Hi,
i have a toshiba laptop with nvidia geforce 2go chipset and would like
to use an external monitor and beamer. The combination of Fn + F5
switches the external monitor on and everything seems to be fine except
of the mouse pointer, which is gone. Actually the mouse is still
working, just the arrow is gone. When I switch back to my laptop display
there is an multicoloured square instead of the arrow.
With the closed source driver from Nvidia everything is working. But I
would prefer the original nv-driver.
What can I do? Thank you for your help.
Martin
This is a part of my /etc/X11/XF86config
...
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Device" "/dev/mouse"
Option "Emulate3Buttons" "on"
Option "Emulate3Timeout" "50"
Option "InputFashion" "Mouse"
Option "Name" "Autodetection"
Option "Protocol" "ps/2"
Option "Vendor" "Sysp"
EndSection
Section "Monitor"
Option "CalcAlgorithm" "CheckDesktopGeometry"
HorizSync 31-60
Identifier "Monitor[0]"
ModelName "1024X768@60HZ"
Option "DPMS"
VendorName "--> VESA"
VertRefresh 50-75
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1024x768" 66.29 1024 1040 1216 1400 768 768 777 802
Modeline "1024x768" 79.68 1024 1040 1216 1400 768 768 777 802
EndSection
Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "GeForce2 Go"
BusID "1:0:0"
Driver "nv"
Identifier "Device[0]"
Option "FlatPanel"
#Option "CrtcNumber" "0"
Screen 0
VendorName "NVidia"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
_______________________________________________
Newbie@XFree86.Org
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
