I compiled xfree86-4.2.0 on Solaris8. and installed it. Then I tried to run "XFree86 -configure /etc/X11/XF86Config. Next my machine was freezing. are there anything wrong in my setting? I quote the log and XF86Config files below. I appreciate your any help! BTW, at first, I tryed to vesa driver. ========================= /var/log/XFree86.0.log ========================= XFree86 Version 4.2.0 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 18 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: SunOS 5.8 Generic_108529-13 i86pc Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 18 22:52:30 2002 (++) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "My Monitor" (**) | |-->Device "My Video Card" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "jp106" (**) XKB: model: "jp106" (**) Option "XkbLayout" "jp" (**) XKB: layout: "jp" (==) Keyboard: CustomKeycode disabled (==) FontPath set to "/usr/local/X11R6/lib/X11/fonts/misc/,/usr/local/X11R6/lib/X11/fonts/Speedo/,/usr/local/X11R6/lib/X11/fonts/Type1/,/usr/local/X11R6/lib/X11/fonts/CID/,/usr/local/X11R6/lib/X11/fonts/75dpi/,/usr/local/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/local/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/local/X11R6/lib/modules" (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on solaris (II) LoadModule: "bitmap" (II) Loading /usr/local/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/local/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8002403c, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,3575 card 104d,8100 rev 04 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,3577 card 104d,8100 rev 04 class 03,00,00 hdr 80 (II) PCI: 00:02:1: chip 8086,3577 card 104d,8100 rev 00 class 03,80,00 hdr 80 (II) PCI: 00:1d:0: chip 8086,2482 card 104d,8100 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,2484 card 104d,8100 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,2487 card 104d,8100 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 42 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,248a card 104d,8100 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,2483 card 104d,8100 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2485 card 104d,8100 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:1f:6: chip 8086,2486 card 104d,8100 rev 02 class 07,03,00 hdr 00 (II) PCI: 02:02:0: chip 104c,8023 card 104d,8100 rev 00 class 0c,00,10 hdr 00 (II) PCI: 02:05:0: chip 1180,0475 card 0000,0000 rev 80 class 06,07,00 hdr 02 (II) PCI: 02:08:0: chip 8086,1031 card 104d,8100 rev 42 class 02,00,00 hdr 00 (II) PCI: 02:0b:0: chip 104c,ac50 card 0000,0000 rev 01 class 06,07,00 hdr 02 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/local/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/local/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x04 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0x00003000 - 0x000030ff (0x100) IX[B] [1] -1 0x00003400 - 0x000034ff (0x100) IX[B] [2] -1 0x00003800 - 0x000038ff (0x100) IX[B] [3] -1 0x00003c00 - 0x00003cff (0x100) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0xe0200000 - 0xe02fffff (0x100000) MX[B] (II) Bus 2 prefetchable memory range: (II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(0:2:0) Intel i830M rev 4, Mem @ 0xe8000000/27, 0xe0000000/19 (--) PCI: (0:2:1) Intel i830M rev 0, Mem @ 0xf0000000/27, 0xe0080000/19 (II) Addressable bus resource ranges are [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0xe0204000 - 0xe0207fff (0x4000) MX[B]E [1] -1 0xe0200000 - 0xe03fffff (0x200000) MX[B]E [2] -1 0xe0205000 - 0xe0205fff (0x1000) MX[B]E [3] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E [4] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) [5] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [6] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) [7] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [8] -1 0x00003000 - 0x000030ff (0x100) IX[B]E [9] -1 0x00001880 - 0x000018ff (0x80) IX[B]E [10] -1 0x00001860 - 0x0000187f (0x20) IX[B]E [11] -1 0x00000374 - 0x00000377 (0x4) IX[B]E [12] -1 0x00000170 - 0x0000017f (0x10) IX[B]E [13] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E [14] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E [15] -1 0x00001840 - 0x0000187f (0x40) IX[B]E [16] -1 0x00001820 - 0x0000183f (0x20) IX[B]E [17] -1 0x00001800 - 0x000018ff (0x100) IX[B]E (II) Inactive PCI resource ranges: [0] -1 0x00002000 - 0x000020ff (0x100) IX[B]E [1] -1 0x00002400 - 0x000024ff (0x100) IX[B]E [2] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E [3] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E (II) PCI Memory resource overlap reduced 0xe0204000 from 0xe0207fff to 0xe0204fff (II) PCI Memory resource overlap reduced 0xe0200000 from 0xe03fffff to 0xe0203fff (II) PCI I/O resource overlap reduced 0x00001840 from 0x0000187f to 0x0000185f (II) PCI I/O resource