Hello,
I'm having trouble setting up the X server under SuSE 8.0 on a dual
Pentium III (Asus Board P2b-DS) with an ELSA Gloria-XL 3D Graphic Card (16
MB VRAM, 24 MB DRAM, GLINT MX Graphicprocessor, GLINT Delta 3D
Coprocessor).
The setup with "sax2" failed (black screen), so I configured it with
"xf86config" but it never works (I also tried some settings manually). The
log file says:
XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
[...]
Build Operating System: SuSE Linux [ELF] SuSE
[...]
(--) PCI:*(0:11:0) unknown vendor (0x1048) unknown chipset (0x8901)
rev 22, Mem @ 0xdc000000/26, BIOS @ 0x000c0000/16
(--) PCI: (0:11:1) 3Dlabs GLINT Delta rev 1, Mem @ 0xdb800000/17
(--) PCI: (0:11:2) 3Dlabs GLINT MX rev 1, Mem @ 0xdb000000/17,
0xd8000000/25, 0xd6000000/25, 0xd4000000/25, BIOS @ 0xe3fa0000/16
[...]
(II) LoadModule: "glint"
(II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o
(II) Module glint: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
(II) Primary Device is: PCI 00:0b:0
(WW) GLINT: No matching Device section for instance (BusID PCI:0:11:1)
found
(WW) GLINT: No matching Device section for instance (BusID PCI:0:11:2)
found
(EE) No devices detected.
Fatal server error:
no screens found
[...]
"/sbin/lspci" gives:
[...]
00:0b.0 VGA compatible controller: Elsa AG: Unknown device 8901 (rev 16)
00:0b.1 Co-processor: 3DLabs GLINT Delta (rev 01)
00:0b.2 Display controller: 3DLabs GLINT MX (rev 01)
Does anybody know how to configure XFree86 4.2.0 for this graphic card ?
Any hints are welcome !
Thanks,
Andreas
_______________________________________________
Newbie@XFree86.Org
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
