 0x330/2 not configured
biomask c840 netmask c840 ttymask d8c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
fd0: timeout (st0 20<seek_cmplt> cyl 0)
fd0: timeout (st0 20<seek_cmplt> cyl 0)
fd0a: soft error reading fsbn 0
_______________________________________________
Newbie@XFree86.Org
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
