dear diamond stealth 64 lovers....
first some system specs:
i run mandrake 8.2 on an old world g3 ppc
xfree86-4.2.0 from the 4.2.0-10.3mdk package
the problem that i have is:
I want to get my second graphics adapter to work. a diamond stealth 64 vram:
S3 Inc. 86c968 [Vision 968 VRAM] rev 0 (rev 0)
I think i tracked the problem down to the fact that the s3 driver is absent
from my system. I looked around the net for the proper driver but came no
closer than XFree86-driver-s3-4.2.0-3.3.ppc.rpm
almost but not good enough since i need 4.2.0-10.3
i installed it anyway but X died with an error message
so maybe the driver is wrong ??
My other graphics card is a build in
ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] (rev 154)
i attached my xfree config file and the xfree log
thanks for any hints in the right direction
Thomas Geenen
XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-6mdk ppc [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Aug 11 17:55:56 2002
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "layout1"
(**) |-->Screen "screen0" (0)
(**) | |-->Monitor "Custom"
(**) | |-->Device "ATI Mach64 3D RAGE II"
(**) |-->Screen "screen1" (1)
(**) | |-->Monitor "Custom 17"
(**) | |-->Device "Stealth64"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "250 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:-1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1057,0002 card 0000,0000 rev 40 class 06,00,00 hdr 00
(II) PCI: 00:0d:0: chip 1000,000f card 0000,0000 rev 04 class 01,00,00 hdr 00
(II) PCI: 00:0e:0: chip 5333,88f0 card 0000,0000 rev 00 class 03,00,00 hdr 00
(II) PCI: 00:0f:0: chip 11ad,0002 card 128a,f001 rev 20 class 02,00,00 hdr 00
(II) PCI: 00:10:0: chip 106b,0010 card 0000,0000 rev 01 class ff,00,00 hdr 00
(II) PCI: 00:12:0: chip 1002,4754 card 0000,0000 rev 9a class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI: (0:14:0) S3 968 rev 0, Mem @ 0x84000000/26, BIOS @ 0x81810000/16
(--) PCI: (0:18:0) ATI Mach64 GT rev 154, Mem @ 0x82000000/24, 0x80000000/12, I/O @ 0x1000/8
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[3] -1 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xf3000000 - 0xf307ffff (0x80000) MX[B]
[1] -1 0x81800000 - 0x818000ff (0x100) MX[B]
[2] -1 0x81802000 - 0x81802fff (0x1000) MX[B]
[3] -1 0x81801000 - 0x818010ff (0x100) MX[B]
[4] -1 0x80000000 - 0x80000fff (0x1000) MX[B](B)
[5] -1 0x82000000 - 0x82ffffff (0x1000000) MX[B](B)
[6] -1 0x00000400 - 0x000004ff (0x100) IX[B]
[7] -1 0x00010000 - 0x000100ff (0x100) IX[B]
[8] -1 0x00001000 - 0x000010ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0x81810000 - 0x8181ffff (0x10000) MX[B](B)
[1] -1 0x84000000 - 0x87ffffff (0x4000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xf3000000 - 0xf307ffff (0x80000) MX[B]
[1] -1 0x81800000 - 0x818000ff (0x100) MX[B]
[2] -1 0x81802000 - 0x81802fff (0x1000) MX[B]
[3] -1 0x81801000 - 0x818010ff (0x100) MX[B]
[4] -1 0x80000000 - 0x80000fff (0x1000) MX[B](B)
[5] -1 0x82000000 - 0x82ffffff (0x1000000) MX[B](B)
[6] -1 0x00000400 - 0x000004ff (0x100) IX[B]
[7] -1 0x00010000 - 0x000100ff (0x100) IX[B]
[8] -1 0x00001000 - 0x000010ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0x81810000 - 0x8181ffff (0x10000) MX[B](B)
[1] -1 0x84000000 - 0x87ffffff (0x4000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[3] -1 0x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
[0] -1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0xf3000000 - 0xf307ffff (0x80000) MX[B]
[3] -1 0x81800000 - 0x818000ff (0x100) MX[B]
[4] -1 0x81802000 - 0x81802fff (0x1000) MX[B]
[5] -1 0x81801000 - 0x818010ff (0x100) MX[B]
[6] -1 0x80000000 - 0x80000fff (0x1000) MX[B](B)
[7] -1 0x82000000 - 0x82ffffff (0x1000000) MX[B](B)
[8] -1 0x81810000 - 0x8181ffff (0x10000) MX[B](B)
[9] -1 0x84000000 - 0x87ffffff (0x4000000) MX[B](B)
[10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0x00000000 - 0x00000000 (0x1) IX[B]
[12] -1 0x00000400 - 0x000004ff (0x100) IX[B]
[13] -1 0x00010000 - 0x000100ff (0x100) IX[B]
[14] -1 0x00001000 - 0x000010ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 6.4.7
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "s3"
(II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o
(II) Module s3: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.3.5
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) v4l driver for Video4Linux
(II) ATI: ATI driver (version 6.4.7) for chipsets: ati
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
ATI Radeon Mobility LZ (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 8500 BB (AGP), ATI Radeon 7500 QW (AGP)
(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968,
Trio32/64, Aurora64V+
(II) ATI: Candidate "Device" section "ATI Mach64 3D RAGE II".