overlap reduced 0x00001800 from 0x000018ff to 0x0000181f (II) Active PCI resource ranges after removing overlaps: [0] -1 0xe0204000 - 0xe0204fff (0x1000) MX[B]E [1] -1 0xe0200000 - 0xe0203fff (0x4000) MX[B]E [2] -1 0xe0205000 - 0xe0205fff (0x1000) MX[B]E [3] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E [4] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) [5] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [6] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) [7] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [8] -1 0x00003000 - 0x000030ff (0x100) IX[B]E [9] -1 0x00001880 - 0x000018ff (0x80) IX[B]E [10] -1 0x00001860 - 0x0000187f (0x20) IX[B]E [11] -1 0x00000374 - 0x00000377 (0x4) IX[B]E [12] -1 0x00000170 - 0x0000017f (0x10) IX[B]E [13] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E [14] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E [15] -1 0x00001840 - 0x0000185f (0x20) IX[B]E [16] -1 0x00001820 - 0x0000183f (0x20) IX[B]E [17] -1 0x00001800 - 0x0000181f (0x20) IX[B]E (II) Inactive PCI resource ranges after removing overlaps: [0] -1 0x00002000 - 0x000020ff (0x100) IX[B]E [1] -1 0x00002400 - 0x000024ff (0x100) IX[B]E [2] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E [3] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xe0204000 - 0xe0204fff (0x1000) MX[B]E [6] -1 0xe0200000 - 0xe0203fff (0x4000) MX[B]E [7] -1 0xe0205000 - 0xe0205fff (0x1000) MX[B]E [8] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E [9] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) [10] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [11] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) [12] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0x00003000 - 0x000030ff (0x100) IX[B]E [16] -1 0x00001880 - 0x000018ff (0x80) IX[B]E [17] -1 0x00001860 - 0x0000187f (0x20) IX[B]E [18] -1 0x00000374 - 0x00000377 (0x4) IX[B]E [19] -1 0x00000170 - 0x0000017f (0x10) IX[B]E [20] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E [21] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E [22] -1 0x00001840 - 0x0000185f (0x20) IX[B]E [23] -1 0x00001820 - 0x0000183f (0x20) IX[B]E [24] -1 0x00001800 - 0x0000181f (0x20) IX[B]E [25] -1 0x00002000 - 0x000020ff (0x100) IX[B]E [26] -1 0x00002400 - 0x000024ff (0x100) IX[B]E [27] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E [28] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E (II) LoadModule: "dbe" (II) Loading /usr/local/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/local/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) LoadModule: "type1" (II) Loading /usr/local/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "freetype" (II) Loading /usr/local/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.1.10 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font FreeType (II) LoadModule: "vesa" (II) Loading /usr/local/X11R6/lib/modules/drivers/vesa_drv.o (II) Module vesa: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "mouse" (II) Loading /usr/local/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.3 (II) VESA: driver for VESA chipsets: vesa (II) Primary Device is: PCI 00:02:0 (--) Chipset vesa found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xe0204000 - 0xe0204fff (0x1000) MX[B]E [6] -1 0xe0200000 - 0xe0203fff (0x4000) MX[B]E [7] -1 0xe0205000 - 0xe0205fff (0x1000) MX[B]E [8] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E [9] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) [10] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [11] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) [12] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0x00003000 - 0x000030ff (0x100) IX[B]E [16] -1 0x00001880 - 0x000018ff (0x80) IX[B]E [17] -1 0x00001860 - 0x0000187f (0x20) IX[B]E [18] -1 0x00000374 - 0x00000377 (0x4) IX[B]E [19] -1 0x00000170 - 0x0000017f (0x10) IX[B]E [20] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E [21] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E [22] -1 0x00001840 - 0x0000185f (0x20) IX[B]E [23] -1 0x00001820 - 0x0000183f (0x20) IX[B]E [24] -1 0x00001800 - 0x0000181f (0x20) IX[B]E [25] -1 0x00002000 - 0x000020ff (0x100) IX[B]E [26] -1 0x00002400 - 0x000024ff (0x100) IX[B]E [27] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E [28] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E (II) resource ranges after probing: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xe0204000 - 0xe0204fff (0x1000) MX[B]E [6] -1 0xe0200000 - 0xe0203fff (0x4000) MX[B]E [7] -1 0xe0205000 - 0xe0205fff (0x1000) MX[B]E [8] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E [9] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) [10] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [11] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) [12] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) [13] 0 0x000a0000 - 0x000affff (0x10000) MS[B] [14] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [15] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [16] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0x00003000 - 0x000030ff (0x100) IX[B]E [19] -1 0x00001880 - 0x000018ff (0x80) IX[B]E [20] -1 0x00001860 - 0x0000187f (0x20) IX[B]E [21] -1 0x00000374 - 0x00000377 (0x4) IX[B]E [22] -1 0x00000170 - 0x0000017f (0x10) IX[B]E [23] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E [24] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E [25] -1 0x00001840 - 0x0000185f (0x20) IX[B]E [26] -1 0x00001820 - 0x0000183f (0x20) IX[B]E [27] -1 0x00001800 - 0x0000181f (0x20) IX[B]E [28] -1 0x00002000 - 0x000020ff (0x100) IX[B]E [29] -1 0x00002400 - 0x000024ff (0x100) IX[B]E [30] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E [31] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E [32] 0 0x000003b0 - 0x000003bb (0xc) IS[B] [33] 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/local/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/local/X11R6/lib/modules/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) VESA(0): initializing int10 (WW) VESA(0): Bad V_BIOS checksum (II) VESA(0): Primary V_BIOS segment is: 0xc000 c000:01a2: 62 ILLEGAL X86 OPCODE! (II) VESA(0): VESA BIOS not detected (II) UnloadModule: "vesa" (II) UnloadModule: "int10" (II) Unloading /usr/local/X11R6/lib/modules/libint10.a (II) UnloadModule: "vbe" (II) Unloading /usr/local/X11R6/lib/modules/libvbe.a (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found =========================== /etc/X11/XF86Config =========================== # Section "Module" # This loads the DBE extension module. Load "dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" # This loads the GLX module # Load "glx" EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/local/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # # FontPath "/usr/X11R6/lib/X11/fonts/local/" # FontPath "/usr/X11R6/lib/X11/fonts/misc/" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/Type1/" # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" # FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. # Option "Dont Zoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbRules" "xfree86" # Option "XkbModel" "pc106" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "jp" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # Option "XkbRules" "xfree86" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Option "XkbRules" "xfree86" Option "XkbModel" "jp106" Option "XkbLayout" "jp" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "IntelliMouse" Option "Device" "/dev/kdmouse" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "MouseMan" # Option "Device" "/dev/mouse2" # EndSection # # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "My Monitor" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 30.0 - 70.0 # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 50-90 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: Section "Device" Identifier "Standard VGA" VendorName "Unknown" BoardName "Unknown" # The chipset line is optional in most cases. It can be used to override # the driver's chipset detection, and should not normally be specified. # Chipset "generic" # The Driver line must be present. When using run-time loadable driver # modules, this line instructs the server to load the specified driver # module. Even when not using loadable driver modules, this line # indicates which driver should interpret the information in this section. Driver "vga" # The BusID line is used to specify which of possibly multiple devices # this section is intended for. When this line isn't present, a device # section can only match up with the primary video device. For PCI # devices a line like the following could be used. This line should not # normally be included unless there is more than one video device # intalled. # BusID "PCI:0:10:0" # VideoRam 256 # Clocks 25.2 28.3 EndSection # Device configured by xf86config: Section "Device" Option "NoDDC" Identifier "My Video Card" Driver "vesa" # unsupported card #VideoRam 32768 VideoRam 16384 #Option "UseFBDev" "false" BusID "PCI:0:2:0" # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen 1" Device "My Video Card" Monitor "My Monitor" DefaultDepth 16 Subsection "Display" Depth 8 Modes "800x600" "1024x768" "1280x1024" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "800x600" "1024x768" "1280x1024" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "800x600" "1024x768" "1280x1024" ViewPort 0 0 EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Simple Layout" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. Screen "Screen 1" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection Eitarou Kamo _______________________________________________ Newbie@XFree86.Org *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
