Hello all,
I'm having a booger of a time configuring a Diamond Fire GL 3000 card
(single headed) with XF86 4.2.0. Worked perfectly fine with 3.3.6,
before upgrading to RedHat 7.3. Too bad the config files aren't
compatible :(
Symptoms are:
- Upon starting X, monitor goes into standby mode.
CTL-ALT-<minus> brings it back. Periodically, monitor goes into
standby while X is up, and I have to CTL-ALT-<minus> to get the
display back.
- If I leave X up unattended for a while (~30 minutes), the whole
machine locks up, and I have to hit the reset button to recover.
- Gracefully exiting X causes the TTY to go all white, and I can't
see my prompt - have to su and reboot without seeing what I'm typing.
Other weird things:
- Card has 8MB VRAM, 16MB DRAM, but the log shows that it's only
recognizing 8MB when it starts up.
- X is recognizing both the 500TX and Delta chipsets under
different BusID's (as well as an Avance ALG2501).
Specific questions:
Which chipset(s) do I use in my Device section? Do I need to have
Device sections for all? If so, which should be referenced in the
Screen section?
Below is my XF86Config-4 file, and attached is an XFree86.0.log file.
Any help someone can give me will be gratefully appreciated.
Ben
-----------------XF86Config-4 begins
here-----------------------------
# File generated by anaconda.
Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated
together)
# By default, Red Hat 6.0 and later now use a font server independent
of
# the X server to render fonts.
FontPath "unix/:7100"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "dri"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Option "AutoRepeat" "500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "Protocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with
xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
Option "XkbVariant" "basic"
#Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0-86.0
VertRefresh 50.0-120.0
Option "dpms"
# -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync
EndSection
Section "Device"
# no known options
Identifier "Diamond Fire GL 3000"
Driver "glint"
VendorName "Diamond Fire GL 3000"
BoardName "Diamond Fire GL 3000"
Option "FireGL3000"
BusID "PCI:0:16:1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Diamond Fire GL 3000"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
Section "DRI"
Mode 0666
EndSection
=====
__________________________________________________
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com
Attachment:
XFree86.0.log
Description: XFree86.0.log