(II) ATI: Shared PCI/AGP Mach64 in slot 0:18:0 detected.
(II) ATI: Shared PCI/AGP Mach64 in slot 0:18:0 assigned to active "Device" section "ATI Mach64 3D RAGE II".
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 6.4.7
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(--) Chipset 968 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0xf3000000 - 0xf307ffff (0x80000) MX[B]
[3] -1 0x81800000 - 0x818000ff (0x100) MX[B]
[4] -1 0x81802000 - 0x81802fff (0x1000) MX[B]
[5] -1 0x81801000 - 0x818010ff (0x100) MX[B]
[6] -1 0x80000000 - 0x80000fff (0x1000) MX[B](B)
[7] -1 0x82000000 - 0x82ffffff (0x1000000) MX[B](B)
[8] -1 0x81810000 - 0x8181ffff (0x10000) MX[B](B)
[9] -1 0x84000000 - 0x87ffffff (0x4000000) MX[B](B)
[10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0x00000000 - 0x00000000 (0x1) IX[B]
[12] -1 0x00000400 - 0x000004ff (0x100) IX[B]
[13] -1 0x00010000 - 0x000100ff (0x100) IX[B]
[14] -1 0x00001000 - 0x000010ff (0x100) IX[B](B)
(II) resource ranges after probing:
[0] -1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0xf3000000 - 0xf307ffff (0x80000) MX[B]
[3] -1 0x81800000 - 0x818000ff (0x100) MX[B]
[4] -1 0x81802000 - 0x81802fff (0x1000) MX[B]
[5] -1 0x81801000 - 0x818010ff (0x100) MX[B]
[6] -1 0x80000000 - 0x80000fff (0x1000) MX[B](B)
[7] -1 0x82000000 - 0x82ffffff (0x1000000) MX[B](B)
[8] -1 0x81810000 - 0x8181ffff (0x10000) MX[B](B)
[9] -1 0x84000000 - 0x87ffffff (0x4000000) MX[B](B)
[10] 1 0x000a0000 - 0x000affff (0x10000) MS[B]
[11] 1 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[12] 1 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0x00000000 - 0x00000000 (0x1) IX[B]
[15] -1 0x00000400 - 0x000004ff (0x100) IX[B]
[16] -1 0x00010000 - 0x000100ff (0x100) IX[B]
[17] -1 0x00001000 - 0x000010ff (0x100) IX[B](B)
[18] 1 0x000003b0 - 0x000003bb (0xc) IS[B]
[19] 1 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 1.
(==) ATI(0): Chipset: "ati".
(**) ATI(0): Depth 16, (--) framebuffer bpp 16
(--) ATI(0): ATI 3D Rage II graphics controller detected.
(--) ATI(0): Chip type 4754 "GT", version 2, foundry UMC, class 0, revision 0x02.
(--) ATI(0): PCI bus interface detected; block I/O base is 0x1000.
(--) ATI(0): ATI Mach64 adapter detected.
(!!) ATI(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 565
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(II) ATI(0): Storing hardware cursor image at 0x825FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0x82800000.
(!!) ATI(0): Virtual resolutions will be limited to 6143 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0x80000400.
(II) ATI(0): Using Block 1 MMIO aperture at 0x80000000.
