2 cards should work, even on the same IRQ. They DO, however, need different ip addresses. They should then be able to 'ping' each-other, as well as everyone else. Original Message: ----------------- From: fernando@usicomputer.com Date: Wed, 31 Jul 2002 12:04:59 -0600 To: newbie@XFree86.Org Subject: network cards Hi, Does Linux shares irq's? I have an Intel motherboard(S845WD1-E) with two network cards onboard. I loaded RH7.3 and I was able to set the both network cards in the setup process of RH. When I am in RH I can use eth0 to go in the internet but eth1 doesn't work to go in the internet. I ran ifconfig to see the setings for the nic's and I see they have the same irq. Also, I can see the RX and TX packets for both nic's, eth0 has packets but not eth1. How can I make the second card work? Please help. Thanks in advance for your help. Fernando _______________________________________________ Newbie@XFree86.Org *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . _______________________________________________ Newbie@XFree86.Org *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