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 6144 kB of SGRAM (1:1) detected (using 6143 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
(II) ATI(0): Custom: Using hsync range of 30.00-86.00 kHz
(II) ATI(0): Custom: Using vrefresh range of 48.00-150.00 Hz
(II) ATI(0): Maximum clock: 170.00 MHz
(II) ATI(0): Not using mode "800x600" (hsync out of range)
(II) ATI(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using mode "1280x1024" (hsync out of range)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "896x672" (hsync out of range)
(II) ATI(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "928x696" (hsync out of range)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "960x720" (hsync out of range)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "960x720" (hsync out of range)
(--) ATI(0): Virtual size is 1280x1024 (pitch 1280)
(**) ATI(0): Mode "1280x1024": 135.0 MHz, 81.1 kHz, 76.2 Hz
(II) ATI(0): Modeline "1280x1024" 135.00 1280 1288 1392 1664 1024 1027 1030 1064
(**) ATI(0): Mode "1152x768": 78.7 MHz, 54.7 kHz, 68.4 Hz
(II) ATI(0): Modeline "1152x768" 78.74 1152 1173 1269 1440 768 769 772 800 +vsync
(**) ATI(0): Mode "1024x768": 112.6 MHz, 79.3 kHz, 98.2 Hz
(II) ATI(0): Modeline "1024x768" 112.62 1024 1076 1248 1420 768 768 780 808 +hsync +vsync
(**) ATI(0): Mode "800x600": 62.4 MHz, 60.0 kHz, 94.9 Hz
(II) ATI(0): Modeline "800x600" 62.36 800 821 901 1040 600 601 604 632 +hsync +vsync
(**) ATI(0): Mode "640x480": 49.9 MHz, 60.0 kHz, 116.7 Hz
(II) ATI(0): Modeline "640x480" 49.89 640 661 725 832 480 481 484 514 +hsync +vsync
(==) ATI(0): DPI set to (75, 75)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
Fatal server error:
Caught signal 11. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/usbmouse"
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe"
# This loads the Video for Linux module.
Load "v4l"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Custom"
UseModes "Mac Modes"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-86
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 48-150
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Monitor"
Identifier "Custom 17"
UseModes "Mac Modes"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31-64
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-120
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Modes"
Identifier "Mac Modes"
# Apple iMac modes
Modeline "1024x768" 78.525 1024 1049 1145 1312 768 769 772 800 +hsync +vsync
Modeline "800x600" 62.357 800 821 901 1040 600 601 604 632 +hsync +vsync
Modeline "640x480" 49.886 640 661 725 832 480 481 484 514 +hsync +vsync
# Apple monitors tend to do 832x624
Modeline "832x624" 57 832 876 940 1152 624 625 628 667 -hsync -vsync
# Apple PowerBook G3
Modeline "800x600" 100 800 816 824 840 600 616 624 640 -hsync -vsync
# Apple TI Powerbook
Modeline "1152x768" 78.741 1152 1173 1269 1440 768 769 772 800 +vsync +vsync
# Pismo Firewire G3
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
# iBook2
Modeline "1024x768" 65 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 17" Apple Studio Display
Modeline "1024x768" 112.62 1024 1076 1248 1420 768 768 780 808 +hsync +vsync
# HiRes Apple Studio Display
Modeline "1280x1024" 135 1280 1288 1392 1664 1024 1027 1030 1064
# Another variation
Modeline "1280x1024" 134.989 1280 1317 1429 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Stealth64"
VendorName "Diamond Multimedia"
BoardName "Diamond Stealth 64 VRAM"
Driver "s3"
VideoRam 4096
# Ramdac "ti3026"
# Option "linear"
BusID "PCI:0:14:0"
EndSection
Section "Device"
Identifier "ATI Mach64 3D RAGE II"
VendorName "Unknown"
BoardName "Unknown"
Driver "ati"
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "DPMS" "on"
BusID "PCI:0:18:0"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "Stealth64"
Monitor "Custom 17"
DefaultColorDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Identifier "screen0"
Device "ATI Mach64 3D RAGE II"
Monitor "Custom"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Modes "1280x1024" "1152x768" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1280x1024" "1152x768" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1152x768" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1152x768" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1280x1024" "1152x768" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen0"
Screen "screen1" Rightof "screen0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
